From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: He Lugang <helugang@uniontech.com>
Cc: <jani.nikula@linux.intel.com>, <joonas.lahtinen@linux.intel.com>,
<tursulin@ursulin.net>, <airlied@gmail.com>, <daniel@ffwll.ch>,
<intel-gfx@lists.freedesktop.org>,
<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH] drm/i915:Remove unused parameter in marco.
Date: Thu, 5 Sep 2024 13:04:55 -0400 [thread overview]
Message-ID: <Ztnkt8guUcY8hg3h@intel.com> (raw)
In-Reply-To: <F84191BE8AA4A690+20240831135114.497043-1-helugang@uniontech.com>
On Sat, Aug 31, 2024 at 09:51:14PM +0800, He Lugang wrote:
> The parameter dev_priv is actually not used in macro PORT_ALPM_CTL
> and PORT_ALPM_LFPS_CTL,so remove it to simplify the code.
It is magically used on our back... hence the build failures that CI got.
Jani is doing a great clean-up work on the display code to get rid
of this 'dev_priv' usages in favor of a better display code separation
and using intel_display struct.
But thanks for the patch and the interest to help.
>
> Signed-off-by: He Lugang <helugang@uniontech.com>
> ---
> drivers/gpu/drm/i915/display/intel_alpm.c | 4 ++--
> drivers/gpu/drm/i915/display/intel_psr.c | 2 +-
> drivers/gpu/drm/i915/display/intel_psr_regs.h | 4 ++--
> 3 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c
> index 82ee778b2efe..7a93ba627aa6 100644
> --- a/drivers/gpu/drm/i915/display/intel_alpm.c
> +++ b/drivers/gpu/drm/i915/display/intel_alpm.c
> @@ -330,7 +330,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp,
> ALPM_CTL_AUX_LESS_WAKE_TIME(intel_dp->alpm_parameters.aux_less_wake_lines);
>
> intel_de_write(display,
> - PORT_ALPM_CTL(display, port),
> + PORT_ALPM_CTL(port),
> PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE |
> PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) |
> PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) |
> @@ -338,7 +338,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp,
> intel_dp->alpm_parameters.silence_period_sym_clocks));
>
> intel_de_write(display,
> - PORT_ALPM_LFPS_CTL(display, port),
> + PORT_ALPM_LFPS_CTL(port),
> PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) |
> PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION(
> intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
> index 257526362b39..d66dbb529e1d 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -2076,7 +2076,7 @@ static void intel_psr_disable_locked(struct intel_dp *intel_dp)
> ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0);
>
> intel_de_rmw(dev_priv,
> - PORT_ALPM_CTL(dev_priv, cpu_transcoder),
> + PORT_ALPM_CTL(cpu_transcoder),
> PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0);
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> index 642bb15fb547..b4984e589d7e 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h
> @@ -295,7 +295,7 @@
>
> #define _PORT_ALPM_CTL_A 0x16fa2c
> #define _PORT_ALPM_CTL_B 0x16fc2c
> -#define PORT_ALPM_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B)
> +#define PORT_ALPM_CTL(port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B)
> #define PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE REG_BIT(31)
> #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK REG_GENMASK(23, 20)
> #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(val) REG_FIELD_PREP(PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK, val)
> @@ -306,7 +306,7 @@
>
> #define _PORT_ALPM_LFPS_CTL_A 0x16fa30
> #define _PORT_ALPM_LFPS_CTL_B 0x16fc30
> -#define PORT_ALPM_LFPS_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B)
> +#define PORT_ALPM_LFPS_CTL(port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B)
> #define PORT_ALPM_LFPS_CTL_LFPS_START_POLARITY REG_BIT(31)
> #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MASK REG_GENMASK(27, 24)
> #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MIN 7
> --
> 2.45.2
>
next prev parent reply other threads:[~2024-09-05 17:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-31 13:51 [PATCH] drm/i915:Remove unused parameter in marco He Lugang
2024-09-02 12:16 ` ✗ Fi.CI.BAT: failure for " Patchwork
2024-09-05 12:06 ` ✗ Fi.CI.BUILD: failure for drm/i915:Remove unused parameter in marco. (rev2) Patchwork
2024-09-05 17:04 ` Rodrigo Vivi [this message]
2024-09-05 17:08 ` [PATCH] drm/i915:Remove unused parameter in marco Jani Nikula
2024-09-06 6:06 ` HeLuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Ztnkt8guUcY8hg3h@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=helugang@uniontech.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=joonas.lahtinen@linux.intel.com \
--cc=tursulin@ursulin.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox