From: Jacob Keller <jacob.e.keller@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH v4 1/5] igb: introduce ptp_flags variable and use it to replace IGB_FLAG_PTP
Date: Tue, 24 May 2016 13:56:27 -0700 [thread overview]
Message-ID: <20160524205631.21225-1-jacob.e.keller@intel.com> (raw)
Upcoming patches will introduce new PTP specific flags. To avoid
cluttering the normal flags variable, introduce PTP specific "ptp_flags"
variable for this purpose, and move IGB_FLAG_PTP to become
IGB_PTP_ENABLED.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
drivers/net/ethernet/intel/igb/igb.h | 5 ++++-
drivers/net/ethernet/intel/igb/igb_ptp.c | 7 ++++---
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index b9609afa5ca3..1e18a9eb16e0 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -445,6 +445,7 @@ struct igb_adapter {
unsigned long ptp_tx_start;
unsigned long last_rx_ptp_check;
unsigned long last_rx_timestamp;
+ unsigned int ptp_flags;
spinlock_t tmreg_lock;
struct cyclecounter cc;
struct timecounter tc;
@@ -474,12 +475,14 @@ struct igb_adapter {
u16 eee_advert;
};
+/* flags controlling PTP/1588 function */
+#define IGB_PTP_ENABLED BIT(0)
+
#define IGB_FLAG_HAS_MSI BIT(0)
#define IGB_FLAG_DCA_ENABLED BIT(1)
#define IGB_FLAG_QUAD_PORT_A BIT(2)
#define IGB_FLAG_QUEUE_PAIRS BIT(3)
#define IGB_FLAG_DMAC BIT(4)
-#define IGB_FLAG_PTP BIT(5)
#define IGB_FLAG_RSS_FIELD_IPV4_UDP BIT(6)
#define IGB_FLAG_RSS_FIELD_IPV6_UDP BIT(7)
#define IGB_FLAG_WOL_SUPPORTED BIT(8)
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index f097c5a8ab93..504102ba4bfb 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -684,6 +684,7 @@ void igb_ptp_rx_hang(struct igb_adapter *adapter)
u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL);
unsigned long rx_event;
+ /* Other hardware uses per-packet timestamps */
if (hw->mac.type != e1000_82576)
return;
@@ -1156,7 +1157,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
} else {
dev_info(&adapter->pdev->dev, "added PHC on %s\n",
adapter->netdev->name);
- adapter->flags |= IGB_FLAG_PTP;
+ adapter->ptp_flags |= IGB_PTP_ENABLED;
}
}
@@ -1194,7 +1195,7 @@ void igb_ptp_stop(struct igb_adapter *adapter)
ptp_clock_unregister(adapter->ptp_clock);
dev_info(&adapter->pdev->dev, "removed PHC on %s\n",
adapter->netdev->name);
- adapter->flags &= ~IGB_FLAG_PTP;
+ adapter->ptp_flags &= ~IGB_PTP_ENABLED;
}
}
@@ -1209,7 +1210,7 @@ void igb_ptp_reset(struct igb_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
unsigned long flags;
- if (!(adapter->flags & IGB_FLAG_PTP))
+ if (!(adapter->ptp_flags & IGB_PTP_ENABLED))
return;
/* reset the tstamp_config */
--
2.8.2.820.gd1c5f70
next reply other threads:[~2016-05-24 20:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 20:56 Jacob Keller [this message]
2016-05-24 20:56 ` [Intel-wired-lan] [PATCH v4 2/5] igb: introduce IGB_PTP_OVERFLOW_CHECK flag Jacob Keller
2016-05-27 22:24 ` Brown, Aaron F
2016-05-24 20:56 ` [Intel-wired-lan] [PATCH v4 3/5] igb: re-use igb_ptp_reset in igb_ptp_init Jacob Keller
2016-05-27 22:24 ` Brown, Aaron F
2016-05-24 20:56 ` [Intel-wired-lan] [PATCH v4 4/5] igb: implement igb_ptp_suspend Jacob Keller
2016-05-27 22:24 ` Brown, Aaron F
2016-05-24 20:56 ` [Intel-wired-lan] [PATCH v4 5/5] igb: call igb_ptp_suspend during suspend/resume cycle Jacob Keller
2016-05-27 22:25 ` Brown, Aaron F
2016-05-24 20:57 ` [Intel-wired-lan] [PATCH v4 1/5] igb: introduce ptp_flags variable and use it to replace IGB_FLAG_PTP Keller, Jacob E
2016-05-24 23:37 ` Brown, Aaron F
2016-05-25 20:08 ` Keller, Jacob E
2016-05-27 22:23 ` Brown, Aaron F
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160524205631.21225-1-jacob.e.keller@intel.com \
--to=jacob.e.keller@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox