Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: vsrini4 <vidya.srinivas@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH] drm/i915: Fix bigjoiner case for DP2.0
Date: Fri, 13 Oct 2023 13:43:46 +0300	[thread overview]
Message-ID: <ZSkfYh9hhca-o0DL@intel.com> (raw)
In-Reply-To: <20231012193000.11917-1-vidya.srinivas@intel.com>

On Fri, Oct 13, 2023 at 01:00:00AM +0530, vsrini4 wrote:
> Patch calculates bigjoiner pipes in mst compute.
> Patch also passes bigjoiner bool to validate plane
> max size.

I doubt this is sufficient. The modeset sequence is still all
wrong for bigjoiner+mst.

> 
> Signed-off-by: vsrini4 <vidya.srinivas@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 19 ++++++++++++-------
>  1 file changed, 12 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index e3f176a093d2..f499ce39b2a8 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -308,6 +308,7 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  				       struct drm_connector_state *conn_state)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
>  	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
>  	struct intel_dp *intel_dp = &intel_mst->primary->dp;
>  	const struct drm_display_mode *adjusted_mode =
> @@ -318,6 +319,10 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
>  
> +	if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay,
> +				    adjusted_mode->crtc_clock))
> +		pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe);
> +
>  	pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->has_pch_encoder = false;
> @@ -936,12 +941,6 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
>  	if (ret)
>  		return ret;
>  
> -	if (mode_rate > max_rate || mode->clock > max_dotclk ||
> -	    drm_dp_calc_pbn_mode(mode->clock, min_bpp, false) > port->full_pbn) {
> -		*status = MODE_CLOCK_HIGH;
> -		return 0;
> -	}
> -
>  	if (mode->clock < 10000) {
>  		*status = MODE_CLOCK_LOW;
>  		return 0;
> @@ -957,6 +956,12 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
>  		max_dotclk *= 2;
>  	}
>  
> +	if (mode_rate > max_rate || mode->clock > max_dotclk ||
> +	    drm_dp_calc_pbn_mode(mode->clock, min_bpp, false) > port->full_pbn) {
> +		*status = MODE_CLOCK_HIGH;
> +		return 0;
> +	}
> +
>  	if (DISPLAY_VER(dev_priv) >= 10 &&
>  	    drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
>  		/*
> @@ -994,7 +999,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
>  	if (mode_rate > max_rate && !dsc)
>  		return MODE_CLOCK_HIGH;
>  
> -	*status = intel_mode_valid_max_plane_size(dev_priv, mode, false);
> +	*status = intel_mode_valid_max_plane_size(dev_priv, mode, bigjoiner);
>  	return 0;
>  }
>  
> -- 
> 2.33.0

-- 
Ville Syrjälä
Intel

  parent reply	other threads:[~2023-10-13 10:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-12 19:30 [Intel-gfx] [PATCH] drm/i915: Fix bigjoiner case for DP2.0 vsrini4
2023-10-13  8:04 ` [Intel-gfx] ✓ Fi.CI.BAT: success for " Patchwork
2023-10-13 10:43 ` Ville Syrjälä [this message]
2023-10-13 10:47   ` [Intel-gfx] [PATCH] " Srinivas, Vidya
2024-01-10  9:25   ` Lisovskiy, Stanislav
2024-01-17  1:20     ` Manasi Navare
2024-02-05 18:30       ` Manasi Navare
2023-10-14  7:49 ` [Intel-gfx] ✓ Fi.CI.IGT: success for " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZSkfYh9hhca-o0DL@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=vidya.srinivas@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox