From: Lyude Paul <lyude@redhat.com>
To: Jani Nikula <jani.nikula@intel.com>, intel-gfx@lists.freedesktop.org
Cc: stable@vger.kernel.org
Subject: Re: [Intel-gfx] [PATCH] drm/i915/backlight: fix CPU mode backlight takeover on LPT
Date: Fri, 08 Jan 2021 14:01:51 -0500 [thread overview]
Message-ID: <e5fd2290fae25fc1167ea6fe91e7060840d0db47.camel@redhat.com> (raw)
In-Reply-To: <20210108152841.6944-1-jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Let me know when you've pushed this upstream and I'll go ahead and send out a
rebased version of my backlight series.
On Fri, 2021-01-08 at 17:28 +0200, Jani Nikula wrote:
> The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
> functions operate directly on the hardware registers. If inverting the
> value is needed, using intel_panel_compute_brightness(), it should only
> be done in the interface between hardware registers and
> panel->backlight.level.
>
> The CPU mode takeover code added in commit 5b1ec9ac7ab5
> ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
> hardware register and converts to panel->backlight.level correctly,
> however the value written back should remain in the hardware register
> "domain".
>
> This hasn't been an issue, because GM45 machines are the only known
> users of i915.invert_brightness and the brightness invert quirk, and
> without one of them no conversion is made. It's likely nobody's ever hit
> the problem.
>
> Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Lyude Paul <lyude@redhat.com>
> Cc: <stable@vger.kernel.org> # v5.1+
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_panel.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_panel.c
> b/drivers/gpu/drm/i915/display/intel_panel.c
> index 67f81ae995c4..7a4239d1c241 100644
> --- a/drivers/gpu/drm/i915/display/intel_panel.c
> +++ b/drivers/gpu/drm/i915/display/intel_panel.c
> @@ -1649,16 +1649,13 @@ static int lpt_setup_backlight(struct intel_connector
> *connector, enum pipe unus
> val = pch_get_backlight(connector);
> else
> val = lpt_get_backlight(connector);
> - val = intel_panel_compute_brightness(connector, val);
> - panel->backlight.level = clamp(val, panel->backlight.min,
> - panel->backlight.max);
>
> if (cpu_mode) {
> drm_dbg_kms(&dev_priv->drm,
> "CPU backlight register was enabled, switching to
> PCH override\n");
>
> /* Write converted CPU PWM value to PCH override register */
> - lpt_set_backlight(connector->base.state, panel-
> >backlight.level);
> + lpt_set_backlight(connector->base.state, val);
> intel_de_write(dev_priv, BLC_PWM_PCH_CTL1,
> pch_ctl1 | BLM_PCH_OVERRIDE_ENABLE);
>
> @@ -1666,6 +1663,10 @@ static int lpt_setup_backlight(struct intel_connector
> *connector, enum pipe unus
> cpu_ctl2 & ~BLM_PWM_ENABLE);
> }
>
> + val = intel_panel_compute_brightness(connector, val);
> + panel->backlight.level = clamp(val, panel->backlight.min,
> + panel->backlight.max);
> +
> return 0;
> }
>
--
Sincerely,
Lyude Paul (she/her)
Software Engineer at Red Hat
Note: I deal with a lot of emails and have a lot of bugs on my plate. If you've
asked me a question, are waiting for a review/merge on a patch, etc. and I
haven't responded in a while, please feel free to send me another email to check
on my status. I don't bite!
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-01-08 19:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-08 15:28 [Intel-gfx] [PATCH] drm/i915/backlight: fix CPU mode backlight takeover on LPT Jani Nikula
2021-01-08 19:01 ` Lyude Paul [this message]
2021-01-11 10:03 ` Jani Nikula
2021-01-11 19:10 ` Jani Nikula
2021-01-08 19:18 ` [Intel-gfx] ✓ Fi.CI.BAT: success for " Patchwork
2021-01-09 0:08 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e5fd2290fae25fc1167ea6fe91e7060840d0db47.camel@redhat.com \
--to=lyude@redhat.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox