Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
To: Dave Airlie <airlied@gmail.com>, Simona Vetter <simona.vetter@ffwll.ch>
Cc: "Jani Nikula" <jani.nikula@linux.intel.com>,
	"Joonas Lahtinen" <joonas.lahtinen@linux.intel.com>,
	"Tvrtko Ursulin" <tursulin@ursulin.net>,
	"Rodrigo Vivi" <rodrigo.vivi@intel.com>,
	"Thomas Zimmermann" <tzimmermann@suse.de>,
	"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Matthew Brost" <matthew.brost@intel.com>,
	"Thomas Hellström" <thomas.hellstrom@linux.intel.com>,
	"Oded Gabbay" <ogabbay@kernel.org>,
	dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
	intel-xe@lists.freedesktop.org, dim-tools@lists.freedesktop.org
Subject: [PULL] drm-xe-next
Date: Thu, 21 May 2026 20:38:38 +0200	[thread overview]
Message-ID: <ag9RLujZiYYnSc_F@fedora> (raw)

Hi Dave and Simona,

Here's this week's drm-xe-next PR towards 7.2.

Series highlights:

- drm/xe: Refresh MEMIRQ code
  9/9 patches pushed
  Updates the memory-based interrupt (MEMIRQ) code following a new
  programming note. Moves the IRQ page definition into the HW engine
  definition, makes internal page layout macros private, reduces buffer
  sizes, and drops cached iosys_map references for the status and mask
  pages to simplify the implementation.
  (Michal Wajdeczko)

- drm/xe: Make drm_driver const
  7/7 patches pushed
  Removes runtime modifications to the drm_driver struct that were used
  to conditionally enable display support. Replaces this with updates to
  drm_device.driver_features bits instead, following the existing
  driver_features design. Also cleans up display driver hooks, stubs, and
  removes unused includes.
  (Michal Wajdeczko)

- Fix MCR inconsistencies in RTP tables
  7/7 patches pushed
  The Xe RTP (Register Table Programming) tables had inconsistencies
  between MCR and non-MCR register types. Adds a sanity check to catch
  such mismatches, extracts a helper for steering type range queries,
  and converts several registers (CACHE_MODE_1, COMMON_SLICE_CHICKEN1,
  COMMON_SLICE_CHICKEN4) to their correct MCR definitions.
  (Gustavo Sousa)

Single patches:

- drm/xe/oa: Fix exec_queue leak on width check in stream open (Shuicheng Lin)
- drm/xe/guc: Use xe_device_is_l2_flush_optimized() (Gustavo Sousa)
- drm/xe/multi_queue: Fix secondary queue error case (Niranjana Vishwanathapura)
- drm/xe/pf: Fix CFI failure in debugfs access (Mohanram Meenakshisundaram)
- drm/xe/vf: Fix signature of print functions (Michal Wajdeczko)
- drm/xe/sriov: Mark NVL as SR-IOV capable (Jakub Kolakowski)
- drm/xe/gt_idle: Use NSEC_PER_MSEC instead of float literal (Shuicheng Lin)
- drm/xe/gsc: Fix double-free of managed BO in error path (Shuicheng Lin)

drm-xe-next-2026-05-21:
Driver Changes:
- drm/xe/oa: Fix exec_queue leak on width check in stream open (Shuicheng Lin)
- drm/xe/memirq: Drop cached iosys_map for MEMIRQ status (Michal Wajdeczko)
- drm/xe/memirq: Drop cached iosys_map for MEMIRQ mask (Michal Wajdeczko)
- drm/xe/memirq: Dump all source pages if MSI-X (Michal Wajdeczko)
- drm/xe/memirq: Update diagnostic message (Michal Wajdeczko)
- drm/xe/memirq: Reduce buffer size (Michal Wajdeczko)
- drm/xe/memirq: Use IRQ page from HW engine definition (Michal Wajdeczko)
- drm/xe/memirq: Update GuC initialization and IRQ handler (Michal Wajdeczko)
- drm/xe/memirq: Make page layout macros private (Michal Wajdeczko)
- drm/xe: Add IRQ page to HW engine definition (Michal Wajdeczko)
- drm/xe/guc: Use xe_device_is_l2_flush_optimized() (Gustavo Sousa)
- drm/xe/multi_queue: Fix secondary queue error case (Niranjana Vishwanathapura)
- drm/xe/reg_sr: Do sanity check for MCR vs non-MCR (Gustavo Sousa)
- drm/xe/mcr: Extract reg_in_steering_type_ranges() (Gustavo Sousa)
- drm/xe/kunit: Use KUNIT_EXPECT_EQ() in xe_wa_gt() (Gustavo Sousa)
- drm/xe: Extract xe_hw_engine_setup_reg_lrc() (Gustavo Sousa)
- drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN4 (Gustavo Sousa)
- drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN1 (Gustavo Sousa)
- drm/xe: Define CACHE_MODE_1 as MCR register (Gustavo Sousa)
- drm/xe/pf: Fix CFI failure in debugfs access (Mohanram Meenakshisundaram)
- drm/xe/vf: Fix signature of print functions (Michal Wajdeczko)
- drm/xe: Make drm_driver const (Michal Wajdeczko)
- drm/xe/display: Drop xe_display_driver_set_hooks() (Michal Wajdeczko)
- drm/xe/display: Add macro with display driver features (Michal Wajdeczko)
- drm/xe/display: Add macro with display driver ops (Michal Wajdeczko)
- drm/xe/display: Prefer forward declarations (Michal Wajdeczko)
- drm/xe/display: Drop xe_display_driver_remove() stub (Michal Wajdeczko)
- drm/xe: Drop unused drm/drm_atomic_helper.h include (Michal Wajdeczko)
- drm/xe/sriov: Mark NVL as SR-IOV capable (Jakub Kolakowski)
- drm/xe/gt_idle: Use NSEC_PER_MSEC instead of float literal (Shuicheng Lin)
- drm/xe/gsc: Fix double-free of managed BO in error path (Shuicheng Lin)
The following changes since commit 2ddedd4b7b7c329dd65358025cba8652675bec3d:

  drm/xe/memirq: Enable GT_MI_USER_INTERRUPT only (2026-05-13 20:11:21 +0200)

are available in the Git repository at:

  https://gitlab.freedesktop.org/drm/xe/kernel.git tags/drm-xe-next-2026-05-21

for you to fetch changes up to 339fa0be9e4a5d69fa47e91f4a36574224fb478f:

  drm/xe/oa: Fix exec_queue leak on width check in stream open (2026-05-19 08:48:46 -0700)

----------------------------------------------------------------
Driver Changes:
- drm/xe/oa: Fix exec_queue leak on width check in stream open (Shuicheng Lin)
- drm/xe/memirq: Drop cached iosys_map for MEMIRQ status (Michal Wajdeczko)
- drm/xe/memirq: Drop cached iosys_map for MEMIRQ mask (Michal Wajdeczko)
- drm/xe/memirq: Dump all source pages if MSI-X (Michal Wajdeczko)
- drm/xe/memirq: Update diagnostic message (Michal Wajdeczko)
- drm/xe/memirq: Reduce buffer size (Michal Wajdeczko)
- drm/xe/memirq: Use IRQ page from HW engine definition (Michal Wajdeczko)
- drm/xe/memirq: Update GuC initialization and IRQ handler (Michal Wajdeczko)
- drm/xe/memirq: Make page layout macros private (Michal Wajdeczko)
- drm/xe: Add IRQ page to HW engine definition (Michal Wajdeczko)
- drm/xe/guc: Use xe_device_is_l2_flush_optimized() (Gustavo Sousa)
- drm/xe/multi_queue: Fix secondary queue error case (Niranjana Vishwanathapura)
- drm/xe/reg_sr: Do sanity check for MCR vs non-MCR (Gustavo Sousa)
- drm/xe/mcr: Extract reg_in_steering_type_ranges() (Gustavo Sousa)
- drm/xe/kunit: Use KUNIT_EXPECT_EQ() in xe_wa_gt() (Gustavo Sousa)
- drm/xe: Extract xe_hw_engine_setup_reg_lrc() (Gustavo Sousa)
- drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN4 (Gustavo Sousa)
- drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN1 (Gustavo Sousa)
- drm/xe: Define CACHE_MODE_1 as MCR register (Gustavo Sousa)
- drm/xe/pf: Fix CFI failure in debugfs access (Mohanram Meenakshisundaram)
- drm/xe/vf: Fix signature of print functions (Michal Wajdeczko)
- drm/xe: Make drm_driver const (Michal Wajdeczko)
- drm/xe/display: Drop xe_display_driver_set_hooks() (Michal Wajdeczko)
- drm/xe/display: Add macro with display driver features (Michal Wajdeczko)
- drm/xe/display: Add macro with display driver ops (Michal Wajdeczko)
- drm/xe/display: Prefer forward declarations (Michal Wajdeczko)
- drm/xe/display: Drop xe_display_driver_remove() stub (Michal Wajdeczko)
- drm/xe: Drop unused drm/drm_atomic_helper.h include (Michal Wajdeczko)
- drm/xe/sriov: Mark NVL as SR-IOV capable (Jakub Kolakowski)
- drm/xe/gt_idle: Use NSEC_PER_MSEC instead of float literal (Shuicheng Lin)
- drm/xe/gsc: Fix double-free of managed BO in error path (Shuicheng Lin)

----------------------------------------------------------------
Gustavo Sousa (8):
      drm/xe: Define CACHE_MODE_1 as MCR register
      drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN1
      drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN4
      drm/xe: Extract xe_hw_engine_setup_reg_lrc()
      drm/xe/kunit: Use KUNIT_EXPECT_EQ() in xe_wa_gt()
      drm/xe/mcr: Extract reg_in_steering_type_ranges()
      drm/xe/reg_sr: Do sanity check for MCR vs non-MCR
      drm/xe/guc: Use xe_device_is_l2_flush_optimized()

Jakub Kolakowski (1):
      drm/xe/sriov: Mark NVL as SR-IOV capable

Michal Wajdeczko (17):
      drm/xe: Drop unused drm/drm_atomic_helper.h include
      drm/xe/display: Drop xe_display_driver_remove() stub
      drm/xe/display: Prefer forward declarations
      drm/xe/display: Add macro with display driver ops
      drm/xe/display: Add macro with display driver features
      drm/xe/display: Drop xe_display_driver_set_hooks()
      drm/xe: Make drm_driver const
      drm/xe/vf: Fix signature of print functions
      drm/xe: Add IRQ page to HW engine definition
      drm/xe/memirq: Make page layout macros private
      drm/xe/memirq: Update GuC initialization and IRQ handler
      drm/xe/memirq: Use IRQ page from HW engine definition
      drm/xe/memirq: Reduce buffer size
      drm/xe/memirq: Update diagnostic message
      drm/xe/memirq: Dump all source pages if MSI-X
      drm/xe/memirq: Drop cached iosys_map for MEMIRQ mask
      drm/xe/memirq: Drop cached iosys_map for MEMIRQ status

Mohanram Meenakshisundaram (1):
      drm/xe/pf: Fix CFI failure in debugfs access

Niranjana Vishwanathapura (1):
      drm/xe/multi_queue: Fix secondary queue error case

Shuicheng Lin (3):
      drm/xe/gsc: Fix double-free of managed BO in error path
      drm/xe/gt_idle: Use NSEC_PER_MSEC instead of float literal
      drm/xe/oa: Fix exec_queue leak on width check in stream open

 drivers/gpu/drm/xe/display/xe_display.c     |  33 +++-----
 drivers/gpu/drm/xe/display/xe_display.h     |  21 ++++-
 drivers/gpu/drm/xe/regs/xe_gt_regs.h        |   4 +-
 drivers/gpu/drm/xe/tests/xe_rtp_test.c      |  71 +++++++++++++++--
 drivers/gpu/drm/xe/tests/xe_wa_test.c       |  14 +++-
 drivers/gpu/drm/xe/xe_device.c              |  13 +--
 drivers/gpu/drm/xe/xe_gsc.c                 |   5 +-
 drivers/gpu/drm/xe/xe_gt.c                  |   8 +-
 drivers/gpu/drm/xe/xe_gt_idle.c             |   4 +-
 drivers/gpu/drm/xe/xe_gt_mcr.c              |  65 ++++++++++-----
 drivers/gpu/drm/xe/xe_gt_mcr.h              |   1 +
 drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.c |   6 +-
 drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.h |   2 +-
 drivers/gpu/drm/xe/xe_gt_sriov_vf.c         |  24 ++++--
 drivers/gpu/drm/xe/xe_gt_sriov_vf.h         |   6 +-
 drivers/gpu/drm/xe/xe_guc.c                 |   2 +-
 drivers/gpu/drm/xe/xe_guc_submit.c          |  16 ++--
 drivers/gpu/drm/xe/xe_hw_engine.c           |  26 ++++--
 drivers/gpu/drm/xe/xe_hw_engine.h           |   2 +-
 drivers/gpu/drm/xe/xe_hw_engine_types.h     |   2 +
 drivers/gpu/drm/xe/xe_memirq.c              | 118 +++++++++++++++++-----------
 drivers/gpu/drm/xe/xe_memirq_types.h        |  13 +--
 drivers/gpu/drm/xe/xe_oa.c                  |   6 +-
 drivers/gpu/drm/xe/xe_pci.c                 |   2 +
 drivers/gpu/drm/xe/xe_reg_sr.c              |  36 +++++++++
 drivers/gpu/drm/xe/xe_tuning.c              |   2 +-
 drivers/gpu/drm/xe/xe_wa.c                  |   6 +-
 27 files changed, 348 insertions(+), 160 deletions(-)

             reply	other threads:[~2026-05-21 18:38 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-21 18:38 Thomas Hellstrom [this message]
  -- strict thread matches above, loose matches on Subject: below --
2026-05-28 12:57 [PULL] drm-xe-next Thomas Hellstrom
2026-05-14 13:20 Thomas Hellstrom
2026-04-30 13:00 Thomas Hellstrom
2026-03-27  3:24 Matthew Brost
2026-03-26  4:44 Matthew Brost
2026-03-12 14:57 Matthew Brost
2026-03-02 22:40 Matthew Brost
2026-01-15 16:16 Rodrigo Vivi
2025-12-30  9:58 Thomas Hellstrom
2025-12-19 22:41 Rodrigo Vivi
2025-11-14 10:49 Thomas Hellstrom
2025-11-17 20:56 ` Dave Airlie
2025-11-18  8:34   ` Thomas Hellström
2025-11-05 16:53 Thomas Hellstrom
2025-10-28 11:16 Thomas Hellstrom
2025-10-31 17:46 ` Simona Vetter
2025-10-20  8:31 Thomas Hellstrom
2025-10-24 11:26 ` Simona Vetter
2025-09-19 14:53 Lucas De Marchi
2025-08-29 22:00 Lucas De Marchi
2025-07-15 18:21 Rodrigo Vivi
2025-07-10 22:16 Rodrigo Vivi
2025-07-11  9:12 ` Simona Vetter
2025-07-11  9:25 ` Simona Vetter
2025-06-18 20:05 Rodrigo Vivi
2025-05-08 16:01 Thomas Hellstrom
2025-04-28 16:03 Thomas Hellstrom
2025-04-28 14:27 Thomas Hellstrom
2025-04-28 15:40 ` Thomas Hellström
2025-04-17 10:22 Thomas Hellstrom
2025-03-07  8:02 Lucas De Marchi
2025-03-07 14:51 ` Lucas De Marchi
2025-03-07 19:04   ` Lucas De Marchi
2025-02-24 18:50 Lucas De Marchi
2025-01-10 14:54 Rodrigo Vivi
2025-01-07 19:01 Rodrigo Vivi
2024-12-11 23:27 Rodrigo Vivi
2024-10-31 11:50 Thomas Hellstrom
2024-10-24 17:52 Thomas Hellstrom
2024-10-24 19:22 ` Matthew Brost
2024-10-25  7:30   ` Thomas Hellström
2024-10-25  9:34     ` Jani Nikula
2024-10-25 10:45       ` Thomas Hellström
2024-10-25 22:26         ` Matthew Brost
2024-10-17  9:32 Thomas Hellstrom
2024-10-10  9:56 Thomas Hellstrom
2024-09-06  2:29 Lucas De Marchi
2024-08-28 19:18 Lucas De Marchi
2024-08-22 20:55 Lucas De Marchi
2024-08-27 10:51 ` Daniel Vetter
2024-07-30 22:39 Lucas De Marchi
2024-07-02 19:02 Rodrigo Vivi
2024-07-05  8:18 ` Daniel Vetter
2024-06-26 22:32 Rodrigo Vivi
2024-06-06 21:43 Rodrigo Vivi
2024-04-23 12:54 Thomas Hellstrom
2024-02-26  3:21 Lucas De Marchi
2024-02-26  9:58 ` Daniel Vetter
2024-02-26 10:46 ` Daniel Stone
2024-02-26 14:16   ` Lucas De Marchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ag9RLujZiYYnSc_F@fedora \
    --to=thomas.hellstrom@linux.intel.com \
    --cc=airlied@gmail.com \
    --cc=dim-tools@lists.freedesktop.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=joonas.lahtinen@linux.intel.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=matthew.brost@intel.com \
    --cc=mripard@kernel.org \
    --cc=ogabbay@kernel.org \
    --cc=rodrigo.vivi@intel.com \
    --cc=simona.vetter@ffwll.ch \
    --cc=tursulin@ursulin.net \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox