[Intel-wired-lan] [PATCH AUTOSEL 4.19 16/55] e100: handle eeprom as little endian

[Intel-wired-lan] [PATCH AUTOSEL 4.19 16/55] e100: handle eeprom as little endian

[Sasha Levin]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]

Sparse tool was warning on some implicit conversions from
little endian data read from the EEPROM on the e100 cards.

Fix these by being explicit about the conversions using
le16_to_cpu().

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e100.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 78b44d787638..bf64fab38385 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1398,7 +1398,7 @@ static int e100_phy_check_without_mii(struct nic *nic)
 	u8 phy_type;
 	int without_mii;
 
-	phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+	phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f;
 
 	switch (phy_type) {
 	case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
@@ -1518,7 +1518,7 @@ static int e100_phy_init(struct nic *nic)
 		mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
 	} else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
 	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
-		(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+	   (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) {
 		/* enable/disable MDI/MDI-X auto-switching. */
 		mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
 				nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
@@ -2264,9 +2264,9 @@ static int e100_asf(struct nic *nic)
 {
 	/* ASF can be enabled from eeprom */
 	return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
-	   (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
-	   !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
-	   ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
+	   (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) &&
+	   !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) &&
+	   ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE);
 }
 
 static int e100_up(struct nic *nic)
@@ -2922,7 +2922,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Wol magic packet can be enabled from eeprom */
 	if ((nic->mac >= mac_82558_D101_A4) &&
-	   (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+	   (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) {
 		nic->flags |= wol_magic;
 		device_set_wakeup_enable(&pdev->dev, true);
 	}
-- 
2.30.2

[Intel-wired-lan] [PATCH AUTOSEL 4.19 23/55] ice: set the value of global config lock timeout longer

[Sasha Levin]

From: Liwei Song <liwei.song@windriver.com>

[ Upstream commit fb3612840d4f587a0af9511a11d7989d1fa48206 ]

It may need hold Global Config Lock a longer time when download DDP
package file, extend the timeout value to 5000ms to ensure that
download can be finished before other AQ command got time to run,
this will fix the issue below when probe the device, 5000ms is a test
value that work with both Backplane and BreakoutCable NVM image:

ice 0000:f4:00.0: VSI 12 failed lan queue config, error ICE_ERR_CFG
ice 0000:f4:00.0: Failed to delete VSI 12 in FW - error: ICE_ERR_AQ_TIMEOUT
ice 0000:f4:00.0: probe failed due to setup PF switch: -12
ice: probe of 0000:f4:00.0 failed with error -12

Signed-off-by: Liwei Song <liwei.song@windriver.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_type.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 5ca9d684429d..8105f11f0199 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -41,7 +41,7 @@ enum ice_aq_res_ids {
 /* FW update timeout definitions are in milliseconds */
 #define ICE_NVM_TIMEOUT			180000
 #define ICE_CHANGE_LOCK_TIMEOUT		1000
-#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	3000
+#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	5000
 
 enum ice_aq_res_access_type {
 	ICE_RES_READ = 1,
-- 
2.30.2