Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915/scaler: Update Pipe src size check in skl_update_scaler
Date: Fri, 15 Mar 2024 10:26:53 +0200	[thread overview]
Message-ID: <ZfQGTfxuYJ0bwQ3z@intel.com> (raw)
In-Reply-To: <20240313143825.3461208-1-ankit.k.nautiyal@intel.com>

On Wed, Mar 13, 2024 at 08:08:25PM +0530, Ankit Nautiyal wrote:
> For Earlier platforms, the Pipe source size is 12-bits so
> max pipe source width and height is 4096. For newer platforms it is
> 13-bits so theoretically max width/height is 8192. For few of the
> earlier platforms the scaler did not use all bits of the PIPESRC,
> so max scaler source size was used to make that the pipe source
> size is programmed within limits, before using scaler.
> 
> This creates a problem, for MTL where scaler source size is 4096, but
> max pipe source width can theroretically be 8192.
> 
> Switch the check to use the max scaler destination size, which closely
> match the limits.
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> ---
>  drivers/gpu/drm/i915/display/skl_scaler.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/skl_scaler.c b/drivers/gpu/drm/i915/display/skl_scaler.c
> index 8a934bada624..baa601d27815 100644
> --- a/drivers/gpu/drm/i915/display/skl_scaler.c
> +++ b/drivers/gpu/drm/i915/display/skl_scaler.c
> @@ -213,10 +213,11 @@ skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
>  	 * The pipe scaler does not use all the bits of PIPESRC, at least
>  	 * on the earlier platforms. So even when we're scaling a plane
>  	 * the *pipe* source size must not be too large. For simplicity
> -	 * we assume the limits match the scaler source size limits. Might
> -	 * not be 100% accurate on all platforms, but good enough for now.
> +	 * we assume the limits match the scaler destination size limits.
> +	 * Might not be 100% accurate on all platforms, but good enough for
> +	 * now.
>  	 */
> -	if (pipe_src_w > max_src_w || pipe_src_h > max_src_h) {
> +	if (pipe_src_w > max_dst_w || pipe_src_h > max_dst_h) {
>  		drm_dbg_kms(&dev_priv->drm,
>  			    "scaler_user index %u.%u: pipe src size %ux%u "
>  			    "is out of scaler range\n",
> -- 
> 2.40.1

-- 
Ville Syrjälä
Intel

  parent reply	other threads:[~2024-03-15  8:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-13 14:38 [PATCH] drm/i915/scaler: Update Pipe src size check in skl_update_scaler Ankit Nautiyal
2024-03-14  1:27 ` ✓ Fi.CI.BAT: success for " Patchwork
2024-03-14 11:07 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-03-15  8:26 ` Ville Syrjälä [this message]
2024-03-20  7:15   ` [PATCH] " Nautiyal, Ankit K

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZfQGTfxuYJ0bwQ3z@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox