* [Intel-wired-lan] [PATCH v3 20/38] net: handle HAS_IOPORT dependencies
[not found] <20230314121216.413434-1-schnelle@linux.ibm.com>
@ 2023-03-14 12:11 ` Niklas Schnelle
2023-03-15 5:41 ` Jakub Kicinski
0 siblings, 1 reply; 2+ messages in thread
From: Niklas Schnelle @ 2023-03-14 12:11 UTC (permalink / raw)
To: Arnd Bergmann, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Michael Grzeschik, Wolfgang Grandegger,
Marc Kleine-Budde, Jesse Brandeburg, Tony Nguyen,
Maciej W. Rozycki, Ralf Baechle
Cc: linux-arch, Arnd Bergmann, Albert Ou, linux-hams,
Rafael J. Wysocki, Greg Kroah-Hartman, Paul Walmsley, linux-pci,
linux-kernel, linux-can, netdev, Alan Stern,
Uwe Kleine-König, Bjorn Helgaas, Geert Uytterhoeven,
Mauro Carvalho Chehab, Palmer Dabbelt, intel-wired-lan
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers requiring them. For the DEFXX driver there use of I/O
ports is optional and we only need to fence those paths.can It also
turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need
the !S390 dependency and successfully builds the bpqether driver.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
drivers/net/Kconfig | 2 +-
drivers/net/arcnet/Kconfig | 2 +-
drivers/net/can/cc770/Kconfig | 1 +
drivers/net/can/sja1000/Kconfig | 1 +
drivers/net/ethernet/3com/Kconfig | 4 ++--
drivers/net/ethernet/8390/Kconfig | 6 +++---
drivers/net/ethernet/amd/Kconfig | 4 ++--
drivers/net/ethernet/fujitsu/Kconfig | 2 +-
drivers/net/ethernet/intel/Kconfig | 2 +-
drivers/net/ethernet/sis/Kconfig | 4 ++--
drivers/net/ethernet/smsc/Kconfig | 2 +-
drivers/net/ethernet/ti/Kconfig | 2 +-
drivers/net/ethernet/via/Kconfig | 1 +
drivers/net/ethernet/xircom/Kconfig | 2 +-
drivers/net/fddi/Kconfig | 2 +-
drivers/net/fddi/defxx.c | 2 +-
drivers/net/hamradio/Kconfig | 6 +++---
drivers/net/wan/Kconfig | 2 +-
net/ax25/Kconfig | 2 +-
19 files changed, 26 insertions(+), 23 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c34bd432da27..170387314f1b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -474,7 +474,7 @@ source "drivers/net/ipa/Kconfig"
config NET_SB1000
tristate "General Instruments Surfboard 1000"
- depends on PNP
+ depends on ISA && PNP
help
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index a51b9dab6d3a..d1d07a1d4fbc 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -4,7 +4,7 @@
#
menuconfig ARCNET
- depends on NETDEVICES && (ISA || PCI || PCMCIA)
+ depends on NETDEVICES && (ISA || PCI || PCMCIA) && HAS_IOPORT
tristate "ARCnet support"
help
If you have a network card of this type, say Y and check out the
diff --git a/drivers/net/can/cc770/Kconfig b/drivers/net/can/cc770/Kconfig
index 9ef1359319f0..467ef19de1c1 100644
--- a/drivers/net/can/cc770/Kconfig
+++ b/drivers/net/can/cc770/Kconfig
@@ -7,6 +7,7 @@ if CAN_CC770
config CAN_CC770_ISA
tristate "ISA Bus based legacy CC770 driver"
+ depends on ISA
help
This driver adds legacy support for CC770 and AN82527 chips
connected to the ISA bus using I/O port, memory mapped or
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 4b2f9cb17fc3..01168db4c106 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -87,6 +87,7 @@ config CAN_PLX_PCI
config CAN_SJA1000_ISA
tristate "ISA Bus based legacy SJA1000 driver"
+ depends on ISA
help
This driver adds legacy support for SJA1000 chips connected to
the ISA bus using I/O port, memory mapped or indirect access.
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index 706bd59bf645..1fbab79e2be4 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -44,7 +44,7 @@ config 3C515
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
@@ -54,7 +54,7 @@ config PCMCIA_3C574
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a4130e643342..345f250781c6 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_8390
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
@@ -117,7 +117,7 @@ config NE2000
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
help
This driver is for NE2000 compatible PCI cards. It will not work
@@ -146,7 +146,7 @@ config APNE
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index ab42f75b9413..2f19b4a24d53 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -56,7 +56,7 @@ config LANCE
config PCNET32
tristate "AMD PCnet32 PCI support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
@@ -122,7 +122,7 @@ config MVME147_NET
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index 0a1400cb410a..06a28bce5d27 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -18,7 +18,7 @@ if NET_VENDOR_FUJITSU
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index c18c3b373846..bfb182310135 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -41,7 +41,7 @@ config E100
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index 775d76d9890e..7e498bdbca73 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_SIS
config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
@@ -35,7 +35,7 @@ config SIS900
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 5f22a8a4d27b..13ce9086a9ca 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -54,7 +54,7 @@ config SMC91X
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
select MII
help
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index fce06663e1e1..20068acce9fe 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -161,7 +161,7 @@ config TI_KEYSTONE_NETCP_ETHSS
config TLAN
tristate "TI ThunderLAN support"
- depends on (PCI || EISA)
+ depends on (PCI || EISA) && HAS_IOPORT
help
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y here.
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index da287ef65be7..00773f5e4d7e 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -20,6 +20,7 @@ config VIA_RHINE
tristate "VIA Rhine support"
depends on PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
depends on PCI || ARCH_VT8500 || COMPILE_TEST
+ depends on HAS_IOPORT
depends on HAS_DMA
select CRC32
select MII
diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
index 7497b9bea511..bfbdcf758afb 100644
--- a/drivers/net/ethernet/xircom/Kconfig
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_XIRCOM
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig
index 846bf41c2717..fa3f1e0fe143 100644
--- a/drivers/net/fddi/Kconfig
+++ b/drivers/net/fddi/Kconfig
@@ -29,7 +29,7 @@ config DEFZA
config DEFXX
tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
- depends on FDDI && (PCI || EISA || TC)
+ depends on FDDI && (PCI || EISA || TC) && HAS_IOPORT
help
This is support for the DIGITAL series of TURBOchannel (DEFTA),
EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index 1fef8a9b1a0f..5f386eba9618 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -254,7 +254,7 @@ static const char version[] =
#define DFX_BUS_TC(dev) 0
#endif
-#if defined(CONFIG_EISA) || defined(CONFIG_PCI)
+#ifdef HAS_IOPORT
#define dfx_use_mmio bp->mmio
#else
#define dfx_use_mmio true
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index a9c44f08199d..0ac87b90b01e 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -83,7 +83,7 @@ config SCC_TRXECHO
config BAYCOM_SER_FDX
tristate "BAYCOM ser12 fullduplex driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
select CRC_CCITT
help
This is one of two drivers for Baycom style simple amateur radio
@@ -103,7 +103,7 @@ config BAYCOM_SER_FDX
config BAYCOM_SER_HDX
tristate "BAYCOM ser12 halfduplex driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
select CRC_CCITT
help
This is one of two drivers for Baycom style simple amateur radio
@@ -151,7 +151,7 @@ config BAYCOM_EPP
config YAM
tristate "YAM driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
help
The YAM is a modem for packet radio which connects to the serial
port and includes some of the functions of a Terminal Node
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index dcb069dde66b..417e2c2d349d 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -178,7 +178,7 @@ config C101
config FARSYNC
tristate "FarSync T-Series support"
- depends on HDLC && PCI
+ depends on HDLC && PCI && HAS_IOPORT
help
Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
FarSite Communications Ltd.
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index d3a9843a043d..f769e8f4bd02 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -4,7 +4,7 @@
#
menuconfig HAMRADIO
- depends on NET && !S390
+ depends on NET
bool "Amateur Radio support"
help
If you want to connect your Linux box to an amateur radio, answer Y
--
2.37.2
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
^ permalink raw reply related [flat|nested] 2+ messages in thread