[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Pavel Machek]

Hi!

Perhaps you should get regressions at kernel.org alias, or something like that?

> As always: Are you aware of any other regressions? Then please let me
> know. For details see http://bit.ly/lnxregtrackid And please tell me if
> there is anything in the report that shouldn't be there.

I am using wake-on-lan quite a bit, and it stopped working. I'll move
to -rc4 and test there; but if anyone already has some ideas, let me
know.

Hardware is thinkpad X220

00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network
Connection (rev 04)

> Ciao, Thorsten
> 
> P.S.: Thx to all those that CCed me on regression reports or provided
> other input, it makes compiling these reports a whole lot easier!
> 
> == Current regressions ==
> 
> [x86/mm/gup] e585513b76: will-it-scale.per_thread_ops -6.9% regression
> (2017-07-10)
> http://lkml.kernel.org/r/20170710024020.GA26389 at yexl-desktop
> Status: Asked on the list, but issue still gets ignored by everyone
> Cause: https://git.kernel.org/torvalds/c/e585513b76
> Note: I'm a bit unsure if adding this issue to this list was a good idea.
> 
> Null dereference in rt5677_i2c_probe() (2017-07-17)
> https://bugzilla.kernel.org/show_bug.cgi?id=196397
> Linux-Regression-ID: lr#96bd63
> Status: Patch is available in in asoc-next as commit ddc9e69b9dc2, but
> was not part of the changes to this subsystem that got merged a few days ago
> Cause: https://git.kernel.org/torvalds/c/a36afb0ab6
> Latest: https://bugzilla.kernel.org/show_bug.cgi?id=196397#c6 (2017-07-17)
> 
> [I945GM] Pasted text not shown after mouse middle-click (2017-07-17)
> https://bugs.freedesktop.org/show_bug.cgi?id=101819
> Linux-Regression-ID: lr#d672f3
> Status: could not get reproduced yet
> Note: looks like it's getting ignored
> Latest: https://bugs.freedesktop.org/show_bug.cgi?id=101819#c8 (2017-07-17)
> 
> [Dell xps13 9630] Could not be woken up from suspend-to-idle via usb
> keyboard (2017-07-24)
> https://bugzilla.kernel.org/show_bug.cgi?id=196459
> Linux-Regression-ID: lr#bd29ab
> Status: it's a tracking bug, looks like issue is handled by Intel devs
> already
> Cause: https://git.kernel.org/torvalds/c/33e4f80ee6
> Note: suspend-to-idle is rare
> 
> [lkp-robot] [Btrfs]  28785f70ef: xfstests.generic.273.fail (2017-07-26)
> https://lkml.kernel.org/r/20170726062352.GC4877 at yexl-desktop
> Linux-Regression-ID: lr#a7d273
> Status: Seems it gets ignored by everyone
> Cause: https://git.kernel.org/torvalds/c/28785f70ef
> 
> Xen HVM guest with KASLR enabled wouldn't boot any longer  (2017-07-28)
> https://lkml.kernel.org/r/20170728102314.29100-1-jgross at suse.com
> Status: WIP, patches up for review, but were not part of the changes to
> this subsystem that got merged a few days ago
> 
> bio-integrity: Fix regression if profile verify_fn is NULL (2017-08-02)
> https://lkml.kernel.org/r/20170802122750.12216-1-gmazyland at gmail.com
> Linux-Regression-ID: lr#35498d
> Status: Discussion ongoing how to fix it properly
> Latest: https://lkml.kernel.org/r/yq13795epil.fsf at oracle.com (2017-08-02)
> 
> CIFS mount error -112 (2017-08-06)
> https://bugzilla.kernel.org/show_bug.cgi?id=196599
> Linux-Regression-ID: lr#60efe5
> Status: Brand new
> 
> 
> == Waiting for reporter ==
> 
> NULL pointer deref in networking (2017-07-29)
> https://bugzilla.kernel.org/show_bug.cgi?id=196529
> Linux-Regression-ID: lr#084be9
> Status: maybe reporter lost interest
> 
> SGI UV300/UV300: kernel BUG at arch/x86/mm/init_64.c:350! during boot
> (2017-08-02)
> https://bugzilla.kernel.org/show_bug.cgi?id=196561
> Status: not 100% sure if this is a regression
> Note: related to https://bugzilla.kernel.org/show_bug.cgi?id=196565 ?
> 
> 
> == Fixed since last weeks report ==
> 
> Dell XPS 13 9360: Touchscreen does not report events (2017-07-28)
> https://bugzilla.kernel.org/show_bug.cgi?id=196519
> Linux-Regression-ID: lr#fe68bb
> Status: Fixed in rc3
> 
> 
> == Legend ==
> 
> First few lines -> short summary followed by date and a link to the
>  report that lead to inclusion in this report
> Cause -> commit that causes this regression
> Status -> short start summary written by regression tracker
> Note -> additional note written by regression tracker
> Latest -> most recent and informative point where issue was discussed
> See also -> other places where this issue was or is discussed
> 
> Everything apart from the description and the link to the report is
> optional.
> 
> EOF

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20170808/7568c656/attachment.asc>

[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Rafael J. Wysocki]

On Tuesday, August 8, 2017 11:00:53 AM CEST Pavel Machek wrote:
> Hi!
> 
> Perhaps you should get regressions at kernel.org alias, or something like that?
> 
> > As always: Are you aware of any other regressions? Then please let me
> > know. For details see http://bit.ly/lnxregtrackid And please tell me if
> > there is anything in the report that shouldn't be there.
> 
> I am using wake-on-lan quite a bit, and it stopped working. I'll move
> to -rc4 and test there; but if anyone already has some ideas, let me
> know.
> 
> Hardware is thinkpad X220
> 
> 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network
> Connection (rev 04)

I guess this is ACPI S3 suspend?

Thanks,
Rafael

[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Pavel Machek]

On Wed 2017-08-09 02:45:54, Rafael J. Wysocki wrote:
> On Tuesday, August 8, 2017 11:00:53 AM CEST Pavel Machek wrote:
> > Hi!
> > 
> > Perhaps you should get regressions at kernel.org alias, or something like that?
> > 
> > > As always: Are you aware of any other regressions? Then please let me
> > > know. For details see http://bit.ly/lnxregtrackid And please tell me if
> > > there is anything in the report that shouldn't be there.
> > 
> > I am using wake-on-lan quite a bit, and it stopped working. I'll move
> > to -rc4 and test there; but if anyone already has some ideas, let me
> > know.
> > 
> > Hardware is thinkpad X220
> > 
> > 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network
> > Connection (rev 04)
> 
> I guess this is ACPI S3 suspend?

ACPI S3, right. Machine still wakes up properly when I hit a key on
USB keyboard.

Does wake on LAN work on you, on any hardware?
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20170809/d242df6e/attachment-0001.asc>

[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Rafael J. Wysocki]

[You seem to have a stale linux-pm address in your address book,
 I replaced it with the current one in the CC list.]

On Wednesday, August 9, 2017 8:42:31 AM CEST Pavel Machek wrote:
> On Wed 2017-08-09 02:45:54, Rafael J. Wysocki wrote:
> > On Tuesday, August 8, 2017 11:00:53 AM CEST Pavel Machek wrote:
> > > Hi!
> > > 
> > > Perhaps you should get regressions at kernel.org alias, or something like that?
> > > 
> > > > As always: Are you aware of any other regressions? Then please let me
> > > > know. For details see http://bit.ly/lnxregtrackid And please tell me if
> > > > there is anything in the report that shouldn't be there.
> > > 
> > > I am using wake-on-lan quite a bit, and it stopped working. I'll move
> > > to -rc4 and test there; but if anyone already has some ideas, let me
> > > know.
> > > 
> > > Hardware is thinkpad X220
> > > 
> > > 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network
> > > Connection (rev 04)
> > 
> > I guess this is ACPI S3 suspend?
> 
> ACPI S3, right. Machine still wakes up properly when I hit a key on
> USB keyboard.

OK, so my guess would be a driver issue.  What driver is this, igb?

> Does wake on LAN work on you, on any hardware?

Yes it does, I checked two machines earlier today, both work.

Can you enable dynamic debug in device_pm.c and send a dmesg output
with that covering a suspend-resume cycle?

Thanks,
Rafael

[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Hisashi T Fujinaka]

On Wed, 9 Aug 2017, Rafael J. Wysocki wrote:

> [You seem to have a stale linux-pm address in your address book,
> I replaced it with the current one in the CC list.]
>
> On Wednesday, August 9, 2017 8:42:31 AM CEST Pavel Machek wrote:
>> On Wed 2017-08-09 02:45:54, Rafael J. Wysocki wrote:
>>> On Tuesday, August 8, 2017 11:00:53 AM CEST Pavel Machek wrote:
>>>> Hi!
>>>>
>>>> Perhaps you should get regressions at kernel.org alias, or something like that?
>>>>
>>>>> As always: Are you aware of any other regressions? Then please let me
>>>>> know. For details see http://bit.ly/lnxregtrackid And please tell me if
>>>>> there is anything in the report that shouldn't be there.
>>>>
>>>> I am using wake-on-lan quite a bit, and it stopped working. I'll move
>>>> to -rc4 and test there; but if anyone already has some ideas, let me
>>>> know.
>>>>
>>>> Hardware is thinkpad X220
>>>>
>>>> 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network
>>>> Connection (rev 04)
>>>
>>> I guess this is ACPI S3 suspend?
>>
>> ACPI S3, right. Machine still wakes up properly when I hit a key on
>> USB keyboard.
>
> OK, so my guess would be a driver issue.  What driver is this, igb?
>
>> Does wake on LAN work on you, on any hardware?
>
> Yes it does, I checked two machines earlier today, both work.
>
> Can you enable dynamic debug in device_pm.c and send a dmesg output
> with that covering a suspend-resume cycle?

82579 is e1000e

-- 
Hisashi T Fujinaka - htodd at twofifty.com

[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Rafael J. Wysocki]

On Wed, Aug 9, 2017 at 11:15 PM, Hisashi T Fujinaka <htodd@twofifty.com> wrote:
> On Wed, 9 Aug 2017, Rafael J. Wysocki wrote:
>
>> [You seem to have a stale linux-pm address in your address book,
>> I replaced it with the current one in the CC list.]
>>
>> On Wednesday, August 9, 2017 8:42:31 AM CEST Pavel Machek wrote:
>>>
>>> On Wed 2017-08-09 02:45:54, Rafael J. Wysocki wrote:
>>>>
>>>> On Tuesday, August 8, 2017 11:00:53 AM CEST Pavel Machek wrote:
>>>>>
>>>>> Hi!
>>>>>
>>>>> Perhaps you should get regressions at kernel.org alias, or something like
>>>>> that?
>>>>>
>>>>>> As always: Are you aware of any other regressions? Then please let me
>>>>>> know. For details see http://bit.ly/lnxregtrackid And please tell me
>>>>>> if
>>>>>> there is anything in the report that shouldn't be there.
>>>>>
>>>>>
>>>>> I am using wake-on-lan quite a bit, and it stopped working. I'll move
>>>>> to -rc4 and test there; but if anyone already has some ideas, let me
>>>>> know.
>>>>>
>>>>> Hardware is thinkpad X220
>>>>>
>>>>> 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network
>>>>> Connection (rev 04)
>>>>
>>>>
>>>> I guess this is ACPI S3 suspend?
>>>
>>>
>>> ACPI S3, right. Machine still wakes up properly when I hit a key on
>>> USB keyboard.
>>
>>
>> OK, so my guess would be a driver issue.  What driver is this, igb?
>>
>>> Does wake on LAN work on you, on any hardware?
>>
>>
>> Yes it does, I checked two machines earlier today, both work.
>>
>> Can you enable dynamic debug in device_pm.c and send a dmesg output
>> with that covering a suspend-resume cycle?
>
>
> 82579 is e1000e

Hmm.  That also is there in my venerable Thoshiba Portege R500 which
wakes on LAN with 4.13-rc4.  So the driver is off the hook I guess.

[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Pavel Machek]

Hi!

> >[You seem to have a stale linux-pm address in your address book,
> >I replaced it with the current one in the CC list.]

Thanks, fixed.

> >>ACPI S3, right. Machine still wakes up properly when I hit a key on
> >>USB keyboard.
> >
> >OK, so my guess would be a driver issue.  What driver is this, igb?
> >
> >>Does wake on LAN work on you, on any hardware?
> >
> >Yes it does, I checked two machines earlier today, both work.
> >
> >Can you enable dynamic debug in device_pm.c and send a dmesg output
> >with that covering a suspend-resume cycle?
> 
> 82579 is e1000e

Thanks for all the help.

I now realized what was going on: I had badly inserted ethernet
cable; machine just connected to wifi, and everything worked... except
wake on LAN.

Sorry for the noise,

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20170809/458e2143/attachment.asc>

[Intel-wired-lan] [regression] wake on lan no longer works in 4.13-rc3. was Re: Linux 4.13: Reported regressions as of Sunday, 2017-08-06

[Rafael J. Wysocki]

On Wed, Aug 9, 2017 at 11:56 PM, Pavel Machek <pavel@ucw.cz> wrote:
> Hi!
>
>> >[You seem to have a stale linux-pm address in your address book,
>> >I replaced it with the current one in the CC list.]
>
> Thanks, fixed.
>
>> >>ACPI S3, right. Machine still wakes up properly when I hit a key on
>> >>USB keyboard.
>> >
>> >OK, so my guess would be a driver issue.  What driver is this, igb?
>> >
>> >>Does wake on LAN work on you, on any hardware?
>> >
>> >Yes it does, I checked two machines earlier today, both work.
>> >
>> >Can you enable dynamic debug in device_pm.c and send a dmesg output
>> >with that covering a suspend-resume cycle?
>>
>> 82579 is e1000e
>
> Thanks for all the help.
>
> I now realized what was going on: I had badly inserted ethernet
> cable; machine just connected to wifi, and everything worked... except
> wake on LAN.
>
> Sorry for the noise,

No worries. ;-)