From: sashiko-bot@kernel.org
To: "Kory Maincent" <kory.maincent@bootlin.com>
Cc: dri-devel@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH RFC v3 8/8] drm/mediatek: Use dp_connector helpers to expose link training state
Date: Mon, 12 Oct 2026 15:26:49 +0000 [thread overview]
Message-ID: <sashiko-outbox-168333@kernel.org> (raw)
In-Reply-To: <20261012-feat_link_cap-v3-8-7517f4aba0f3@bootlin.com>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] drm: connection_mutex not held during atomic_enable/disable DP sink helpers
- [Medium] drm: missed DP link parameter reporting on initial hotplug
--
commit db3d1199eb9fddde4ac0ef014ef0885a214a3723
Author: Kory Maincent <kory.maincent@bootlin.com>
drm/mediatek: Use dp_connector helpers to expose link training state
Adopt the DRM core DisplayPort helpers by setting DRM_BRIDGE_OP_DP and
populating the bridge dp_link_caps at probe time. Report the sink
capabilities on hotplug, reset them on disconnect, and report the link
parameters once link training succeeds.
> diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
> index f656b85b84212..2e2596eaa342e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dp.c
[ ... ]
> @@ -1812,6 +1812,35 @@ static void mtk_dp_train_change_mode(struct mtk_dp *mtk_dp)
> mtk_dp_reset_swing_pre_emphasis(mtk_dp);
> }
>
> +static void _mtk_dp_report_link_train(struct mtk_dp *mtk_dp)
> +{
> + u32 rate, nlanes;
> + bool dsc = false;
> +
> + rate = drm_dp_bw_code_to_link_rate(mtk_dp->train_info.link_rate);
> + nlanes = mtk_dp->train_info.lane_count;
> +
> + drm_dp_set_cur_link_params(mtk_dp->conn, rate, nlanes, dsc);
> +}
> +
> +static void mtk_dp_report_link_train(struct mtk_dp *mtk_dp)
> +{
> + struct drm_modeset_lock *lock;
> + int ret;
> +
> + if (!mtk_dp->conn)
> + return;
[Severity: Medium]
Will this silently discard the link training parameters on the initial
hotplug?
Because the initial HPD interrupt fires before any atomic modeset has
occurred, mtk_dp->conn is only initialized later in
mtk_dp_bridge_atomic_enable(). At this point, it will be NULL, causing
mtk_dp_report_link_train() to return immediately.
Furthermore, while mtk_dp_bridge_atomic_enable() does report link training,
it restricts it to eDP. Will standard DP connections ever report their
current link parameters to the DRM core for the initial connection?
[ ... ]
> @@ -2390,12 +2433,20 @@ static void mtk_dp_bridge_atomic_enable(struct drm_bridge *bridge,
> if (mtk_dp->data->bridge_type == DRM_MODE_CONNECTOR_eDP) {
> mtk_dp_aux_panel_poweron(mtk_dp, true);
>
> + ret = drm_dp_sink_sync_caps(mtk_dp->conn, &mtk_dp->aux, NULL);
[Severity: High]
Does this code call drm_dp_sink_sync_caps() while the modeset locks are
dropped?
During a non-blocking atomic commit, the atomic_enable and atomic_disable
callbacks are executed in a worker thread asynchronously, and all modeset
locks (including connection_mutex) are intentionally dropped by the
submitter thread beforehand.
Since drm_dp_sink_sync_caps() explicitly enforces that the connector's
connection_mutex is held by asserting
drm_modeset_lock_assert_held(&connector->dev->mode_config.connection_mutex),
will this trigger a lockdep splat?
> + if (ret)
> + drm_dbg_kms(mtk_dp->aux.drm_dev,
> + "%s: error sink caps synchronisation (%d)\n",
> + mtk_dp->aux.name, ret);
> +
> /* Training */
> ret = mtk_dp_training(mtk_dp);
> if (ret) {
> drm_err(mtk_dp->drm_dev, "Training failed, %d\n", ret);
> goto power_off_aux;
> }
> +
> + _mtk_dp_report_link_train(mtk_dp);
[Severity: High]
Does calling _mtk_dp_report_link_train() here bypass the locking that is
normally handled by the mtk_dp_report_link_train() wrapper?
_mtk_dp_report_link_train() eventually calls drm_dp_set_cur_link_params(),
which also asserts that connection_mutex is held. Since the lock is dropped
in atomic_enable, is it safe to expose the connector's properties to
concurrent data races without the lock?
> }
>
> ret = mtk_dp_video_config(mtk_dp);
[ ... ]
> @@ -2435,6 +2486,7 @@ static void mtk_dp_bridge_atomic_disable(struct drm_bridge *bridge,
> if (mtk_dp->data->bridge_type == DRM_MODE_CONNECTOR_eDP) {
> mtk_dp->enabled = false;
> mtk_dp_aux_panel_poweron(mtk_dp, false);
> + drm_dp_sink_reset_caps(mtk_dp->conn);
[Severity: High]
Similar to the issue above, does this call drm_dp_sink_reset_caps() in an
unlocked context?
This function also asserts that connection_mutex is held, which would lead
to a lockdep splat during an asynchronous atomic commit.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261012-feat_link_cap-v3-0-7517f4aba0f3@bootlin.com?part=8
next prev parent reply other threads:[~2026-10-12 15:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-12 15:10 [PATCH RFC v3 0/8] Add support for DisplayPort link training information report Kory Maincent
2026-10-12 15:10 ` [PATCH RFC v3 1/8] drm: Move sink link rates reading helpers out of i915 Kory Maincent
2026-10-12 15:26 ` sashiko-bot
2026-10-12 15:10 ` [PATCH RFC v3 2/8] drm: Move DSC capability reading helper " Kory Maincent
2026-10-12 15:10 ` [PATCH RFC v3 3/8] drm: Introduce DisplayPort link training capabilities and state helpers Kory Maincent
2026-10-12 15:23 ` sashiko-bot
2026-10-12 15:10 ` [PATCH RFC v3 4/8] drm/i915/display/dp: Read DPCD DSC capabilities in any case Kory Maincent
2026-10-12 15:11 ` [PATCH RFC v3 5/8] drm/i915/display/dp: Use dp_connector helpers to expose link training state Kory Maincent
2026-10-12 15:24 ` sashiko-bot
2026-10-12 15:11 ` [PATCH RFC v3 6/8] drm/bridge: Expose link training state via new DRM_BRIDGE_OP_DP flag Kory Maincent
2026-10-12 15:20 ` sashiko-bot
2026-10-12 15:11 ` [PATCH RFC v3 7/8] drm/analogix/anx7625: Use dp_connector helpers to expose link training state Kory Maincent
2026-10-12 15:26 ` sashiko-bot
2026-10-12 15:11 ` [PATCH RFC v3 8/8] drm/mediatek: " Kory Maincent
2026-10-12 15:26 ` sashiko-bot [this message]
2026-10-13 18:12 ` ✗ Fi.CI.BUILD: failure for Add support for DisplayPort link training information report Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-168333@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=kory.maincent@bootlin.com \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox