Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: intel-gfx@lists.freedesktop.org, jani.nikula@intel.com,
	ville.syrjala@intel.com, ankit.k.nautiyal@intel.com,
	uma.shankar@intel.com
Subject: Re: [PATCH v13 3/3] drm/i915/panelreplay: Panel replay workaround with VRR
Date: Wed, 9 Oct 2024 10:30:39 +0300	[thread overview]
Message-ID: <ZwYxHyd_kzF-WaXj@intel.com> (raw)
In-Reply-To: <20241001134703.1128487-4-mitulkumar.ajitkumar.golani@intel.com>

On Tue, Oct 01, 2024 at 07:17:03PM +0530, Mitul Golani wrote:
> From: Animesh Manna <animesh.manna@intel.com>
> 
> Panel Replay VSC SDP not getting sent when VRR is enabled
> and W1 and W2 are 0. So Program Set Context Latency in
> TRANS_SET_CONTEXT_LATENCY register to at least a value of 1.
> The same is applicable for PSR1/PSR2 as well.
> 
> HSD: 14015406119
> 
> v1: Initial version.
> v2: Update timings stored in adjusted_mode struct. [Ville]
> v3: Add WA in compute_config(). [Ville]
> v4:
> - Add DISPLAY_VER() check and improve code comment. [Rodrigo]
> - Introduce centralized intel_crtc_vblank_delay(). [Ville]
> v5: Move to crtc_compute_config(). [Ville]
> v6: Restrict DISPLAY_VER till 14. [Mitul]
> v7:
> - Corrected code-comment. [Mitul]
> - dev_priv local variable removed. [Jani]
> v8: Introduce late_compute_config() which will take care late
> vblank-delay adjustment. [Ville]
> v9: Implementation simplified and split into multiple patches.
> v10:
> - Split vrr changes and use struct intel_display in DISPLAY_VER(). [Ankit]
> - Use for_each_new_intel_connector_in_state(). [Jani]
> v11: Remove loop and use flipline instead of vrr.enable flag. [Ville]
> v12:
> - Use intel_Vrr_possible helper.
> - Correct flag check for flipline.
> 
> Signed-off-by: Animesh Manna <animesh.manna@intel.com>
> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_display.h |  1 +
>  2 files changed, 22 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index c59d7bffbf57..a8f846b654e9 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -2573,6 +2573,8 @@ static int intel_crtc_compute_config(struct intel_atomic_state *state,
>  		intel_atomic_get_new_crtc_state(state, crtc);
>  	int ret;
>  
> +	intel_crtc_adjust_vblank_delay(crtc_state);
> +
>  	ret = intel_dpll_crtc_compute_clock(state, crtc);
>  	if (ret)
>  		return ret;
> @@ -3985,6 +3987,25 @@ bool intel_crtc_get_pipe_config(struct intel_crtc_state *crtc_state)
>  	return true;
>  }
>  
> +void intel_crtc_adjust_vblank_delay(struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_display *display = to_intel_display(crtc_state);
> +	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
> +
> +	/*
> +	 * wa_14015401596 for display versions 13, 14.
> +	 * Program Set Context Latency in TRANS_SET_CONTEXT_LATENCY register
> +	 * to at least a value of 1 when PSR1/PSR2/Panel Replay is enabled with VRR.
> +	 * Value for TRANS_SET_CONTEXT_LATENCY is calculated by substracting
> +	 * crtc_vdisplay from crtc_vblank_start, so incrementing crtc_vblank_start
> +	 * by 1 if both are equal.

You're just paraphrasing the code in different words here. 
Please don't, and just drop the whole comment (apart from the
w/a number ofc).

> +	 */
> +	if (intel_vrr_possible(crtc_state) && crtc_state->has_psr &&
> +	    adjusted_mode->crtc_vblank_start == adjusted_mode->crtc_vdisplay &&
> +	    IS_DISPLAY_VER(display, 13, 14))
> +		adjusted_mode->crtc_vblank_start += 1;
> +}
> +
>  int intel_dotclock_calculate(int link_freq,
>  			     const struct intel_link_m_n *m_n)
>  {
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 1f0fed5ea7bc..e6bd03ef104d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -446,6 +446,7 @@ u8 _intel_modeset_primary_pipes(const struct intel_crtc_state *crtc_state);
>  u8 _intel_modeset_secondary_pipes(const struct intel_crtc_state *crtc_state);
>  struct intel_crtc *intel_primary_crtc(const struct intel_crtc_state *crtc_state);
>  bool intel_crtc_get_pipe_config(struct intel_crtc_state *crtc_state);
> +void intel_crtc_adjust_vblank_delay(struct intel_crtc_state *crtc_state);
>  bool intel_pipe_config_compare(const struct intel_crtc_state *current_config,
>  			       const struct intel_crtc_state *pipe_config,
>  			       bool fastset);
> -- 
> 2.46.0

-- 
Ville Syrjälä
Intel

  parent reply	other threads:[~2024-10-09  7:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-01 13:47 [PATCH v13 0/3] VRR refactoring and panel replay workaround Mitul Golani
2024-10-01 13:47 ` [PATCH v13 1/3] drm/i915/vrr: Add helper to check if vrr possible Mitul Golani
2024-10-01 14:06   ` Cavitt, Jonathan
2024-10-09  9:13     ` Golani, Mitulkumar Ajitkumar
2024-10-09  7:24   ` Ville Syrjälä
2024-10-09  9:22     ` Golani, Mitulkumar Ajitkumar
2024-10-01 13:47 ` [PATCH v13 2/3] drm/i915/vrr: Split vrr-compute-config in two phases Mitul Golani
2024-10-01 14:10   ` Cavitt, Jonathan
2024-10-09  9:16     ` Golani, Mitulkumar Ajitkumar
2024-10-01 13:47 ` [PATCH v13 3/3] drm/i915/panelreplay: Panel replay workaround with VRR Mitul Golani
2024-10-01 15:07   ` Cavitt, Jonathan
2024-10-09  9:18     ` Golani, Mitulkumar Ajitkumar
2024-10-09  7:30   ` Ville Syrjälä [this message]
2024-10-09  9:19     ` Golani, Mitulkumar Ajitkumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZwYxHyd_kzF-WaXj@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=mitulkumar.ajitkumar.golani@intel.com \
    --cc=uma.shankar@intel.com \
    --cc=ville.syrjala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox