From: Imre Deak <imre.deak@intel.com>
To: Lee Shawn C <shawn.c.lee@intel.com>
Cc: <intel-gfx@lists.freedesktop.org>,
Shankar Uma <uma.shankar@intel.com>,
Jani Nikula <jani.nikula@intel.com>,
Vidya Srinivas <vidya.srinivas@intel.com>
Subject: Re: [PATCH 1/2] drm/i915/hdmi: add debugfs to contorl HDMI bpc
Date: Thu, 28 Aug 2025 17:03:09 +0300 [thread overview]
Message-ID: <aLBhnTs7wvsUcceu@ideak-desk> (raw)
In-Reply-To: <20250828080649.186452-1-shawn.c.lee@intel.com>
On Thu, Aug 28, 2025 at 08:06:48AM +0000, Lee Shawn C wrote:
> While performing HDMI compliance testing, test equipment may request
> different bpc output for signal measurement. However, display driver
> typically determines the maximum available bpc based on HW bandwidth.
> This change leverages the existing debugfs (intel_force_link_bpp)
> to manage HDMI bpc, and making it easier to pass HDMI CTS.
>
> v2: Using exist variable max_requested_bpc.
> v3: Extend intel_force_link_bpp to support HDMI as suggested by Imre.
> v4: Update commit message suggested by Jani.
>
> Cc: Shankar Uma <uma.shankar@intel.com>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Imre Deak <imre.deak@intel.com>
> Cc: Vidya Srinivas <vidya.srinivas@intel.com>
> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
> ---
> drivers/gpu/drm/i915/display/g4x_hdmi.c | 5 +----
> drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++++
> drivers/gpu/drm/i915/display/intel_link_bw.c | 6 +-----
> 3 files changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/g4x_hdmi.c b/drivers/gpu/drm/i915/display/g4x_hdmi.c
> index 108ebd97f9e4..b31fb1e4bc1a 100644
> --- a/drivers/gpu/drm/i915/display/g4x_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/g4x_hdmi.c
> @@ -136,11 +136,8 @@ static int g4x_hdmi_compute_config(struct intel_encoder *encoder,
> struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state);
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
>
> - if (HAS_PCH_SPLIT(display)) {
> + if (HAS_PCH_SPLIT(display))
> crtc_state->has_pch_encoder = true;
> - if (!intel_fdi_compute_pipe_bpp(crtc_state))
g4x_hdmi.c doesn't need to included intel_fdi.h after this change. With
that include removed, the patch looks ok to me:
Reviewed-by: Imre Deak <imre.deak@intel.com>
> - return -EINVAL;
> - }
>
> if (display->platform.g4x)
> crtc_state->has_hdmi_sink = g4x_compute_has_hdmi_sink(state, crtc);
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index cbee628eb26b..027e8ed0cea8 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -55,6 +55,7 @@
> #include "intel_display_regs.h"
> #include "intel_display_types.h"
> #include "intel_dp.h"
> +#include "intel_fdi.h"
> #include "intel_gmbus.h"
> #include "intel_hdcp.h"
> #include "intel_hdcp_regs.h"
> @@ -2345,6 +2346,9 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
> if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
> pipe_config->pixel_multiplier = 2;
>
> + if (!intel_fdi_compute_pipe_bpp(pipe_config))
> + return -EINVAL;
> +
> pipe_config->has_audio =
> intel_hdmi_has_audio(encoder, pipe_config, conn_state) &&
> intel_audio_compute_config(encoder, pipe_config, conn_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_link_bw.c b/drivers/gpu/drm/i915/display/intel_link_bw.c
> index 3caef7f9c7c4..d194a366ff10 100644
> --- a/drivers/gpu/drm/i915/display/intel_link_bw.c
> +++ b/drivers/gpu/drm/i915/display/intel_link_bw.c
> @@ -449,6 +449,7 @@ void intel_link_bw_connector_debugfs_add(struct intel_connector *connector)
> switch (connector->base.connector_type) {
> case DRM_MODE_CONNECTOR_DisplayPort:
> case DRM_MODE_CONNECTOR_eDP:
> + case DRM_MODE_CONNECTOR_HDMIA:
> break;
> case DRM_MODE_CONNECTOR_VGA:
> case DRM_MODE_CONNECTOR_SVIDEO:
> @@ -457,11 +458,6 @@ void intel_link_bw_connector_debugfs_add(struct intel_connector *connector)
> if (HAS_FDI(display))
> break;
>
> - return;
> - case DRM_MODE_CONNECTOR_HDMIA:
> - if (HAS_FDI(display) && !HAS_DDI(display))
> - break;
> -
> return;
> default:
> return;
> --
> 2.34.1
>
next prev parent reply other threads:[~2025-08-28 14:03 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-06 4:20 [PATCH] drm/i915/hdmi: add debugfs to contorl HDMI bpc Lee Shawn C
2025-08-06 13:27 ` Jani Nikula
2025-08-06 14:05 ` Imre Deak
2025-08-06 14:19 ` Imre Deak
2025-08-06 22:40 ` Lee, Shawn C
2025-08-06 16:31 ` ✓ i915.CI.BAT: success for " Patchwork
2025-08-06 19:15 ` ✓ i915.CI.Full: " Patchwork
2025-08-08 9:16 ` [v2] " Lee Shawn C
2025-08-08 9:39 ` Imre Deak
2025-08-11 6:46 ` Lee, Shawn C
2025-08-14 17:35 ` Imre Deak
2025-08-21 8:20 ` Lee, Shawn C
2025-08-08 10:29 ` ✓ i915.CI.BAT: success for drm/i915/hdmi: add debugfs to contorl HDMI bpc (rev2) Patchwork
2025-08-08 13:22 ` ✗ i915.CI.Full: failure " Patchwork
2025-08-26 7:05 ` [v3] drm/i915/hdmi: add debugfs to contorl HDMI bpc Lee Shawn C
2025-08-26 7:48 ` Jani Nikula
2025-08-26 7:53 ` Lee, Shawn C
2025-08-26 8:01 ` [v4] " Lee Shawn C
2025-08-27 9:23 ` Imre Deak
2025-08-26 8:13 ` ✗ i915.CI.BAT: failure for drm/i915/hdmi: add debugfs to contorl HDMI bpc (rev3) Patchwork
2025-08-26 11:29 ` ✓ i915.CI.BAT: success for drm/i915/hdmi: add debugfs to contorl HDMI bpc (rev4) Patchwork
2025-08-26 17:23 ` ✓ i915.CI.Full: " Patchwork
2025-08-28 8:06 ` [PATCH 1/2] drm/i915/hdmi: add debugfs to contorl HDMI bpc Lee Shawn C
2025-08-28 8:06 ` [PATCH 2/2] drm/i915: compute pipe bpp from link bandwidth management Lee Shawn C
2025-08-28 14:10 ` Imre Deak
2025-08-28 14:03 ` Imre Deak [this message]
2025-09-01 5:57 ` [PATCH 0/2] drm/i915: control HDMI output bpc Lee Shawn C
2025-09-01 5:57 ` [PATCH 1/2] drm/i915/hdmi: add debugfs to contorl HDMI bpc Lee Shawn C
2025-09-01 5:57 ` [PATCH 2/2] drm/i915: compute pipe bpp from link bandwidth management Lee Shawn C
2025-09-01 8:30 ` ✓ i915.CI.BAT: success for drm/i915/hdmi: add debugfs to contorl HDMI bpc (rev7) Patchwork
2025-09-01 11:12 ` ✓ i915.CI.Full: " Patchwork
2025-09-02 10:55 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aLBhnTs7wvsUcceu@ideak-desk \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=shawn.c.lee@intel.com \
--cc=uma.shankar@intel.com \
--cc=vidya.srinivas@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox