[Intel-wired-lan] [PATCH iwl-net v2 1/2] igc: Expose tx-usecs coalesce setting to user

[Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>]

When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.

Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.

How to test:
User can get the coalesce value using ethtool command.

Example command:
Get: ethtool -c <interface>

Previous output:

rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a

New output:

rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a

tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a

Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 93bce729be76..62d925b26f2c 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -880,12 +880,10 @@ static int igc_ethtool_get_coalesce(struct net_device *netdev,
 	else
 		ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
 
-	if (!(adapter->flags & IGC_FLAG_QUEUE_PAIRS)) {
-		if (adapter->tx_itr_setting <= 3)
-			ec->tx_coalesce_usecs = adapter->tx_itr_setting;
-		else
-			ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
-	}
+	if (adapter->tx_itr_setting <= 3)
+		ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+	else
+		ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
 
 	return 0;
 }
@@ -910,9 +908,6 @@ static int igc_ethtool_set_coalesce(struct net_device *netdev,
 	    ec->tx_coalesce_usecs == 2)
 		return -EINVAL;
 
-	if ((adapter->flags & IGC_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
-		return -EINVAL;
-
 	/* If ITR is disabled, disable DMAC */
 	if (ec->rx_coalesce_usecs == 0) {
 		if (adapter->flags & IGC_FLAG_DMAC)
-- 
2.17.1

_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan