From: "Ceraolo Spurio, Daniele" <daniele.ceraolospurio@intel.com>
To: <intel-gfx@lists.freedesktop.org>
Cc: alexander.usyskin@intel.com
Subject: Re: [Intel-gfx] [PATCH v2 2/7] mei: add support for graphics system controller (gsc) devices
Date: Mon, 18 Apr 2022 18:26:35 -0700 [thread overview]
Message-ID: <c940388d-59ac-08d9-80c5-26c38e1c98c8@intel.com> (raw)
In-Reply-To: <20220419000737.420867-3-daniele.ceraolospurio@intel.com>
On 4/18/2022 5:07 PM, Daniele Ceraolo Spurio wrote:
> From: Tomas Winkler <tomas.winkler@intel.com>
>
> GSC is a graphics system controller, based on CSE, it provides
> a chassis controller for graphics discrete cards, as well as it
> supports media protection on selected devices.
>
> mei_gsc binds to a auxiliary devices exposed by Intel discrete
> driver i915.
>
> v2: fix error check in mei_gsc_probe
>
> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Note that I've purposely kept the r-b here even if there was an update
because I've reviewed the (very minor) v2 changes and the r-b stands.
Daniele
> ---
> drivers/misc/mei/Kconfig | 14 +++
> drivers/misc/mei/Makefile | 3 +
> drivers/misc/mei/gsc-me.c | 194 ++++++++++++++++++++++++++++++++++++++
> drivers/misc/mei/hw-me.c | 27 +++++-
> drivers/misc/mei/hw-me.h | 2 +
> 5 files changed, 238 insertions(+), 2 deletions(-)
> create mode 100644 drivers/misc/mei/gsc-me.c
>
> diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig
> index 0e0bcd0da8522..d21486d69df27 100644
> --- a/drivers/misc/mei/Kconfig
> +++ b/drivers/misc/mei/Kconfig
> @@ -46,6 +46,20 @@ config INTEL_MEI_TXE
> Supported SoCs:
> Intel Bay Trail
>
> +config INTEL_MEI_GSC
> + tristate "Intel MEI GSC embedded device"
> + depends on INTEL_MEI
> + depends on INTEL_MEI_ME
> + depends on X86 && PCI
> + depends on DRM_I915
> + help
> + Intel auxiliary driver for GSC devices embedded in Intel graphics devices.
> +
> + An MEI device here called GSC can be embedded in an
> + Intel graphics devices, to support a range of chassis
> + tasks such as graphics card firmware update and security
> + tasks.
> +
> source "drivers/misc/mei/hdcp/Kconfig"
> source "drivers/misc/mei/pxp/Kconfig"
>
> diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile
> index d8e5165917f20..fb740d7549008 100644
> --- a/drivers/misc/mei/Makefile
> +++ b/drivers/misc/mei/Makefile
> @@ -18,6 +18,9 @@ obj-$(CONFIG_INTEL_MEI_ME) += mei-me.o
> mei-me-objs := pci-me.o
> mei-me-objs += hw-me.o
>
> +obj-$(CONFIG_INTEL_MEI_GSC) += mei-gsc.o
> +mei-gsc-objs := gsc-me.o
> +
> obj-$(CONFIG_INTEL_MEI_TXE) += mei-txe.o
> mei-txe-objs := pci-txe.o
> mei-txe-objs += hw-txe.o
> diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c
> new file mode 100644
> index 0000000000000..166c1591ba9b5
> --- /dev/null
> +++ b/drivers/misc/mei/gsc-me.c
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright(c) 2019-2022, Intel Corporation. All rights reserved.
> + *
> + * Intel Management Engine Interface (Intel MEI) Linux driver
> + */
> +
> +#include <linux/module.h>
> +#include <linux/mei_aux.h>
> +#include <linux/device.h>
> +#include <linux/irqreturn.h>
> +#include <linux/jiffies.h>
> +#include <linux/ktime.h>
> +#include <linux/delay.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "mei_dev.h"
> +#include "hw-me.h"
> +#include "hw-me-regs.h"
> +
> +#include "mei-trace.h"
> +
> +#define MEI_GSC_RPM_TIMEOUT 500
> +
> +static int mei_gsc_read_hfs(const struct mei_device *dev, int where, u32 *val)
> +{
> + struct mei_me_hw *hw = to_me_hw(dev);
> +
> + *val = ioread32(hw->mem_addr + where + 0xC00);
> +
> + return 0;
> +}
> +
> +static int mei_gsc_probe(struct auxiliary_device *aux_dev,
> + const struct auxiliary_device_id *aux_dev_id)
> +{
> + struct mei_aux_device *adev = auxiliary_dev_to_mei_aux_dev(aux_dev);
> + struct mei_device *dev;
> + struct mei_me_hw *hw;
> + struct device *device;
> + const struct mei_cfg *cfg;
> + int ret;
> +
> + cfg = mei_me_get_cfg(aux_dev_id->driver_data);
> + if (!cfg)
> + return -ENODEV;
> +
> + device = &aux_dev->dev;
> +
> + dev = mei_me_dev_init(device, cfg);
> + if (!dev) {
> + ret = -ENOMEM;
> + goto err;
> + }
> +
> + hw = to_me_hw(dev);
> + hw->mem_addr = devm_ioremap_resource(device, &adev->bar);
> + if (IS_ERR(hw->mem_addr)) {
> + dev_err(device, "mmio not mapped\n");
> + ret = PTR_ERR(hw->mem_addr);
> + goto err;
> + }
> +
> + hw->irq = adev->irq;
> + hw->read_fws = mei_gsc_read_hfs;
> +
> + dev_set_drvdata(device, dev);
> +
> + ret = devm_request_threaded_irq(device, hw->irq,
> + mei_me_irq_quick_handler,
> + mei_me_irq_thread_handler,
> + IRQF_ONESHOT, KBUILD_MODNAME, dev);
> + if (ret) {
> + dev_err(device, "irq register failed %d\n", ret);
> + goto err;
> + }
> +
> + pm_runtime_get_noresume(device);
> + pm_runtime_set_active(device);
> + pm_runtime_enable(device);
> +
> + if (mei_start(dev)) {
> + dev_err(device, "init hw failure.\n");
> + ret = -ENODEV;
> + goto irq_err;
> + }
> +
> + pm_runtime_set_autosuspend_delay(device, MEI_GSC_RPM_TIMEOUT);
> + pm_runtime_use_autosuspend(device);
> +
> + ret = mei_register(dev, device);
> + if (ret)
> + goto register_err;
> +
> + pm_runtime_put_noidle(device);
> + return 0;
> +
> +register_err:
> + mei_stop(dev);
> +irq_err:
> + devm_free_irq(device, hw->irq, dev);
> +
> +err:
> + dev_err(device, "probe failed: %d\n", ret);
> + dev_set_drvdata(device, NULL);
> + return ret;
> +}
> +
> +static void mei_gsc_remove(struct auxiliary_device *aux_dev)
> +{
> + struct mei_device *dev;
> + struct mei_me_hw *hw;
> +
> + dev = dev_get_drvdata(&aux_dev->dev);
> + if (!dev)
> + return;
> +
> + hw = to_me_hw(dev);
> +
> + mei_stop(dev);
> +
> + mei_deregister(dev);
> +
> + pm_runtime_disable(&aux_dev->dev);
> +
> + mei_disable_interrupts(dev);
> + devm_free_irq(&aux_dev->dev, hw->irq, dev);
> +}
> +
> +static int __maybe_unused mei_gsc_pm_suspend(struct device *device)
> +{
> + struct mei_device *dev = dev_get_drvdata(device);
> +
> + if (!dev)
> + return -ENODEV;
> +
> + mei_stop(dev);
> +
> + mei_disable_interrupts(dev);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused mei_gsc_pm_resume(struct device *device)
> +{
> + struct mei_device *dev = dev_get_drvdata(device);
> + int err;
> +
> + if (!dev)
> + return -ENODEV;
> +
> + err = mei_restart(dev);
> + if (err)
> + return err;
> +
> + /* Start timer if stopped in suspend */
> + schedule_delayed_work(&dev->timer_work, HZ);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(mei_gsc_pm_ops, mei_gsc_pm_suspend, mei_gsc_pm_resume);
> +
> +static const struct auxiliary_device_id mei_gsc_id_table[] = {
> + {
> + .name = "i915.mei-gsc",
> + .driver_data = MEI_ME_GSC_CFG,
> +
> + },
> + {
> + .name = "i915.mei-gscfi",
> + .driver_data = MEI_ME_GSCFI_CFG,
> + },
> + {
> + /* sentinel */
> + }
> +};
> +MODULE_DEVICE_TABLE(auxiliary, mei_gsc_id_table);
> +
> +static struct auxiliary_driver mei_gsc_driver = {
> + .probe = mei_gsc_probe,
> + .remove = mei_gsc_remove,
> + .driver = {
> + /* auxiliary_driver_register() sets .name to be the modname */
> + .pm = &mei_gsc_pm_ops,
> + },
> + .id_table = mei_gsc_id_table
> +};
> +module_auxiliary_driver(mei_gsc_driver);
> +
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_ALIAS("auxiliary:i915.mei-gsc");
> +MODULE_ALIAS("auxiliary:i915.mei-gscfi");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
> index 719fee9af1564..03945d3b34da3 100644
> --- a/drivers/misc/mei/hw-me.c
> +++ b/drivers/misc/mei/hw-me.c
> @@ -1226,6 +1226,7 @@ irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
> me_intr_disable(dev, hcsr);
> return IRQ_WAKE_THREAD;
> }
> +EXPORT_SYMBOL_GPL(mei_me_irq_quick_handler);
>
> /**
> * mei_me_irq_thread_handler - function called after ISR to handle the interrupt
> @@ -1326,6 +1327,7 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
> mutex_unlock(&dev->device_lock);
> return IRQ_HANDLED;
> }
> +EXPORT_SYMBOL_GPL(mei_me_irq_thread_handler);
>
> static const struct mei_hw_ops mei_me_hw_ops = {
>
> @@ -1440,6 +1442,12 @@ static bool mei_me_fw_type_sps_ign(const struct pci_dev *pdev)
> #define MEI_CFG_KIND_ITOUCH \
> .kind = "itouch"
>
> +#define MEI_CFG_TYPE_GSC \
> + .kind = "gsc"
> +
> +#define MEI_CFG_TYPE_GSCFI \
> + .kind = "gscfi"
> +
> #define MEI_CFG_FW_SPS_IGN \
> .quirk_probe = mei_me_fw_type_sps_ign
>
> @@ -1572,6 +1580,18 @@ static const struct mei_cfg mei_me_pch15_sps_cfg = {
> MEI_CFG_FW_SPS_IGN,
> };
>
> +/* Graphics System Controller */
> +static const struct mei_cfg mei_me_gsc_cfg = {
> + MEI_CFG_TYPE_GSC,
> + MEI_CFG_PCH8_HFS,
> +};
> +
> +/* Graphics System Controller Firmware Interface */
> +static const struct mei_cfg mei_me_gscfi_cfg = {
> + MEI_CFG_TYPE_GSCFI,
> + MEI_CFG_PCH8_HFS,
> +};
> +
> /*
> * mei_cfg_list - A list of platform platform specific configurations.
> * Note: has to be synchronized with enum mei_cfg_idx.
> @@ -1592,6 +1612,8 @@ static const struct mei_cfg *const mei_cfg_list[] = {
> [MEI_ME_PCH12_SPS_ITOUCH_CFG] = &mei_me_pch12_itouch_sps_cfg,
> [MEI_ME_PCH15_CFG] = &mei_me_pch15_cfg,
> [MEI_ME_PCH15_SPS_CFG] = &mei_me_pch15_sps_cfg,
> + [MEI_ME_GSC_CFG] = &mei_me_gsc_cfg,
> + [MEI_ME_GSCFI_CFG] = &mei_me_gscfi_cfg,
> };
>
> const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx)
> @@ -1602,7 +1624,8 @@ const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx)
> return NULL;
>
> return mei_cfg_list[idx];
> -};
> +}
> +EXPORT_SYMBOL_GPL(mei_me_get_cfg);
>
> /**
> * mei_me_dev_init - allocates and initializes the mei device structure
> @@ -1637,4 +1660,4 @@ struct mei_device *mei_me_dev_init(struct device *parent,
>
> return dev;
> }
> -
> +EXPORT_SYMBOL_GPL(mei_me_dev_init);
> diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h
> index 00a7132ac7a2e..a071c645e9054 100644
> --- a/drivers/misc/mei/hw-me.h
> +++ b/drivers/misc/mei/hw-me.h
> @@ -112,6 +112,8 @@ enum mei_cfg_idx {
> MEI_ME_PCH12_SPS_ITOUCH_CFG,
> MEI_ME_PCH15_CFG,
> MEI_ME_PCH15_SPS_CFG,
> + MEI_ME_GSC_CFG,
> + MEI_ME_GSCFI_CFG,
> MEI_ME_NUM_CFG,
> };
>
next prev parent reply other threads:[~2022-04-19 1:26 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-19 0:07 [Intel-gfx] [PATCH v2 0/7] GSC support Daniele Ceraolo Spurio
2022-04-19 0:07 ` [Intel-gfx] [PATCH v2 1/7] drm/i915/gsc: add gsc as a mei auxiliary device Daniele Ceraolo Spurio
2022-04-19 0:07 ` [Intel-gfx] [PATCH v2 2/7] mei: add support for graphics system controller (gsc) devices Daniele Ceraolo Spurio
2022-04-19 1:26 ` Ceraolo Spurio, Daniele [this message]
2022-04-19 0:07 ` [Intel-gfx] [PATCH v2 3/7] mei: gsc: setup char driver alive in spite of firmware handshake failure Daniele Ceraolo Spurio
2022-04-19 0:07 ` [Intel-gfx] [PATCH v2 4/7] mei: gsc: add runtime pm handlers Daniele Ceraolo Spurio
2022-04-19 0:07 ` [Intel-gfx] [PATCH v2 5/7] mei: gsc: retrieve the firmware version Daniele Ceraolo Spurio
2022-04-19 0:07 ` [Intel-gfx] [PATCH v2 6/7] drm/i915/dg2: add gsc with special gsc bar offsets Daniele Ceraolo Spurio
2022-04-19 17:28 ` John Harrison
2022-04-19 0:07 ` [Intel-gfx] [PATCH v2 7/7] HAX: drm/i915: force INTEL_MEI_GSC on for CI Daniele Ceraolo Spurio
2022-04-19 0:39 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for GSC support (rev6) Patchwork
2022-04-19 0:39 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-04-19 1:02 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2022-04-19 2:17 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c940388d-59ac-08d9-80c5-26c38e1c98c8@intel.com \
--to=daniele.ceraolospurio@intel.com \
--cc=alexander.usyskin@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox