Re: [PATCH] drm/i915: Add bigjoiner force enable option to debugfs

[Rodrigo Vivi <rodrigo.vivi@intel.com>]

On Tue, Feb 13, 2024 at 05:21:26PM +0200, Lisovskiy, Stanislav wrote:
> On Tue, Feb 13, 2024 at 05:11:37PM +0200, Shankar, Uma wrote:
> > 
> > 
> > > -----Original Message-----
> > > From: Rodrigo Vivi <rodrigo.vivi@intel.com>
> > > Sent: Tuesday, February 13, 2024 8:26 PM
> > > To: Shankar, Uma <uma.shankar@intel.com>
> > > Cc: intel-gfx@lists.freedesktop.org; Lisovskiy, Stanislav
> > > <stanislav.lisovskiy@intel.com>; ville.syrjala@linux.intel.com;
> > > jani.nikula@linux.intel.com
> > > Subject: Re: [PATCH] drm/i915: Add bigjoiner force enable option to debugfs
> > > 
> > > On Mon, Feb 12, 2024 at 06:20:11PM +0530, Uma Shankar wrote:
> > > > From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> > > >
> > > > For validation purposes, it might be useful to be able to force
> > > > Bigjoiner mode, even if current dotclock/resolution do not require
> > > > that.
> > > > Lets add such to option to debugfs.
> > > >
> > > > v2: - Apparently intel_dp_need_bigjoiner can't be used, when
> > > >       debugfs entry is created so lets just check manually
> > > >       the DISPLAY_VER.
> > > >
> > > > v3: - Switch to intel_connector from drm_connector(Jani Nikula)
> > > >     - Remove redundant modeset lock(Jani Nikula)
> > > >     - Use kstrtobool_from_user for boolean value(Jani Nikula)
> > > >
> > > > v4: - Apply the changes to proper function(Jani Nikula)
> > > >
> > > > v5: - Removed unnecessary check from i915_bigjoiner_enable_show
> > > >       (Ville Syrjälä)
> > > >     - Added eDP connector check to intel_connector_debugfs_add
> > > >       (Ville Syrjälä)
> > > >     - Removed debug message in order to prevent dmesg flooding
> > > >       (Ville Syrjälä)
> > > >
> > > > v6: - Assume now always that m->private is intel_connector
> > > >     - Fixed other similar conflicts
> > > >
> > > > v7: - Move bigjoiner force option to intel_connector(Ville Syrjälä)
> > > >     - Use DEFINE_SHOW_STORE_ATTRIBUTE instead of defining fops
> > > >       manually.(Ville Syrjälä)
> > > >
> > > > v8: - Pass intel_connector to debugfs_create_file, instead of drm_connector.
> > > >       (Jani Nikula)
> > > >
> > > > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> > > 
> > > please remind to sign-off when sending someone else's patch.
> > 
> > Oh yeah, sorry missed it. Was filling in for Stan while he was OOO.
> > @Lisovskiy, Stanislav Please address rest of the comments raised by Rodrigo.
> 
> Sorry, had that pushed already in the morning, since it was Acked and I was asked
> to do it asap.

no worries. if you are confident that the _show function magically works I trust
your tests more then my eyes and greps.

> 
> Stan
> 
> > 
> > Regards,
> > Uma Shankar
> > 
> > > > ---
> > > >  .../drm/i915/display/intel_display_debugfs.c  | 47 +++++++++++++++++++
> > > >  .../drm/i915/display/intel_display_types.h    |  2 +
> > > >  drivers/gpu/drm/i915/display/intel_dp.c       |  4 +-
> > > >  3 files changed, 52 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > index 6f2d13c8ccf7..a962b48bcf13 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > > @@ -1391,6 +1391,20 @@ out:	drm_modeset_unlock(&i915-
> > > >drm.mode_config.connection_mutex);
> > > >  	return ret;
> > > >  }
> > > >
> > > > +static int i915_bigjoiner_enable_show(struct seq_file *m, void *data)
> > > > +{
> > > > +	struct intel_connector *connector = m->private;
> > > > +	struct drm_crtc *crtc;
> > > > +
> > > > +	crtc = connector->base.state->crtc;
> > > > +	if (connector->base.status != connector_status_connected || !crtc)
> > > > +		return -ENODEV;
> > > > +
> > > > +	seq_printf(m, "Bigjoiner enable: %d\n",
> > > > +connector->force_bigjoiner_enable);
> > > 
> > > probably better with a yes_or_no string?
> > > 
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > >  static ssize_t i915_dsc_output_format_write(struct file *file,
> > > >  					    const char __user *ubuf,
> > > >  					    size_t len, loff_t *offp)
> > > > @@ -1412,6 +1426,30 @@ static ssize_t i915_dsc_output_format_write(struct
> > > file *file,
> > > >  	return len;
> > > >  }
> > > >
> > > > +static ssize_t i915_bigjoiner_enable_write(struct file *file,
> > > > +					   const char __user *ubuf,
> > > > +					   size_t len, loff_t *offp)
> > > > +{
> > > > +	struct seq_file *m = file->private_data;
> > > > +	struct intel_connector *connector = m->private;
> > > > +	struct drm_crtc *crtc;
> > > > +	bool bigjoiner_en = 0;
> > > > +	int ret;
> > > > +
> > > > +	crtc = connector->base.state->crtc;
> > > > +	if (connector->base.status != connector_status_connected || !crtc)
> > > > +		return -ENODEV;
> > > > +
> > > > +	ret = kstrtobool_from_user(ubuf, len, &bigjoiner_en);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	connector->force_bigjoiner_enable = bigjoiner_en;
> > > > +	*offp += len;
> > > > +
> > > > +	return len;
> > > > +}
> > > > +
> > > >  static int i915_dsc_output_format_open(struct inode *inode,
> > > >  				       struct file *file)
> > > >  {
> > > > @@ -1505,6 +1543,8 @@ static const struct file_operations
> > > i915_dsc_fractional_bpp_fops = {
> > > >  	.write = i915_dsc_fractional_bpp_write  };
> > > >
> > > > +DEFINE_SHOW_STORE_ATTRIBUTE(i915_bigjoiner_enable);
> > > 
> > > I don't believe this macro here is using the defined _show function, but maybe I'm
> > > not following that very well since this macro is not widely used.
> > > 
> > > What about using DEFINE_SIMPLE_ATTRIBUTE instead?
> > > 
> > > > +
> > > >  /*
> > > >   * Returns the Current CRTC's bpc.
> > > >   * Example usage: cat /sys/kernel/debug/dri/0/crtc-0/i915_current_bpc
> > > > @@ -1586,6 +1626,13 @@ void intel_connector_debugfs_add(struct
> > > intel_connector *connector)
> > > >  				    connector, &i915_dsc_fractional_bpp_fops);
> > > >  	}
> > > >
> > > > +	if (DISPLAY_VER(i915) >= 11 &&
> > > > +	    (connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> > > > +	     connector_type == DRM_MODE_CONNECTOR_eDP)) {
> > > 
> > > I wish we had a simpler check, but I couldn't find. :/
> > > 
> > > > +		debugfs_create_file("i915_bigjoiner_force_enable", 0644, root,
> > > > +				    connector, &i915_bigjoiner_enable_fops);
> > > > +	}
> > > > +
> > > >  	if (connector_type == DRM_MODE_CONNECTOR_DSI ||
> > > >  	    connector_type == DRM_MODE_CONNECTOR_eDP ||
> > > >  	    connector_type == DRM_MODE_CONNECTOR_DisplayPort || diff --git
> > > > a/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > index 01eb6e4e6049..0d4012097db1 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > > > @@ -626,6 +626,8 @@ struct intel_connector {
> > > >
> > > >  	struct intel_dp *mst_port;
> > > >
> > > > +	bool force_bigjoiner_enable;
> > > > +
> > > >  	struct {
> > > >  		struct drm_dp_aux *dsc_decompression_aux;
> > > >  		u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE];
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > > > b/drivers/gpu/drm/i915/display/intel_dp.c
> > > > index 5045c34a16be..217196196e50 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > > @@ -1205,11 +1205,13 @@ bool intel_dp_need_bigjoiner(struct intel_dp
> > > *intel_dp,
> > > >  			     int hdisplay, int clock)
> > > >  {
> > > >  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > > > +	struct intel_connector *connector = intel_dp->attached_connector;
> > > >
> > > >  	if (!intel_dp_can_bigjoiner(intel_dp))
> > > >  		return false;
> > > >
> > > > -	return clock > i915->max_dotclk_freq || hdisplay > 5120;
> > > > +	return clock > i915->max_dotclk_freq || hdisplay > 5120 ||
> > > > +	       connector->force_bigjoiner_enable;
> > > 
> > > I'm just not comfortable with the magic _show of that macro and would prefer a
> > > more simple and straight forward and widely used version.
> > > 
> > > Other then that everything else looks good to me.
> > > 
> > > Thanks,
> > > Rodrigo.
> > > 
> > > >  }
> > > >
> > > >  static enum drm_mode_status
> > > > --
> > > > 2.42.0
> > > >