From: Jacob Keller <jacob.e.keller@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH v4 3/5] igb: re-use igb_ptp_reset in igb_ptp_init
Date: Tue, 24 May 2016 13:56:29 -0700 [thread overview]
Message-ID: <20160524205631.21225-3-jacob.e.keller@intel.com> (raw)
In-Reply-To: <20160524205631.21225-1-jacob.e.keller@intel.com>
Modify igb_ptp_init to take advantage of igb_ptp_reset, and remove
duplicated work that was occurring in both igb_ptp_reset and
igb_ptp_init.
In total, resetting the TSAUXC register, and resetting the system time
both happen in igb_ptp_reset already. igb_ptp_reset now also takes care
of starting the delayed work item for overflow checks, as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
drivers/net/ethernet/intel/igb/igb_main.c | 3 +-
drivers/net/ethernet/intel/igb/igb_ptp.c | 48 +++++++++++--------------------
2 files changed, 18 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 21727692bef6..0321f0884fa0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2027,7 +2027,8 @@ void igb_reset(struct igb_adapter *adapter)
wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
/* Re-enable PTP, where applicable. */
- igb_ptp_reset(adapter);
+ if (adapter->ptp_flags & IGB_PTP_ENABLED)
+ igb_ptp_reset(adapter);
igb_get_phy_info(hw);
}
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 88d367d5a78d..907c225d9b20 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -1043,6 +1043,13 @@ int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
-EFAULT : 0;
}
+/**
+ * igb_ptp_init - Initialize PTP functionality
+ * @adapter: Board private structure
+ *
+ * This function is called at device probe to initialize the PTP
+ * functionality.
+ */
void igb_ptp_init(struct igb_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@@ -1065,8 +1072,6 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->cc.mask = CYCLECOUNTER_MASK(64);
adapter->cc.mult = 1;
adapter->cc.shift = IGB_82576_TSYNC_SHIFT;
- /* Dial the nominal frequency. */
- wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576);
adapter->ptp_flags |= IGB_PTP_OVERFLOW_CHECK;
break;
case e1000_82580:
@@ -1086,8 +1091,6 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->cc.mask = CYCLECOUNTER_MASK(IGB_NBITS_82580);
adapter->cc.mult = 1;
adapter->cc.shift = 0;
- /* Enable the timer functions by clearing bit 31. */
- wr32(E1000_TSAUXC, 0x0);
adapter->ptp_flags |= IGB_PTP_OVERFLOW_CHECK;
break;
case e1000_i210:
@@ -1113,46 +1116,24 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->ptp_caps.settime64 = igb_ptp_settime_i210;
adapter->ptp_caps.enable = igb_ptp_feature_enable_i210;
adapter->ptp_caps.verify = igb_ptp_verify_pin;
- /* Enable the timer functions by clearing bit 31. */
- wr32(E1000_TSAUXC, 0x0);
break;
default:
adapter->ptp_clock = NULL;
return;
}
- wrfl();
-
spin_lock_init(&adapter->tmreg_lock);
INIT_WORK(&adapter->ptp_tx_work, igb_ptp_tx_work);
- /* Initialize the clock and overflow work for devices that need it. */
- if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) {
- struct timespec64 ts = ktime_to_timespec64(ktime_get_real());
-
- igb_ptp_settime_i210(&adapter->ptp_caps, &ts);
- } else {
- timecounter_init(&adapter->tc, &adapter->cc,
- ktime_to_ns(ktime_get_real()));
- }
-
- if (adapter->ptp_flags & IGB_PTP_OVERFLOW_CHECK) {
+ if (adapter->ptp_flags & IGB_PTP_OVERFLOW_CHECK)
INIT_DELAYED_WORK(&adapter->ptp_overflow_work,
igb_ptp_overflow_check);
- schedule_delayed_work(&adapter->ptp_overflow_work,
- IGB_SYSTIM_OVERFLOW_PERIOD);
- }
-
- /* Initialize the time sync interrupts for devices that support it. */
- if (hw->mac.type >= e1000_82580) {
- wr32(E1000_TSIM, TSYNC_INTERRUPTS);
- wr32(E1000_IMS, E1000_IMS_TS);
- }
-
adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
+ igb_ptp_reset(adapter);
+
adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
&adapter->pdev->dev);
if (IS_ERR(adapter->ptp_clock)) {
@@ -1205,9 +1186,6 @@ void igb_ptp_reset(struct igb_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
unsigned long flags;
- if (!(adapter->ptp_flags & IGB_PTP_ENABLED))
- return;
-
/* reset the tstamp_config */
igb_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
@@ -1244,4 +1222,10 @@ void igb_ptp_reset(struct igb_adapter *adapter)
}
out:
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+ wrfl();
+
+ if (adapter->ptp_flags & IGB_PTP_OVERFLOW_CHECK)
+ schedule_delayed_work(&adapter->ptp_overflow_work,
+ IGB_SYSTIM_OVERFLOW_PERIOD);
}
--
2.8.2.820.gd1c5f70
next prev parent reply other threads:[~2016-05-24 20:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-24 20:56 [Intel-wired-lan] [PATCH v4 1/5] igb: introduce ptp_flags variable and use it to replace IGB_FLAG_PTP Jacob Keller
2016-05-24 20:56 ` [Intel-wired-lan] [PATCH v4 2/5] igb: introduce IGB_PTP_OVERFLOW_CHECK flag Jacob Keller
2016-05-27 22:24 ` Brown, Aaron F
2016-05-24 20:56 ` Jacob Keller [this message]
2016-05-27 22:24 ` [Intel-wired-lan] [PATCH v4 3/5] igb: re-use igb_ptp_reset in igb_ptp_init Brown, Aaron F
2016-05-24 20:56 ` [Intel-wired-lan] [PATCH v4 4/5] igb: implement igb_ptp_suspend Jacob Keller
2016-05-27 22:24 ` Brown, Aaron F
2016-05-24 20:56 ` [Intel-wired-lan] [PATCH v4 5/5] igb: call igb_ptp_suspend during suspend/resume cycle Jacob Keller
2016-05-27 22:25 ` Brown, Aaron F
2016-05-24 20:57 ` [Intel-wired-lan] [PATCH v4 1/5] igb: introduce ptp_flags variable and use it to replace IGB_FLAG_PTP Keller, Jacob E
2016-05-24 23:37 ` Brown, Aaron F
2016-05-25 20:08 ` Keller, Jacob E
2016-05-27 22:23 ` Brown, Aaron F
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160524205631.21225-3-jacob.e.keller@intel.com \
--to=jacob.e.keller@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox