From: Alexander Duyck <alexander.duyck@gmail.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [RFC PATCH 12/20] ixgbe: Only DMA sync frame length
Date: Mon, 19 Dec 2016 12:11:52 -0800 [thread overview]
Message-ID: <20161219201152.27116.36483.stgit@localhost.localdomain> (raw)
In-Reply-To: <20161219200456.27116.28900.stgit@localhost.localdomain>
From: Alexander Duyck <alexander.h.duyck@intel.com>
On some platforms, syncing a buffer for DMA is expensive. Rather than
sync the whole 2K receive buffer, only synchronise the length of the
frame, which will typically be the MTU, or a much smaller TCP ACK.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index f62191f7d080..0ff32c05bfc3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1842,7 +1842,7 @@ static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring,
dma_sync_single_range_for_cpu(rx_ring->dev,
IXGBE_CB(skb)->dma,
frag->page_offset,
- ixgbe_rx_bufsz(rx_ring),
+ skb_frag_size(frag),
DMA_FROM_DEVICE);
}
IXGBE_CB(skb)->dma = 0;
@@ -1983,12 +1983,11 @@ static bool ixgbe_can_reuse_rx_page(struct ixgbe_rx_buffer *rx_buffer,
**/
static bool ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring,
struct ixgbe_rx_buffer *rx_buffer,
- union ixgbe_adv_rx_desc *rx_desc,
+ unsigned int size,
struct sk_buff *skb)
{
struct page *page = rx_buffer->page;
unsigned char *va = page_address(page) + rx_buffer->page_offset;
- unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
#if (PAGE_SIZE < 8192)
unsigned int truesize = ixgbe_rx_bufsz(rx_ring);
#else
@@ -2020,6 +2019,7 @@ static bool ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring,
static struct sk_buff *ixgbe_fetch_rx_buffer(struct ixgbe_ring *rx_ring,
union ixgbe_adv_rx_desc *rx_desc)
{
+ unsigned int size = le16_to_cpu(rx_desc->wb.upper.length);
struct ixgbe_rx_buffer *rx_buffer;
struct sk_buff *skb;
struct page *page;
@@ -2074,14 +2074,14 @@ static struct sk_buff *ixgbe_fetch_rx_buffer(struct ixgbe_ring *rx_ring,
dma_sync_single_range_for_cpu(rx_ring->dev,
rx_buffer->dma,
rx_buffer->page_offset,
- ixgbe_rx_bufsz(rx_ring),
+ size,
DMA_FROM_DEVICE);
rx_buffer->skb = NULL;
}
/* pull page into skb */
- if (ixgbe_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+ if (ixgbe_add_rx_frag(rx_ring, rx_buffer, size, skb)) {
/* hand second half of page back to the ring */
ixgbe_reuse_rx_page(rx_ring, rx_buffer);
} else if (IXGBE_CB(skb)->dma == rx_buffer->dma) {
next prev parent reply other threads:[~2016-12-19 20:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-19 20:10 [Intel-wired-lan] [RFC PATCH 00/20] Enable the use of build_skb in igb/ixgbe Alexander Duyck
2016-12-19 20:10 ` [Intel-wired-lan] [RFC PATCH 01/20] mm: Rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free Alexander Duyck
2016-12-19 20:10 ` [Intel-wired-lan] [RFC PATCH 02/20] mm: Rename __page_frag functions to __page_frag_cache, drop order from drain Alexander Duyck
2016-12-19 20:10 ` [Intel-wired-lan] [RFC PATCH 03/20] mm: Add documentation for page fragment APIs Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 04/20] igb: Add support for DMA_ATTR_WEAK_ORDERING Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 05/20] igb: Use length to determine if descriptor is done Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 06/20] igb: Limit maximum frame Rx based on MTU Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 07/20] igb: Add support for padding packet Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 08/20] igb: Add support for ethtool private flag to allow use of legacy Rx Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 09/20] igb: Break out Rx buffer page management Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 10/20] igb: Revert "igb: Revert support for build_skb in igb" Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 11/20] ixgbe: Add function for checking to see if we can reuse page Alexander Duyck
2016-12-19 20:11 ` Alexander Duyck [this message]
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 13/20] ixgbe: Update driver to make use of DMA attributes in Rx path Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 14/20] ixgbe: Update code to better handle incrementing page count Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 15/20] ixgbe: Make use of order 1 pages and 3K buffers independent of FCoE Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 16/20] ixgbe: Use length to determine if descriptor is done Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 17/20] ixgbe: Break out Rx buffer page management Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 18/20] ixgbe: Add support for padding packet Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 19/20] ixgbe: Add private flag to control buffer mode Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 20/20] ixgbe: Add support for build_skb Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161219201152.27116.36483.stgit@localhost.localdomain \
--to=alexander.duyck@gmail.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox