From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Nautiyal, Ankit K" <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, stanislav.lisovskiy@intel.com,
jani.saarinen@intel.com
Subject: Re: [PATCH 05/12] drm/i915: Add some essential functionality for joiners
Date: Wed, 21 Aug 2024 16:41:31 +0300 [thread overview]
Message-ID: <ZsXui4i5ddsjS0sc@intel.com> (raw)
In-Reply-To: <a1d82f03-960f-412c-b693-6e2ace5e9a55@intel.com>
On Fri, Aug 16, 2024 at 01:53:20PM +0530, Nautiyal, Ankit K wrote:
>
> On 7/18/2024 1:47 PM, Ankit Nautiyal wrote:
> > From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> >
> > In most of the cases we now try to avoid mentioning things like
> > "bigjoiner" or "ultrajoiner" trying to unify the API and refer
> > mostly to all this functionality as "joiner".
> > In majority cases that should be way to go.
> > However in some cases we still need to distinguish between
> > bigjoiner primaries and secondaries(such as DSC register programming).
> >
> > Create correspondent helper functions and start using them,
> > in order be prepared for adding ultrajoiner functionality.
> >
> > v2: Fixed checkpatch warnings (Ankit)
> >
> > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> > Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> > ---
> > .../gpu/drm/i915/display/intel_atomic_plane.c | 2 +-
> > drivers/gpu/drm/i915/display/intel_display.c | 75 ++++++++++++++++---
> > drivers/gpu/drm/i915/display/intel_display.h | 8 +-
> > .../drm/i915/display/intel_modeset_verify.c | 2 +-
> > drivers/gpu/drm/i915/display/intel_vdsc.c | 4 +-
> > 5 files changed, 76 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > index e979786aa5cf..9862d0339e6a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > @@ -724,7 +724,7 @@ int intel_plane_atomic_check(struct intel_atomic_state *state,
> >
> > if (new_crtc_state && intel_crtc_is_joiner_secondary(new_crtc_state)) {
> > struct intel_crtc *primary_crtc =
> > - intel_primary_crtc(new_crtc_state);
> > + intel_joiner_primary_crtc(new_crtc_state);
> > struct intel_plane *primary_crtc_plane =
> > intel_crtc_get_plane(primary_crtc, plane->id);
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 26e4b0c2e9f7..38e7c6811bf3 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -252,6 +252,68 @@ static enum pipe joiner_primary_pipe(const struct intel_crtc_state *crtc_state)
> > return ffs(crtc_state->joiner_pipes) - 1;
> > }
> >
> > +int intel_joiner_num_pipes(const struct intel_crtc_state *crtc_state)
> > +{
> > + return hweight8(crtc_state->joiner_pipes);
> > +}
> > +
> > +bool intel_crtc_is_ultrajoiner(const struct intel_crtc_state *crtc_state)
> > +{
> > + return intel_joiner_num_pipes(crtc_state) == 4;
>
>
> On having a re-look, I think we need to change this. Currently there is
> no way of knowing if its 2 set of bigjoiners or 1 ultrajoiner.
There is no such thing as 2 sets of bigjoiners on one crtc.
>
> Perhaps need one more bit for ultrajoiner or a different flag altogether.
>
> Regards,
>
> Ankit
>
> > +}
> > +
> > +static bool intel_is_joiner(const struct intel_crtc_state *crtc_state)
> > +{
> > + return intel_joiner_num_pipes(crtc_state) > 1;
> > +}
> > +
> > +static u8 bigjoiner_primary_pipes(const struct intel_crtc_state *crtc_state)
> > +{
> > + int lsb = ffs(crtc_state->joiner_pipes) - 1;
> > + int msb = fls(crtc_state->joiner_pipes) - 1;
> > + int i;
> > + u8 bigjoiner_primary_mask = 0;
> > +
> > + for (i = lsb; i < msb; i += 4) {
> > + /*
> > + * Regardless of how joiner_pipes mask is set, currently
> > + * we always assume, that primary pipe bit goes before secondary
> > + * pipe bit. So in each set of 2 bits, least significant bit is
> > + * bigjoiner primary pipe and most significant bit is secondary pipe.
> > + */
> > + bigjoiner_primary_mask |=
> > + ((BIT(0) | BIT(2)) << i) & crtc_state->joiner_pipes;
> > + }
> > +
> > + return bigjoiner_primary_mask;
> > +}
> > +
> > +bool intel_crtc_is_bigjoiner_primary(const struct intel_crtc_state *crtc_state)
> > +{
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > +
> > + if (!intel_is_joiner(crtc_state))
> > + return false;
> > +
> > + return BIT(crtc->pipe) & bigjoiner_primary_pipes(crtc_state);
> > +}
> > +
> > +bool intel_crtc_is_bigjoiner_secondary(const struct intel_crtc_state *crtc_state)
> > +{
> > + if (!intel_is_joiner(crtc_state))
> > + return false;
> > +
> > + return !intel_crtc_is_bigjoiner_primary(crtc_state);
> > +}
> > +
> > +bool intel_crtc_is_ultrajoiner_primary(const struct intel_crtc_state *crtc_state)
> > +{
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > +
> > + return intel_crtc_is_ultrajoiner(crtc_state) &&
> > + (crtc->pipe == joiner_primary_pipe(crtc_state));
> > +}
> > +
> > u8 intel_crtc_joiner_secondary_pipes(const struct intel_crtc_state *crtc_state)
> > {
> > if (crtc_state->joiner_pipes)
> > @@ -276,11 +338,6 @@ bool intel_crtc_is_joiner_primary(const struct intel_crtc_state *crtc_state)
> > crtc->pipe == joiner_primary_pipe(crtc_state);
> > }
> >
> > -int intel_joiner_num_pipes(const struct intel_crtc_state *crtc_state)
> > -{
> > - return hweight8(crtc_state->joiner_pipes);
> > -}
> > -
> > u8 intel_crtc_joined_pipe_mask(const struct intel_crtc_state *crtc_state)
> > {
> > struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > @@ -288,7 +345,7 @@ u8 intel_crtc_joined_pipe_mask(const struct intel_crtc_state *crtc_state)
> > return BIT(crtc->pipe) | crtc_state->joiner_pipes;
> > }
> >
> > -struct intel_crtc *intel_primary_crtc(const struct intel_crtc_state *crtc_state)
> > +struct intel_crtc *intel_joiner_primary_crtc(const struct intel_crtc_state *crtc_state)
> > {
> > struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
> >
> > @@ -808,7 +865,7 @@ intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
> > int num_encoders = 0;
> > int i;
> >
> > - primary_crtc = intel_primary_crtc(crtc_state);
> > + primary_crtc = intel_joiner_primary_crtc(crtc_state);
> >
> > for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> > if (connector_state->crtc != &primary_crtc->base)
> > @@ -4527,7 +4584,7 @@ copy_joiner_crtc_state_nomodeset(struct intel_atomic_state *state,
> > {
> > struct intel_crtc_state *secondary_crtc_state =
> > intel_atomic_get_new_crtc_state(state, secondary_crtc);
> > - struct intel_crtc *primary_crtc = intel_primary_crtc(secondary_crtc_state);
> > + struct intel_crtc *primary_crtc = intel_joiner_primary_crtc(secondary_crtc_state);
> > const struct intel_crtc_state *primary_crtc_state =
> > intel_atomic_get_new_crtc_state(state, primary_crtc);
> >
> > @@ -4547,7 +4604,7 @@ copy_joiner_crtc_state_modeset(struct intel_atomic_state *state,
> > {
> > struct intel_crtc_state *secondary_crtc_state =
> > intel_atomic_get_new_crtc_state(state, secondary_crtc);
> > - struct intel_crtc *primary_crtc = intel_primary_crtc(secondary_crtc_state);
> > + struct intel_crtc *primary_crtc = intel_joiner_primary_crtc(secondary_crtc_state);
> > const struct intel_crtc_state *primary_crtc_state =
> > intel_atomic_get_new_crtc_state(state, primary_crtc);
> > struct intel_crtc_state *saved_state;
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > index bf665f947b97..35e68e4cc712 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > @@ -424,10 +424,14 @@ enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
> > bool is_trans_port_sync_mode(const struct intel_crtc_state *state);
> > bool is_trans_port_sync_master(const struct intel_crtc_state *state);
> > u8 intel_crtc_joined_pipe_mask(const struct intel_crtc_state *crtc_state);
> > -bool intel_crtc_is_joiner_secondary(const struct intel_crtc_state *crtc_state);
> > bool intel_crtc_is_joiner_primary(const struct intel_crtc_state *crtc_state);
> > +bool intel_crtc_is_joiner_secondary(const struct intel_crtc_state *crtc_state);
> > +bool intel_crtc_is_bigjoiner_primary(const struct intel_crtc_state *crtc_state);
> > +bool intel_crtc_is_bigjoiner_secondary(const struct intel_crtc_state *crtc_state);
> > +bool intel_crtc_is_ultrajoiner(const struct intel_crtc_state *crtc_state);
> > +bool intel_crtc_is_ultrajoiner_primary(const struct intel_crtc_state *crtc_state);
> > u8 intel_crtc_joiner_secondary_pipes(const struct intel_crtc_state *crtc_state);
> > -struct intel_crtc *intel_primary_crtc(const struct intel_crtc_state *crtc_state);
> > +struct intel_crtc *intel_joiner_primary_crtc(const struct intel_crtc_state *crtc_state);
> > bool intel_crtc_get_pipe_config(struct intel_crtc_state *crtc_state);
> > bool intel_pipe_config_compare(const struct intel_crtc_state *current_config,
> > const struct intel_crtc_state *pipe_config,
> > diff --git a/drivers/gpu/drm/i915/display/intel_modeset_verify.c b/drivers/gpu/drm/i915/display/intel_modeset_verify.c
> > index 3491db5cad31..b53b810c6470 100644
> > --- a/drivers/gpu/drm/i915/display/intel_modeset_verify.c
> > +++ b/drivers/gpu/drm/i915/display/intel_modeset_verify.c
> > @@ -193,7 +193,7 @@ verify_crtc_state(struct intel_atomic_state *state,
> > "transitional active state does not match atomic hw state (expected %i, found %i)\n",
> > sw_crtc_state->hw.active, crtc->active);
> >
> > - primary_crtc = intel_primary_crtc(sw_crtc_state);
> > + primary_crtc = intel_joiner_primary_crtc(sw_crtc_state);
> >
> > for_each_encoder_on_crtc(dev, &primary_crtc->base, encoder) {
> > enum pipe pipe;
> > diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
> > index b9687b7692b8..11058bb37d5a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
> > +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
> > @@ -761,7 +761,7 @@ void intel_uncompressed_joiner_enable(const struct intel_crtc_state *crtc_state)
> > u32 dss_ctl1_val = 0;
> >
> > if (crtc_state->joiner_pipes && !crtc_state->dsc.compression_enable) {
> > - if (intel_crtc_is_joiner_secondary(crtc_state))
> > + if (intel_crtc_is_bigjoiner_secondary(crtc_state))
> > dss_ctl1_val |= UNCOMPRESSED_JOINER_SECONDARY;
> > else
> > dss_ctl1_val |= UNCOMPRESSED_JOINER_PRIMARY;
> > @@ -790,7 +790,7 @@ void intel_dsc_enable(const struct intel_crtc_state *crtc_state)
> > }
> > if (crtc_state->joiner_pipes) {
> > dss_ctl1_val |= BIG_JOINER_ENABLE;
> > - if (!intel_crtc_is_joiner_secondary(crtc_state))
> > + if (intel_crtc_is_bigjoiner_primary(crtc_state))
> > dss_ctl1_val |= PRIMARY_BIG_JOINER_ENABLE;
> > }
> > intel_de_write(dev_priv, dss_ctl1_reg(crtc, crtc_state->cpu_transcoder), dss_ctl1_val);
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2024-08-21 13:41 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-18 8:17 [PATCH 00/12] Ultrajoiner basic functionality series Ankit Nautiyal
2024-07-18 8:17 ` [PATCH 01/12] drm/i915/display: Modify debugfs for joiner to force n pipes Ankit Nautiyal
2024-07-31 4:21 ` Kandpal, Suraj
2024-07-18 8:17 ` [PATCH 02/12] drm/i915/display: Use joined pipes in intel_dp_joiner_needs_dsc Ankit Nautiyal
2024-07-31 4:28 ` Kandpal, Suraj
2024-07-18 8:17 ` [PATCH 03/12] drm/i915/display: Use joined pipes in intel_mode_valid_max_plane_size Ankit Nautiyal
2024-07-31 4:43 ` Kandpal, Suraj
2024-07-18 8:17 ` [PATCH 04/12] drm/i915/display: Use joined pipes in dsc helpers for slices, bpp Ankit Nautiyal
2024-07-31 5:10 ` Kandpal, Suraj
2024-07-18 8:17 ` [PATCH 05/12] drm/i915: Add some essential functionality for joiners Ankit Nautiyal
2024-07-31 7:14 ` Kandpal, Suraj
2024-08-16 8:23 ` Nautiyal, Ankit K
2024-08-21 13:41 ` Ville Syrjälä [this message]
2024-08-21 14:48 ` Nautiyal, Ankit K
2024-07-18 8:17 ` [PATCH 06/12] drm/i915: Split current joiner hw state readout Ankit Nautiyal
2024-07-31 7:27 ` Kandpal, Suraj
2024-07-18 8:17 ` [PATCH 07/12] drm/i915: Add bigjoiner and uncompressed joiner hw readout sanity checks Ankit Nautiyal
2024-07-31 8:25 ` Kandpal, Suraj
2024-07-18 8:17 ` [PATCH 08/12] drm/i915: Implement hw state readout and checks for ultrajoiner Ankit Nautiyal
2024-07-31 9:57 ` Kandpal, Suraj
2024-07-18 8:18 ` [PATCH 09/12] drm/i915/display/vdsc: Add ultrajoiner support with DSC Ankit Nautiyal
2024-08-01 6:41 ` Kandpal, Suraj
2024-07-18 8:18 ` [PATCH 10/12] drm/i915: Compute config and mode valid changes for ultrajoiner Ankit Nautiyal
2024-07-31 10:29 ` Kandpal, Suraj
2024-07-18 8:18 ` [PATCH 11/12] drm/i915: Add new abstraction layer to handle pipe order for different joiners Ankit Nautiyal
2024-08-01 7:12 ` Kandpal, Suraj
2024-07-18 8:18 ` [PATCH 12/12] drm/i915/intel_dp: Add support for forcing ultrajoiner Ankit Nautiyal
2024-08-01 7:13 ` Kandpal, Suraj
2024-07-18 8:45 ` ✗ Fi.CI.CHECKPATCH: warning for Ultrajoiner basic functionality series (rev6) Patchwork
2024-07-18 8:45 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-07-18 8:54 ` ✓ Fi.CI.BAT: success " Patchwork
2024-07-19 5:35 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZsXui4i5ddsjS0sc@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.saarinen@intel.com \
--cc=stanislav.lisovskiy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox