[Intel-wired-lan] [PATCH AUTOSEL 5.12 036/160] e100: handle eeprom as little endian

[Intel-wired-lan] [PATCH AUTOSEL 5.12 036/160] e100: handle eeprom as little endian

[Sasha Levin]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]

Sparse tool was warning on some implicit conversions from
little endian data read from the EEPROM on the e100 cards.

Fix these by being explicit about the conversions using
le16_to_cpu().

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e100.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index f8d78af76d7d..1b0958bd24f6 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1395,7 +1395,7 @@ static int e100_phy_check_without_mii(struct nic *nic)
 	u8 phy_type;
 	int without_mii;
 
-	phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+	phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f;
 
 	switch (phy_type) {
 	case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
@@ -1515,7 +1515,7 @@ static int e100_phy_init(struct nic *nic)
 		mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
 	} else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
 	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
-		(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+	   (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) {
 		/* enable/disable MDI/MDI-X auto-switching. */
 		mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
 				nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
@@ -2269,9 +2269,9 @@ static int e100_asf(struct nic *nic)
 {
 	/* ASF can be enabled from eeprom */
 	return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
-	   (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
-	   !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
-	   ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
+	   (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) &&
+	   !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) &&
+	   ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE);
 }
 
 static int e100_up(struct nic *nic)
@@ -2926,7 +2926,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Wol magic packet can be enabled from eeprom */
 	if ((nic->mac >= mac_82558_D101_A4) &&
-	   (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+	   (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) {
 		nic->flags |= wol_magic;
 		device_set_wakeup_enable(&pdev->dev, true);
 	}
-- 
2.30.2

[Intel-wired-lan] [PATCH AUTOSEL 5.12 037/160] igb: handle vlan types with checker enabled

[Sasha Levin]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit c7cbfb028b95360403d579c47aaaeef1ff140964 ]

The sparse build (C=2) finds some issues with how the driver
dealt with the (very difficult) hardware that in some generations
uses little-endian, and in others uses big endian, for the VLAN
field. The code as written picks __le16 as a type and for some
hardware revisions we override it to __be16 as done in this
patch. This impacted the VF driver as well so fix it there too.

Also change the vlan_tci assignment to override the sparse
warning without changing functionality.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 5 +++--
 drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index caa8929289ae..894b9b87dba1 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2643,7 +2643,8 @@ static int igb_parse_cls_flower(struct igb_adapter *adapter,
 			}
 
 			input->filter.match_flags |= IGB_FILTER_FLAG_VLAN_TCI;
-			input->filter.vlan_tci = match.key->vlan_priority;
+			input->filter.vlan_tci =
+				(__force __be16)match.key->vlan_priority;
 		}
 	}
 
@@ -8593,7 +8594,7 @@ static void igb_process_skb_fields(struct igb_ring *rx_ring,
 
 		if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) &&
 		    test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags))
-			vid = be16_to_cpu(rx_desc->wb.upper.vlan);
+			vid = be16_to_cpu((__force __be16)rx_desc->wb.upper.vlan);
 		else
 			vid = le16_to_cpu(rx_desc->wb.upper.vlan);
 
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index fb3fbcb13331..630c1155f196 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -83,14 +83,14 @@ static int igbvf_desc_unused(struct igbvf_ring *ring)
 static void igbvf_receive_skb(struct igbvf_adapter *adapter,
 			      struct net_device *netdev,
 			      struct sk_buff *skb,
-			      u32 status, u16 vlan)
+			      u32 status, __le16 vlan)
 {
 	u16 vid;
 
 	if (status & E1000_RXD_STAT_VP) {
 		if ((adapter->flags & IGBVF_FLAG_RX_LB_VLAN_BSWAP) &&
 		    (status & E1000_RXDEXT_STATERR_LB))
-			vid = be16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
+			vid = be16_to_cpu((__force __be16)vlan) & E1000_RXD_SPC_VLAN_MASK;
 		else
 			vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
 		if (test_bit(vid, adapter->active_vlans))
-- 
2.30.2

[Intel-wired-lan] [PATCH AUTOSEL 5.12 038/160] igb: fix assignment on big endian machines

[Sasha Levin]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit b514958dd1a3bd57638b0e63b8e5152b1960e6aa ]

The igb driver was trying hard to be sparse correct, but somehow
ended up converting a variable into little endian order and then
tries to OR something with it.

A much plainer way of doing things is to leave all variables and
OR operations in CPU (non-endian) mode, and then convert to
little endian only once, which is what this change does.

This probably fixes a bug that might have been seen only on
big endian systems.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 894b9b87dba1..434220a342df 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -6277,12 +6277,12 @@ int igb_xmit_xdp_ring(struct igb_adapter *adapter,
 	cmd_type |= len | IGB_TXD_DCMD;
 	tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
 
-	olinfo_status = cpu_to_le32(len << E1000_ADVTXD_PAYLEN_SHIFT);
+	olinfo_status = len << E1000_ADVTXD_PAYLEN_SHIFT;
 	/* 82575 requires a unique index per ring */
 	if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags))
 		olinfo_status |= tx_ring->reg_idx << 4;
 
-	tx_desc->read.olinfo_status = olinfo_status;
+	tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
 
 	netdev_tx_sent_queue(txring_txq(tx_ring), tx_buffer->bytecount);
 
-- 
2.30.2

[Intel-wired-lan] [PATCH AUTOSEL 5.12 067/160] ice: set the value of global config lock timeout longer

[Sasha Levin]

From: Liwei Song <liwei.song@windriver.com>

[ Upstream commit fb3612840d4f587a0af9511a11d7989d1fa48206 ]

It may need hold Global Config Lock a longer time when download DDP
package file, extend the timeout value to 5000ms to ensure that
download can be finished before other AQ command got time to run,
this will fix the issue below when probe the device, 5000ms is a test
value that work with both Backplane and BreakoutCable NVM image:

ice 0000:f4:00.0: VSI 12 failed lan queue config, error ICE_ERR_CFG
ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error: ICE_ERR_AQ_TIMEOUT
ice 0000:f4:00.0: probe failed due to setup PF switch: -12
ice: probe of 0000:f4:00.0 failed with error -12

Signed-off-by: Liwei Song <liwei.song@windriver.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_type.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 266036b7a49a..8a90c47e337d 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -63,7 +63,7 @@ enum ice_aq_res_ids {
 /* FW update timeout definitions are in milliseconds */
 #define ICE_NVM_TIMEOUT			180000
 #define ICE_CHANGE_LOCK_TIMEOUT		1000
-#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	3000
+#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	5000
 
 enum ice_aq_res_access_type {
 	ICE_RES_READ = 1,
-- 
2.30.2

[Intel-wired-lan] [PATCH AUTOSEL 5.12 068/160] ice: fix clang warning regarding deadcode.DeadStores

[Sasha Levin]

From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>

[ Upstream commit 7e94090ae13e1ae5fe8bd3a9cd08136260bb7039 ]

clang generates deadcode.DeadStores warnings when a variable
is used to read a value, but then that value isn't used later
in the code. Fix this warning.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index f80fff97d8dc..0d136708f960 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -3492,13 +3492,9 @@ static int
 ice_get_rc_coalesce(struct ethtool_coalesce *ec, enum ice_container_type c_type,
 		    struct ice_ring_container *rc)
 {
-	struct ice_pf *pf;
-
 	if (!rc->ring)
 		return -EINVAL;
 
-	pf = rc->ring->vsi->back;
-
 	switch (c_type) {
 	case ICE_RX_CONTAINER:
 		ec->use_adaptive_rx_coalesce = ITR_IS_DYNAMIC(rc->itr_setting);
@@ -3510,7 +3506,7 @@ ice_get_rc_coalesce(struct ethtool_coalesce *ec, enum ice_container_type c_type,
 		ec->tx_coalesce_usecs = rc->itr_setting & ~ICE_ITR_DYNAMIC;
 		break;
 	default:
-		dev_dbg(ice_pf_to_dev(pf), "Invalid c_type %d\n", c_type);
+		dev_dbg(ice_pf_to_dev(rc->ring->vsi->back), "Invalid c_type %d\n", c_type);
 		return -EINVAL;
 	}
 
-- 
2.30.2

[Intel-wired-lan] [PATCH AUTOSEL 5.12 099/160] ice: fix incorrect payload indicator on PTYPE

[Sasha Levin]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 638a0c8c8861cb8a3b54203e632ea5dcc23d8ca5 ]

The entry for PTYPE 90 indicates that the payload is layer 3. This does
not match the specification in the datasheet which indicates the packet
is a MAC, IPv6, UDP packet, with a payload in layer 4.

Fix the lookup table to match the data sheet.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
index 4ec24c3e813f..98a7f27c532b 100644
--- a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
+++ b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
@@ -722,7 +722,7 @@ static const struct ice_rx_ptype_decoded ice_ptype_lkup[] = {
 	/* Non Tunneled IPv6 */
 	ICE_PTT(88, IP, IPV6, FRG, NONE, NONE, NOF, NONE, PAY3),
 	ICE_PTT(89, IP, IPV6, NOF, NONE, NONE, NOF, NONE, PAY3),
-	ICE_PTT(90, IP, IPV6, NOF, NONE, NONE, NOF, UDP,  PAY3),
+	ICE_PTT(90, IP, IPV6, NOF, NONE, NONE, NOF, UDP,  PAY4),
 	ICE_PTT_UNUSED_ENTRY(91),
 	ICE_PTT(92, IP, IPV6, NOF, NONE, NONE, NOF, TCP,  PAY4),
 	ICE_PTT(93, IP, IPV6, NOF, NONE, NONE, NOF, SCTP, PAY4),
-- 
2.30.2

[Intel-wired-lan] [PATCH AUTOSEL 5.12 100/160] ice: mark PTYPE 2 as reserved

[Sasha Levin]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 0c526d440f76676733cb470b454db9d5507a3a50 ]

The entry for PTYPE 2 in the ice_ptype_lkup table incorrectly states
that this is an L2 packet with no payload. According to the datasheet,
this PTYPE is actually unused and reserved.

Fix the lookup entry to indicate this is an unused entry that is
reserved.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
index 98a7f27c532b..c0ee0541e53f 100644
--- a/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
+++ b/drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h
@@ -608,7 +608,7 @@ static const struct ice_rx_ptype_decoded ice_ptype_lkup[] = {
 	/* L2 Packet types */
 	ICE_PTT_UNUSED_ENTRY(0),
 	ICE_PTT(1, L2, NONE, NOF, NONE, NONE, NOF, NONE, PAY2),
-	ICE_PTT(2, L2, NONE, NOF, NONE, NONE, NOF, NONE, NONE),
+	ICE_PTT_UNUSED_ENTRY(2),
 	ICE_PTT_UNUSED_ENTRY(3),
 	ICE_PTT_UNUSED_ENTRY(4),
 	ICE_PTT_UNUSED_ENTRY(5),
-- 
2.30.2