From: Nitesh Narayan Lal <nitesh@redhat.com>
To: intel-wired-lan@osuosl.org
Subject: [Intel-wired-lan] [PATCH v3 04/14] scsi: megaraid_sas: Use irq_set_affinity_and_hint
Date: Tue, 13 Jul 2021 17:14:52 -0400 [thread overview]
Message-ID: <20210713211502.464259-5-nitesh@redhat.com> (raw)
In-Reply-To: <20210713211502.464259-1-nitesh@redhat.com>
The driver uses irq_set_affinity_hint() specifically for the high IOPS
queue interrupts for two purposes:
- To set the affinity_hint which is consumed by the userspace for
? distributing the interrupts
- To apply an affinity that it provides
The driver enforces its own affinity to bind the high IOPS queue interrupts
to the local NUMA node. However, irq_set_affinity_hint() applying the
provided cpumask as an affinity for the interrupt is an undocumented side
effect.
To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint()
where the provided mask needs to be applied as the affinity and
affinity_hint pointer needs to be set and replace with
irq_update_affinity_hint() where only affinity_hint needs to be updated.
Change the megasas_set_high_iops_queue_affinity_hint function name to
megasas_set_high_iops_queue_affinity_and_hint to clearly indicate that the
function is setting both affinity and affinity_hint.
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 27 +++++++++++++----------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index ec10b2497310..836a1b13f71b 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -5718,7 +5718,7 @@ megasas_setup_irqs_msix(struct megasas_instance *instance, u8 is_probe)
"Failed to register IRQ for vector %d.\n", i);
for (j = 0; j < i; j++) {
if (j < instance->low_latency_index_start)
- irq_set_affinity_hint(
+ irq_update_affinity_hint(
pci_irq_vector(pdev, j), NULL);
free_irq(pci_irq_vector(pdev, j),
&instance->irq_context[j]);
@@ -5761,7 +5761,7 @@ megasas_destroy_irqs(struct megasas_instance *instance) {
if (instance->msix_vectors)
for (i = 0; i < instance->msix_vectors; i++) {
if (i < instance->low_latency_index_start)
- irq_set_affinity_hint(
+ irq_update_affinity_hint(
pci_irq_vector(instance->pdev, i), NULL);
free_irq(pci_irq_vector(instance->pdev, i),
&instance->irq_context[i]);
@@ -5892,22 +5892,25 @@ int megasas_get_device_list(struct megasas_instance *instance)
}
/**
- * megasas_set_high_iops_queue_affinity_hint - Set affinity hint for high IOPS queues
- * @instance: Adapter soft state
- * return: void
+ * megasas_set_high_iops_queue_affinity_and_hint - Set affinity and hint
+ * for high IOPS queues
+ * @instance: Adapter soft state
+ * return: void
*/
static inline void
-megasas_set_high_iops_queue_affinity_hint(struct megasas_instance *instance)
+megasas_set_high_iops_queue_affinity_and_hint(struct megasas_instance *instance)
{
int i;
- int local_numa_node;
+ unsigned int irq;
+ const struct cpumask *mask;
if (instance->perf_mode == MR_BALANCED_PERF_MODE) {
- local_numa_node = dev_to_node(&instance->pdev->dev);
+ mask = cpumask_of_node(dev_to_node(&instance->pdev->dev));
- for (i = 0; i < instance->low_latency_index_start; i++)
- irq_set_affinity_hint(pci_irq_vector(instance->pdev, i),
- cpumask_of_node(local_numa_node));
+ for (i = 0; i < instance->low_latency_index_start; i++) {
+ irq = pci_irq_vector(instance->pdev, i);
+ irq_set_affinity_and_hint(irq, mask);
+ }
}
}
@@ -5996,7 +5999,7 @@ megasas_alloc_irq_vectors(struct megasas_instance *instance)
instance->msix_vectors = 0;
if (instance->smp_affinity_enable)
- megasas_set_high_iops_queue_affinity_hint(instance);
+ megasas_set_high_iops_queue_affinity_and_hint(instance);
}
/**
--
2.27.0
next prev parent reply other threads:[~2021-07-13 21:14 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-13 21:14 [Intel-wired-lan] [PATCH v3 00/14] genirq: Cleanup the usage of irq_set_affinity_hint Nitesh Narayan Lal
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 01/14] genirq: Provide new interfaces for affinity hints Nitesh Narayan Lal
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 02/14] iavf: Use irq_update_affinity_hint Nitesh Narayan Lal
2021-07-13 21:51 ` Jesse Brandeburg
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 03/14] i40e: " Nitesh Narayan Lal
2021-07-13 21:52 ` Jesse Brandeburg
2021-07-13 21:14 ` Nitesh Narayan Lal [this message]
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 05/14] scsi: mpt3sas: Use irq_set_affinity_and_hint Nitesh Narayan Lal
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 06/14] RDMA/irdma: " Nitesh Narayan Lal
2021-07-14 12:03 ` Leon Romanovsky
2021-07-14 12:56 ` Nitesh Lal
2021-07-14 13:02 ` Leon Romanovsky
2021-07-15 13:25 ` Nitesh Lal
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 07/14] enic: Use irq_update_affinity_hint Nitesh Narayan Lal
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 08/14] be2net: " Nitesh Narayan Lal
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 09/14] ixgbe: " Nitesh Narayan Lal
2021-07-13 22:01 ` Jesse Brandeburg
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 10/14] mailbox: " Nitesh Narayan Lal
2021-07-13 21:14 ` [Intel-wired-lan] [PATCH v3 11/14] scsi: lpfc: Use irq_set_affinity Nitesh Narayan Lal
2021-07-13 21:15 ` [Intel-wired-lan] [PATCH v3 12/14] hinic: Use irq_set_affinity_and_hint Nitesh Narayan Lal
2021-07-13 21:15 ` [Intel-wired-lan] [PATCH v3 13/14] net/mlx5: " Nitesh Narayan Lal
2021-07-14 12:01 ` Leon Romanovsky
2021-07-13 21:15 ` [Intel-wired-lan] [PATCH v3 14/14] net/mlx4: Use irq_update_affinity_hint Nitesh Narayan Lal
2021-07-14 11:19 ` Tariq Toukan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210713211502.464259-5-nitesh@redhat.com \
--to=nitesh@redhat.com \
--cc=intel-wired-lan@osuosl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox