Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/probe-helper: Call drm_mode_validate_ycbcr420() before connector->mode_valid()
Date: Tue, 21 May 2024 22:09:35 +0300	[thread overview]
Message-ID: <Zkzxb9QsHTveWe1-@intel.com> (raw)
In-Reply-To: <ZkyO7ybX-pdDiWMR@phenom.ffwll.local>

On Tue, May 21, 2024 at 02:09:19PM +0200, Daniel Vetter wrote:
> On Thu, May 16, 2024 at 08:33:24PM +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > Make life easier for drivers by filtering out unwanted YCbCr 4:2:0
> > only modes prior to calling the connector->mode_valid() hook.
> > Currently drivers will still see YCbCr 4:2:0 only modes in said
> > hook, which will likely come as a suprise when the driver has
> > declared no support for such modes (via setting
> > connector->ycbcr_420_allowed to false).
> > 
> > Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10992
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Sounds reasonable.
> 
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Thanks. Pushed to drm-misc-next.

> 
> > ---
> >  drivers/gpu/drm/drm_probe_helper.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> > index 4f75a1cfd820..249c8c2cb319 100644
> > --- a/drivers/gpu/drm/drm_probe_helper.c
> > +++ b/drivers/gpu/drm/drm_probe_helper.c
> > @@ -474,6 +474,10 @@ static int __drm_helper_update_and_validate(struct drm_connector *connector,
> >  		if (mode->status != MODE_OK)
> >  			continue;
> >  
> > +		mode->status = drm_mode_validate_ycbcr420(mode, connector);
> > +		if (mode->status != MODE_OK)
> > +			continue;
> > +
> >  		ret = drm_mode_validate_pipeline(mode, connector, ctx,
> >  						 &mode->status);
> >  		if (ret) {
> > @@ -486,10 +490,6 @@ static int __drm_helper_update_and_validate(struct drm_connector *connector,
> >  			else
> >  				return -EDEADLK;
> >  		}
> > -
> > -		if (mode->status != MODE_OK)
> > -			continue;
> > -		mode->status = drm_mode_validate_ycbcr420(mode, connector);
> >  	}
> >  
> >  	return 0;
> > -- 
> > 2.44.1
> > 
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch

-- 
Ville Syrjälä
Intel

      reply	other threads:[~2024-05-21 19:09 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-16 17:33 [PATCH] drm/probe-helper: Call drm_mode_validate_ycbcr420() before connector->mode_valid() Ville Syrjala
2024-05-16 20:00 ` ✗ Fi.CI.BAT: failure for " Patchwork
2024-05-16 21:43 ` ✗ Fi.CI.BAT: failure for drm/probe-helper: Call drm_mode_validate_ycbcr420() before connector->mode_valid() (rev2) Patchwork
2024-05-17  1:37 ` ✓ Fi.CI.BAT: success for drm/probe-helper: Call drm_mode_validate_ycbcr420() before connector->mode_valid() (rev3) Patchwork
2024-05-17 10:30 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-05-21 12:09 ` [PATCH] drm/probe-helper: Call drm_mode_validate_ycbcr420() before connector->mode_valid() Daniel Vetter
2024-05-21 19:09   ` Ville Syrjälä [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zkzxb9QsHTveWe1-@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox