From: "Shankar, Uma" <uma.shankar@intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
"intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>
Subject: Re: [Intel-gfx] [PATCH 2/3] drm/i915: Nuke lspcon_ycbcr420_config()
Date: Thu, 15 Oct 2020 23:28:31 +0000 [thread overview]
Message-ID: <c6d660164f694c5f96200ef6fc9f919f@intel.com> (raw)
In-Reply-To: <20200924184156.24491-2-ville.syrjala@linux.intel.com>
> -----Original Message-----
> From: Intel-gfx <intel-gfx-bounces@lists.freedesktop.org> On Behalf Of Ville
> Syrjala
> Sent: Friday, September 25, 2020 12:12 AM
> To: intel-gfx@lists.freedesktop.org
> Subject: [Intel-gfx] [PATCH 2/3] drm/i915: Nuke lspcon_ycbcr420_config()
>
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Remove the lspcon special case from intel_dp_compute_config() and just treat it
> like any other DFP than can do 4:4:4->4:2:0 conversion.
>
> The only difference between the two codepaths was that the lspcon code tried
> to already halve port_clock. That was just total nonsense as we hadn't even
> computed the base port_clock at that time.
> All that stuff happens intel_dp_compute_link_config*() and it already takes care
> of the 4:2:0 clock reduction.
Yeah, it's good to drop the special handling for Lspcon for this case.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 8 +++-----
> drivers/gpu/drm/i915/display/intel_lspcon.c | 14 --------------
> drivers/gpu/drm/i915/display/intel_lspcon.h | 2 --
> 3 files changed, 3 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 54a4b81ea3ff..f58df4994d92 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2713,7 +2713,6 @@ intel_dp_compute_config(struct intel_encoder
> *encoder,
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct drm_display_mode *adjusted_mode = &pipe_config-
> >hw.adjusted_mode;
> struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> - struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
> enum port port = encoder->port;
> struct intel_connector *intel_connector = intel_dp->attached_connector;
> struct intel_digital_connector_state *intel_conn_state = @@ -2727,10
> +2726,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>
> pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>
> - if (lspcon->active)
> - lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
> - else
> - ret = intel_dp_ycbcr420_config(pipe_config, conn_state);
> + ret = intel_dp_ycbcr420_config(pipe_config, conn_state);
> if (ret)
> return ret;
>
> @@ -6240,7 +6236,9 @@ intel_dp_update_420(struct intel_dp *intel_dp)
> ycbcr_420_passthrough =
> drm_dp_downstream_420_passthrough(intel_dp->dpcd,
> intel_dp->downstream_ports);
> + /* on-board LSPCON always assumed to support 4:4:4->4:2:0 conversion
> +*/
> ycbcr_444_to_420 =
> + dp_to_dig_port(intel_dp)->lspcon.active ||
> drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd,
> intel_dp-
> >downstream_ports);
>
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c
> b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index 59f13aef58b5..bbe011c5f7a5 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -184,20 +184,6 @@ static bool lspcon_wake_native_aux_ch(struct
> intel_lspcon *lspcon)
> return true;
> }
>
> -void lspcon_ycbcr420_config(struct drm_connector *connector,
> - struct intel_crtc_state *crtc_state)
> -{
> - const struct drm_display_info *info = &connector->display_info;
> - const struct drm_display_mode *adjusted_mode =
> - &crtc_state->hw.adjusted_mode;
> -
> - if (drm_mode_is_420_only(info, adjusted_mode) &&
> - connector->ycbcr_420_allowed) {
> - crtc_state->port_clock /= 2;
> - crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
> - }
> -}
> -
> static bool lspcon_probe(struct intel_lspcon *lspcon) {
> int retry;
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h
> b/drivers/gpu/drm/i915/display/intel_lspcon.h
> index 1cffe8a42a08..31eebab9ed57 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.h
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
> @@ -32,7 +32,5 @@ void lspcon_set_infoframes(struct intel_encoder *encoder,
> const struct drm_connector_state *conn_state);
> u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
> const struct intel_crtc_state *pipe_config); -void
> lspcon_ycbcr420_config(struct drm_connector *connector,
> - struct intel_crtc_state *crtc_state);
>
> #endif /* __INTEL_LSPCON_H__ */
> --
> 2.26.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-10-15 23:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-24 18:41 [Intel-gfx] [PATCH 1/3] drm/i915: Nuke lspcon_downsampling Ville Syrjala
2020-09-24 18:41 ` [Intel-gfx] [PATCH 2/3] drm/i915: Nuke lspcon_ycbcr420_config() Ville Syrjala
2020-10-15 23:28 ` Shankar, Uma [this message]
2020-09-24 18:41 ` [Intel-gfx] [PATCH 3/3] drm/i915: Inline intel_dp_ycbcr420_config() Ville Syrjala
2020-10-15 23:35 ` Shankar, Uma
2020-09-24 19:07 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for series starting with [1/3] drm/i915: Nuke lspcon_downsampling Patchwork
2020-09-24 19:32 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-09-24 22:14 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-10-15 23:21 ` [Intel-gfx] [PATCH 1/3] " Shankar, Uma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c6d660164f694c5f96200ef6fc9f919f@intel.com \
--to=uma.shankar@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox