From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm: Nuke drm_calc_{h,v}scale_relaxed()
Date: Thu, 7 Feb 2019 13:07:49 +0100 [thread overview]
Message-ID: <a3279146-e9f3-67f2-3562-7bba54a830c3@linux.intel.com> (raw)
In-Reply-To: <20190206183204.21127-1-ville.syrjala@linux.intel.com>
Op 06-02-2019 om 19:32 schreef Ville Syrjala:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> The fuzzy drm_calc_{h,v}scale_relaxed() helpers are no longer used.
> Throw them in the bin.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/drm_rect.c | 108 -------------------------------------
> include/drm/drm_rect.h | 6 ---
> 2 files changed, 114 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_rect.c b/drivers/gpu/drm/drm_rect.c
> index 8c057829b804..66c41b12719c 100644
> --- a/drivers/gpu/drm/drm_rect.c
> +++ b/drivers/gpu/drm/drm_rect.c
> @@ -207,114 +207,6 @@ int drm_rect_calc_vscale(const struct drm_rect *src,
> }
> EXPORT_SYMBOL(drm_rect_calc_vscale);
>
> -/**
> - * drm_calc_hscale_relaxed - calculate the horizontal scaling factor
> - * @src: source window rectangle
> - * @dst: destination window rectangle
> - * @min_hscale: minimum allowed horizontal scaling factor
> - * @max_hscale: maximum allowed horizontal scaling factor
> - *
> - * Calculate the horizontal scaling factor as
> - * (@src width) / (@dst width).
> - *
> - * If the calculated scaling factor is below @min_vscale,
> - * decrease the height of rectangle @dst to compensate.
> - *
> - * If the calculated scaling factor is above @max_vscale,
> - * decrease the height of rectangle @src to compensate.
> - *
> - * If the scale is below 1 << 16, round down. If the scale is above
> - * 1 << 16, round up. This will calculate the scale with the most
> - * pessimistic limit calculation.
> - *
> - * RETURNS:
> - * The horizontal scaling factor.
> - */
> -int drm_rect_calc_hscale_relaxed(struct drm_rect *src,
> - struct drm_rect *dst,
> - int min_hscale, int max_hscale)
> -{
> - int src_w = drm_rect_width(src);
> - int dst_w = drm_rect_width(dst);
> - int hscale = drm_calc_scale(src_w, dst_w);
> -
> - if (hscale < 0 || dst_w == 0)
> - return hscale;
> -
> - if (hscale < min_hscale) {
> - int max_dst_w = src_w / min_hscale;
> -
> - drm_rect_adjust_size(dst, max_dst_w - dst_w, 0);
> -
> - return min_hscale;
> - }
> -
> - if (hscale > max_hscale) {
> - int max_src_w = dst_w * max_hscale;
> -
> - drm_rect_adjust_size(src, max_src_w - src_w, 0);
> -
> - return max_hscale;
> - }
> -
> - return hscale;
> -}
> -EXPORT_SYMBOL(drm_rect_calc_hscale_relaxed);
> -
> -/**
> - * drm_rect_calc_vscale_relaxed - calculate the vertical scaling factor
> - * @src: source window rectangle
> - * @dst: destination window rectangle
> - * @min_vscale: minimum allowed vertical scaling factor
> - * @max_vscale: maximum allowed vertical scaling factor
> - *
> - * Calculate the vertical scaling factor as
> - * (@src height) / (@dst height).
> - *
> - * If the calculated scaling factor is below @min_vscale,
> - * decrease the height of rectangle @dst to compensate.
> - *
> - * If the calculated scaling factor is above @max_vscale,
> - * decrease the height of rectangle @src to compensate.
> - *
> - * If the scale is below 1 << 16, round down. If the scale is above
> - * 1 << 16, round up. This will calculate the scale with the most
> - * pessimistic limit calculation.
> - *
> - * RETURNS:
> - * The vertical scaling factor.
> - */
> -int drm_rect_calc_vscale_relaxed(struct drm_rect *src,
> - struct drm_rect *dst,
> - int min_vscale, int max_vscale)
> -{
> - int src_h = drm_rect_height(src);
> - int dst_h = drm_rect_height(dst);
> - int vscale = drm_calc_scale(src_h, dst_h);
> -
> - if (vscale < 0 || dst_h == 0)
> - return vscale;
> -
> - if (vscale < min_vscale) {
> - int max_dst_h = src_h / min_vscale;
> -
> - drm_rect_adjust_size(dst, 0, max_dst_h - dst_h);
> -
> - return min_vscale;
> - }
> -
> - if (vscale > max_vscale) {
> - int max_src_h = dst_h * max_vscale;
> -
> - drm_rect_adjust_size(src, 0, max_src_h - src_h);
> -
> - return max_vscale;
> - }
> -
> - return vscale;
> -}
> -EXPORT_SYMBOL(drm_rect_calc_vscale_relaxed);
> -
> /**
> * drm_rect_debug_print - print the rectangle information
> * @prefix: prefix string
> diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
> index 6c54544a4be7..6195820aa5c5 100644
> --- a/include/drm/drm_rect.h
> +++ b/include/drm/drm_rect.h
> @@ -182,12 +182,6 @@ int drm_rect_calc_hscale(const struct drm_rect *src,
> int drm_rect_calc_vscale(const struct drm_rect *src,
> const struct drm_rect *dst,
> int min_vscale, int max_vscale);
> -int drm_rect_calc_hscale_relaxed(struct drm_rect *src,
> - struct drm_rect *dst,
> - int min_hscale, int max_hscale);
> -int drm_rect_calc_vscale_relaxed(struct drm_rect *src,
> - struct drm_rect *dst,
> - int min_vscale, int max_vscale);
> void drm_rect_debug_print(const char *prefix,
> const struct drm_rect *r, bool fixed_point);
> void drm_rect_rotate(struct drm_rect *r,
Good riddance.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2019-02-07 12:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-06 18:32 [PATCH] drm: Nuke drm_calc_{h,v}scale_relaxed() Ville Syrjala
2019-02-06 18:35 ` Alex Deucher
2019-02-06 19:29 ` ✓ Fi.CI.BAT: success for " Patchwork
2019-02-06 21:47 ` ✓ Fi.CI.IGT: " Patchwork
2019-02-07 12:07 ` Maarten Lankhorst [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a3279146-e9f3-67f2-3562-7bba54a830c3@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox