From: Emil Tantilov <emil.s.tantilov@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH 4/9] ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING
Date: Mon, 11 Dec 2017 10:37:04 -0800 [thread overview]
Message-ID: <20171211183704.21524.88419.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20171211183537.21524.10133.stgit@localhost6.localdomain6>
Based on commit 5be5955425c2
("igb: update driver to make use of DMA_ATTR_SKIP_CPU_SYNC")
and
commit 7bd175928280 ("igb: Add support for DMA_ATTR_WEAK_ORDERING")
Convert the calls to dma_map/unmap_page() to the attributes version
and add DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING which should help
improve performance on some platforms.
Move sync_for_cpu call before we perform a prefetch to avoid
invalidating the first 128 bytes of the packet on architectures where
that call may invalidate the cache.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
---
drivers/net/ethernet/intel/ixgbevf/ixgbevf.h | 3 +
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 57 +++++++++++++--------
2 files changed, 38 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
index 581f44b..b1da9f4 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
@@ -260,6 +260,9 @@ static inline void ixgbevf_write_tail(struct ixgbevf_ring *ring, u32 value)
#define MIN_MSIX_Q_VECTORS 1
#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
+#define IXGBEVF_RX_DMA_ATTR \
+ (DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_WEAK_ORDERING)
+
/* board specific private data structure */
struct ixgbevf_adapter {
/* this field must be first, see ixgbevf_process_skb_fields */
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 725fe2d..fbd493e 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -595,8 +595,8 @@ static bool ixgbevf_alloc_mapped_page(struct ixgbevf_ring *rx_ring,
}
/* map page for use */
- dma = dma_map_page(rx_ring->dev, page, 0,
- PAGE_SIZE, DMA_FROM_DEVICE);
+ dma = dma_map_page_attrs(rx_ring->dev, page, 0, PAGE_SIZE,
+ DMA_FROM_DEVICE, IXGBEVF_RX_DMA_ATTR);
/* if mapping failed free memory back to system since
* there isn't much point in holding memory we can't use
@@ -639,6 +639,12 @@ static void ixgbevf_alloc_rx_buffers(struct ixgbevf_ring *rx_ring,
if (!ixgbevf_alloc_mapped_page(rx_ring, bi))
break;
+ /* sync the buffer for use by the device */
+ dma_sync_single_range_for_device(rx_ring->dev, bi->dma,
+ bi->page_offset,
+ IXGBEVF_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
/* Refresh the desc even if pkt_addr didn't change
* because each write-back erases this info.
*/
@@ -741,12 +747,6 @@ static void ixgbevf_reuse_rx_page(struct ixgbevf_ring *rx_ring,
new_buff->page = old_buff->page;
new_buff->dma = old_buff->dma;
new_buff->page_offset = old_buff->page_offset;
-
- /* sync the buffer for use by the device */
- dma_sync_single_range_for_device(rx_ring->dev, new_buff->dma,
- new_buff->page_offset,
- IXGBEVF_RX_BUFSZ,
- DMA_FROM_DEVICE);
}
static inline bool ixgbevf_page_is_reserved(struct page *page)
@@ -862,6 +862,13 @@ static struct sk_buff *ixgbevf_fetch_rx_buffer(struct ixgbevf_ring *rx_ring,
page = rx_buffer->page;
prefetchw(page);
+ /* we are reusing so sync this buffer for CPU use */
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ rx_buffer->dma,
+ rx_buffer->page_offset,
+ size,
+ DMA_FROM_DEVICE);
+
if (likely(!skb)) {
void *page_addr = page_address(page) +
rx_buffer->page_offset;
@@ -887,21 +894,15 @@ static struct sk_buff *ixgbevf_fetch_rx_buffer(struct ixgbevf_ring *rx_ring,
prefetchw(skb->data);
}
- /* we are reusing so sync this buffer for CPU use */
- dma_sync_single_range_for_cpu(rx_ring->dev,
- rx_buffer->dma,
- rx_buffer->page_offset,
- size,
- DMA_FROM_DEVICE);
-
/* pull page into skb */
if (ixgbevf_add_rx_frag(rx_ring, rx_buffer, size, rx_desc, skb)) {
/* hand second half of page back to the ring */
ixgbevf_reuse_rx_page(rx_ring, rx_buffer);
} else {
/* we are not reusing the buffer so unmap it */
- dma_unmap_page(rx_ring->dev, rx_buffer->dma,
- PAGE_SIZE, DMA_FROM_DEVICE);
+ dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE,
+ IXGBEVF_RX_DMA_ATTR);
}
/* clear contents of buffer_info */
@@ -2116,7 +2117,6 @@ void ixgbevf_up(struct ixgbevf_adapter *adapter)
**/
static void ixgbevf_clean_rx_ring(struct ixgbevf_ring *rx_ring)
{
- struct device *dev = rx_ring->dev;
unsigned long size;
unsigned int i;
@@ -2135,10 +2135,23 @@ static void ixgbevf_clean_rx_ring(struct ixgbevf_ring *rx_ring)
struct ixgbevf_rx_buffer *rx_buffer;
rx_buffer = &rx_ring->rx_buffer_info[i];
- if (rx_buffer->dma)
- dma_unmap_page(dev, rx_buffer->dma,
- PAGE_SIZE, DMA_FROM_DEVICE);
- rx_buffer->dma = 0;
+
+ /* Invalidate cache lines that may have been written to by
+ * device so that we avoid corrupting memory.
+ */
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ rx_buffer->dma,
+ rx_buffer->page_offset,
+ IXGBEVF_RX_BUFSZ,
+ DMA_FROM_DEVICE);
+
+ /* free resources associated with mapping */
+ dma_unmap_page_attrs(rx_ring->dev,
+ rx_buffer->dma,
+ PAGE_SIZE,
+ DMA_FROM_DEVICE,
+ IXGBEVF_RX_DMA_ATTR);
+
if (rx_buffer->page)
__free_page(rx_buffer->page);
rx_buffer->page = NULL;
next prev parent reply other threads:[~2017-12-11 18:37 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-11 18:36 [Intel-wired-lan] [PATCH 0/9] ixgbevf: update Rx/Tx code path for build_skb Emil Tantilov
2017-12-11 18:36 ` [Intel-wired-lan] [PATCH 1/9] ixgbevf: add function for checking if we can reuse page Emil Tantilov
2018-01-04 15:41 ` Singh, Krishneil K
2017-12-11 18:36 ` [Intel-wired-lan] [PATCH 2/9] ixgbevf: only DMA sync frame length Emil Tantilov
2018-01-04 15:43 ` Singh, Krishneil K
2018-02-26 15:55 ` Singh, Krishneil K
2017-12-11 18:36 ` [Intel-wired-lan] [PATCH 3/9] ixgbevf: use length to determine if descriptor is done Emil Tantilov
2018-01-04 15:44 ` Singh, Krishneil K
2018-02-26 15:57 ` Singh, Krishneil K
2017-12-11 18:37 ` Emil Tantilov [this message]
2018-01-04 15:46 ` [Intel-wired-lan] [PATCH 4/9] ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING Singh, Krishneil K
2018-02-26 15:54 ` Singh, Krishneil K
2017-12-11 18:37 ` [Intel-wired-lan] [PATCH 5/9] ixgbevf: update code to better handle incrementing page count Emil Tantilov
2018-01-04 15:46 ` Singh, Krishneil K
2018-02-26 15:56 ` Singh, Krishneil K
2017-12-11 18:37 ` [Intel-wired-lan] [PATCH 6/9] ixgbevf: add counters for Rx page allocations Emil Tantilov
2018-01-04 15:47 ` Singh, Krishneil K
2018-02-26 15:54 ` Singh, Krishneil K
2017-12-11 18:37 ` [Intel-wired-lan] [PATCH 7/9] ixgbevf: clear rx_buffer_info in configure instead of clean Emil Tantilov
2018-01-04 15:48 ` Singh, Krishneil K
2018-02-26 15:55 ` Singh, Krishneil K
2017-12-11 18:37 ` [Intel-wired-lan] [PATCH 8/9] ixgbevf: improve performance and reduce size of ixgbevf_tx_map() Emil Tantilov
2018-01-04 15:49 ` Singh, Krishneil K
2018-02-26 15:54 ` Singh, Krishneil K
2017-12-11 18:37 ` [Intel-wired-lan] [PATCH 9/9] ixgbevf: don't bother clearing tx_buffer_info in ixgbevf_clean_tx_ring() Emil Tantilov
2018-01-04 15:50 ` Singh, Krishneil K
2018-02-26 15:57 ` Singh, Krishneil K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171211183704.21524.88419.stgit@localhost6.localdomain6 \
--to=emil.s.tantilov@intel.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox