Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Duyck <alexander.duyck@gmail.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [RFC PATCH 18/20] ixgbe: Add support for padding packet
Date: Mon, 19 Dec 2016 12:12:28 -0800	[thread overview]
Message-ID: <20161219201228.27116.26836.stgit@localhost.localdomain> (raw)
In-Reply-To: <20161219200456.27116.28900.stgit@localhost.localdomain>

From: Alexander Duyck <alexander.h.duyck@intel.com>

This patch adds support for providing a buffer with headroom and tailroom
to allow for shared info, NET_SKB_PAD, and NET_IP_ALIGN.  With this
combined with the DMA changes we can start using build_skb to build frames
around an incoming Rx buffer instead of having to memcpy the headers.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h      |   17 ++++++++++
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |   43 +++++++++++++++++++++++--
 2 files changed, 56 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index cb1e8d4c10bb..a535b538ad9e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -94,6 +94,14 @@
 #define IXGBE_RXBUFFER_4K    4096
 #define IXGBE_MAX_RXBUFFER  16384  /* largest size for a single descriptor */
 
+#define IXGBE_SKB_PAD		(NET_SKB_PAD + NET_IP_ALIGN)
+#if (PAGE_SIZE < 8192)
+#define IXGBE_MAX_FRAME_BUILD_SKB \
+	(SKB_WITH_OVERHEAD(IXGBE_RXBUFFER_2K) - IXGBE_SKB_PAD)
+#else
+#define IGB_MAX_FRAME_BUILD_SKB IXGBE_RXBUFFER_2K
+#endif
+
 /*
  * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN means we
  * reserve 64 more, and skb_shared_info adds an additional 320 bytes more,
@@ -234,6 +242,7 @@ struct ixgbe_rx_queue_stats {
 
 enum ixgbe_ring_state_t {
 	__IXGBE_RX_3K_BUFFER,
+	__IXGBE_RX_BUILD_SKB_ENABLED,
 	__IXGBE_RX_RSC_ENABLED,
 	__IXGBE_RX_CSUM_UDP_ZERO_ERR,
 	__IXGBE_RX_FCOE,
@@ -243,6 +252,9 @@ enum ixgbe_ring_state_t {
 	__IXGBE_HANG_CHECK_ARMED,
 };
 
+#define ring_uses_build_skb(ring) \
+	test_bit(__IXGBE_RX_BUILD_SKB_ENABLED, &(ring)->state)
+
 struct ixgbe_fwd_adapter {
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
 	struct net_device *netdev;
@@ -354,6 +366,10 @@ static inline unsigned int ixgbe_rx_bufsz(struct ixgbe_ring *ring)
 {
 	if (test_bit(__IXGBE_RX_3K_BUFFER, &ring->state))
 		return IXGBE_RXBUFFER_3K;
+#if (PAGE_SIZE < 8192)
+	if (ring_uses_build_skb(ring))
+		return IXGBE_MAX_FRAME_BUILD_SKB;
+#endif
 	return IXGBE_RXBUFFER_2K;
 }
 
@@ -667,6 +683,7 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG2_PHY_INTERRUPT		BIT(11)
 #define IXGBE_FLAG2_UDP_TUN_REREG_NEEDED	BIT(12)
 #define IXGBE_FLAG2_VLAN_PROMISC		BIT(13)
+#define IXGBE_FLAG2_RX_LEGACY			BIT(14)
 
 	/* Tx fast path data */
 	int num_tx_queues;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 3f94cad1fdc8..d509b6842b9a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1549,6 +1549,11 @@ static inline void ixgbe_rx_checksum(struct ixgbe_ring *ring,
 	}
 }
 
+static inline unsigned int ixgbe_rx_offset(struct ixgbe_ring *rx_ring)
+{
+	return ring_uses_build_skb(rx_ring) ? IXGBE_SKB_PAD : 0;
+}
+
 static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring,
 				    struct ixgbe_rx_buffer *bi)
 {
@@ -1585,7 +1590,7 @@ static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring,
 
 	bi->dma = dma;
 	bi->page = page;
-	bi->page_offset = 0;
+	bi->page_offset = ixgbe_rx_offset(rx_ring);
 	bi->pagecnt_bias = 1;
 
 	return true;
@@ -1996,7 +2001,9 @@ static void ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring,
 #if (PAGE_SIZE < 8192)
 	unsigned int truesize = ixgbe_rx_pg_size(rx_ring) / 2;
 #else
-	unsigned int truesize = SKB_DATA_ALIGN(size);
+	unsigned int truesize = ring_uses_build_skb(rx_ring) ?
+				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) :
+				SKB_DATA_ALIGN(size);
 #endif
 	skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page,
 			rx_buffer->page_offset, size, truesize);
@@ -2078,7 +2085,7 @@ static struct sk_buff *ixgbe_construct_skb(struct ixgbe_ring *rx_ring,
 #if (PAGE_SIZE < 8192)
 	unsigned int truesize = ixgbe_rx_pg_size(rx_ring) / 2;
 #else
-	unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
+	unsigned int truesize = SKB_DATA_ALIGN(size);
 #endif
 	struct sk_buff *skb;
 
@@ -3421,7 +3428,10 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
 	srrctl = IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT;
 
 	/* configure the packet buffer length */
-	srrctl |= ixgbe_rx_bufsz(rx_ring) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+	if (test_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state))
+		srrctl |= IXGBE_RXBUFFER_3K >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+	else
+		srrctl |= IXGBE_RXBUFFER_2K >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
 
 	/* configure descriptor type */
 	srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
@@ -3754,6 +3764,17 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
 		 */
 		rxdctl &= ~0x3FFFFF;
 		rxdctl |=  0x080420;
+#if (PAGE_SIZE < 8192)
+	} else {
+		rxdctl &= ~(IXGBE_RXDCTL_RLPMLMASK |
+			    IXGBE_RXDCTL_RLPML_EN);
+
+		/* Limit the maximum frame size so we don't overrun the skb */
+		if (ring_uses_build_skb(ring) &&
+		    !test_bit(__IXGBE_RX_3K_BUFFER, &ring->state))
+			rxdctl |= IXGBE_MAX_FRAME_BUILD_SKB |
+				  IXGBE_RXDCTL_RLPML_EN;
+#endif
 	}
 
 	/* enable receive descriptor ring */
@@ -3895,12 +3916,26 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
 
 		clear_ring_rsc_enabled(rx_ring);
 		clear_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state);
+		clear_bit(__IXGBE_RX_BUILD_SKB_ENABLED, &rx_ring->state);
 
 		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
 			set_ring_rsc_enabled(rx_ring);
 
 		if (test_bit(__IXGBE_RX_FCOE, &rx_ring->state))
 			set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state);
+
+		if (adapter->flags2 & IXGBE_FLAG2_RX_LEGACY)
+			continue;
+
+		set_bit(__IXGBE_RX_BUILD_SKB_ENABLED, &rx_ring->state);
+
+#if (PAGE_SIZE < 8192)
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+			set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state);
+
+		if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))
+			set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state);
+#endif
 	}
 }
 


  parent reply	other threads:[~2016-12-19 20:12 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-19 20:10 [Intel-wired-lan] [RFC PATCH 00/20] Enable the use of build_skb in igb/ixgbe Alexander Duyck
2016-12-19 20:10 ` [Intel-wired-lan] [RFC PATCH 01/20] mm: Rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free Alexander Duyck
2016-12-19 20:10 ` [Intel-wired-lan] [RFC PATCH 02/20] mm: Rename __page_frag functions to __page_frag_cache, drop order from drain Alexander Duyck
2016-12-19 20:10 ` [Intel-wired-lan] [RFC PATCH 03/20] mm: Add documentation for page fragment APIs Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 04/20] igb: Add support for DMA_ATTR_WEAK_ORDERING Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 05/20] igb: Use length to determine if descriptor is done Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 06/20] igb: Limit maximum frame Rx based on MTU Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 07/20] igb: Add support for padding packet Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 08/20] igb: Add support for ethtool private flag to allow use of legacy Rx Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 09/20] igb: Break out Rx buffer page management Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 10/20] igb: Revert "igb: Revert support for build_skb in igb" Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 11/20] ixgbe: Add function for checking to see if we can reuse page Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 12/20] ixgbe: Only DMA sync frame length Alexander Duyck
2016-12-19 20:11 ` [Intel-wired-lan] [RFC PATCH 13/20] ixgbe: Update driver to make use of DMA attributes in Rx path Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 14/20] ixgbe: Update code to better handle incrementing page count Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 15/20] ixgbe: Make use of order 1 pages and 3K buffers independent of FCoE Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 16/20] ixgbe: Use length to determine if descriptor is done Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 17/20] ixgbe: Break out Rx buffer page management Alexander Duyck
2016-12-19 20:12 ` Alexander Duyck [this message]
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 19/20] ixgbe: Add private flag to control buffer mode Alexander Duyck
2016-12-19 20:12 ` [Intel-wired-lan] [RFC PATCH 20/20] ixgbe: Add support for build_skb Alexander Duyck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161219201228.27116.26836.stgit@localhost.localdomain \
    --to=alexander.duyck@gmail.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox