Intel-Wired-Lan Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Neftin <sasha.neftin@intel.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH v2] e1000e: Add support for Alder Lake
Date: Sun, 19 Jan 2020 09:46:01 +0200	[thread overview]
Message-ID: <20200119074601.33324-1-sasha.neftin@intel.com> (raw)

Add devices ID's for the next LOM generations that will be
available on the next Intel Client platform (Alder Lake)
This patch provides the initial support for these devices

v1->v2:
Address comminuty comments

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
---
 drivers/net/ethernet/intel/e1000e/ethtool.c | 3 ++-
 drivers/net/ethernet/intel/e1000e/hw.h      | 5 +++++
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 7 +++++++
 drivers/net/ethernet/intel/e1000e/netdev.c  | 7 ++++++-
 drivers/net/ethernet/intel/e1000e/ptp.c     | 1 +
 5 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index adce7e319b9e..aac0b7fb6243 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -895,8 +895,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	case e1000_pch_lpt:
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
-		/* fall through */
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		mask |= BIT(18);
 		break;
 	default:
@@ -1561,6 +1561,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		fext_nvm11 = er32(FEXTNVM11);
 		fext_nvm11 &= ~E1000_FEXTNVM11_DISABLE_MULR_FIX;
 		ew32(FEXTNVM11, fext_nvm11);
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index f556163481cb..a1dbf8df1c70 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -97,6 +97,10 @@ struct e1000_hw;
 #define E1000_DEV_ID_PCH_TGP_I219_LM14		0x15F9
 #define E1000_DEV_ID_PCH_TGP_I219_V14		0x15FA
 #define E1000_DEV_ID_PCH_TGP_I219_LM15		0x15F4
+#define E1000_DEV_ID_PCH_ADP_1219_LM16		0x1A1E
+#define E1000_DEV_ID_PCH_ADP_1219_V16		0x1A1F
+#define E1000_DEV_ID_PCH_ADP_1219_LM17		0x1A1C
+#define E1000_DEV_ID_PCH_ADP_1219_V17		0x1A1D
 
 #define E1000_REVISION_4	4
 
@@ -121,6 +125,7 @@ enum e1000_mac_type {
 	e1000_pch_spt,
 	e1000_pch_cnp,
 	e1000_pch_tgp,
+	e1000_pch_adp,
 };
 
 enum e1000_media_type {
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index b4135c50e905..735bf25952fc 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -317,6 +317,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		if (e1000_phy_is_accessible_pchlan(hw))
 			break;
 
@@ -460,6 +461,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		case e1000_pch_spt:
 		case e1000_pch_cnp:
 		case e1000_pch_tgp:
+		case e1000_pch_adp:
 			/* In case the PHY needs to be in mdio slow mode,
 			 * set slow mode and try to get the PHY id again.
 			 */
@@ -703,6 +705,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 	case e1000_pchlan:
 		/* check management mode */
 		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
@@ -1642,6 +1645,7 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		rc = e1000_init_phy_params_pchlan(hw);
 		break;
 	default:
@@ -2095,6 +2099,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
 		break;
 	default:
@@ -3133,6 +3138,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		bank1_offset = nvm->flash_bank_size;
 		act_offset = E1000_ICH_NVM_SIG_WORD;
 
@@ -4077,6 +4083,7 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		word = NVM_COMPAT;
 		valid_csum_mask = NVM_COMPAT_VALID_CSUM;
 		break;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 60df6f2663c0..54b1768b1807 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3539,6 +3539,7 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
 		break;
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
 			/* Stable 24MHz frequency */
 			incperiod = INCPERIOD_24MHZ;
@@ -4050,8 +4051,8 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	case e1000_pch_lpt:
 	case e1000_pch_spt:
 	case e1000_pch_cnp:
-		/* fall-through */
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		fc->refresh_time = 0xFFFF;
 		fc->pause_time = 0xFFFF;
 
@@ -7764,6 +7765,10 @@ static const struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM14), board_pch_cnp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_cnp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_1219_LM16), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_1219_V16), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_1219_LM17), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_1219_V17), board_pch_cnp },
 
 	{ 0, 0, 0, 0, 0, 0, 0 }	/* terminate list */
 };
diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
index eaa5a0fb99f0..439fda2f5368 100644
--- a/drivers/net/ethernet/intel/e1000e/ptp.c
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -297,6 +297,7 @@ void e1000e_ptp_init(struct e1000_adapter *adapter)
 	case e1000_pch_cnp:
 		/* fall-through */
 	case e1000_pch_tgp:
+	case e1000_pch_adp:
 		if ((hw->mac.type < e1000_pch_lpt) ||
 		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
 			adapter->ptp_clock_info.max_adj = 24000000 - 1;
-- 
2.11.0


             reply	other threads:[~2020-01-19  7:46 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-19  7:46 Sasha Neftin [this message]
2020-01-19 11:02 ` [Intel-wired-lan] [PATCH v2] e1000e: Add support for Alder Lake Paul Menzel
2020-01-19 11:55   ` Neftin, Sasha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200119074601.33324-1-sasha.neftin@intel.com \
    --to=sasha.neftin@intel.com \
    --cc=intel-wired-lan@osuosl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox