[Intel-wired-lan] [PATCH AUTOSEL 6.10 007/197] ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node()

[Intel-wired-lan] [PATCH AUTOSEL 6.10 007/197] ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node()

[Sasha Levin]

From: Aleksandr Mishin <amishin@t-argos.ru>

[ Upstream commit 62fdaf9e8056e9a9e6fe63aa9c816ec2122d60c6 ]

In ice_sched_add_root_node() and ice_sched_add_node() there are calls to
devm_kcalloc() in order to allocate memory for array of pointers to
'ice_sched_node' structure. But incorrect types are used as sizeof()
arguments in these calls (structures instead of pointers) which leads to
over allocation of memory.

Adjust over allocation of memory by correcting types in devm_kcalloc()
sizeof() arguments.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_sched.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c
index ecf8f5d602921..6ca13c5dcb14e 100644
--- a/drivers/net/ethernet/intel/ice/ice_sched.c
+++ b/drivers/net/ethernet/intel/ice/ice_sched.c
@@ -28,9 +28,8 @@ ice_sched_add_root_node(struct ice_port_info *pi,
 	if (!root)
 		return -ENOMEM;
 
-	/* coverity[suspicious_sizeof] */
 	root->children = devm_kcalloc(ice_hw_to_dev(hw), hw->max_children[0],
-				      sizeof(*root), GFP_KERNEL);
+				      sizeof(*root->children), GFP_KERNEL);
 	if (!root->children) {
 		devm_kfree(ice_hw_to_dev(hw), root);
 		return -ENOMEM;
@@ -186,10 +185,9 @@ ice_sched_add_node(struct ice_port_info *pi, u8 layer,
 	if (!node)
 		return -ENOMEM;
 	if (hw->max_children[layer]) {
-		/* coverity[suspicious_sizeof] */
 		node->children = devm_kcalloc(ice_hw_to_dev(hw),
 					      hw->max_children[layer],
-					      sizeof(*node), GFP_KERNEL);
+					      sizeof(*node->children), GFP_KERNEL);
 		if (!node->children) {
 			devm_kfree(ice_hw_to_dev(hw), node);
 			return -ENOMEM;
-- 
2.43.0

[Intel-wired-lan] [PATCH AUTOSEL 6.10 019/197] e1000e: avoid failing the system during pm_suspend

[Sasha Levin]

From: Vitaly Lifshits <vitaly.lifshits@intel.com>

[ Upstream commit 0a6ad4d9e1690c7faa3a53f762c877e477093657 ]

Occasionally when the system goes into pm_suspend, the suspend might fail
due to a PHY access error on the network adapter. Previously, this would
have caused the whole system to fail to go to a low power state.
An example of this was reported in the following Bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=205015

[ 1663.694828] e1000e 0000:00:19.0 eth0: Failed to disable ULP
[ 1664.731040] asix 2-3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ 1665.093513] e1000e 0000:00:19.0 eth0: Hardware Error
[ 1665.596760] e1000e 0000:00:19.0: pci_pm_resume+0x0/0x80 returned 0 after 2975399 usecs

and then the system never recovers from it, and all the following suspend failed due to this
[22909.393854] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x760 [e1000e] returns -2
[22909.393858] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -2
[22909.393861] PM: Device 0000:00:1f.6 failed to suspend async: error -2

This can be avoided by changing the return values of __e1000_shutdown and
e1000e_pm_suspend functions so that they always return 0 (success). This
is consistent with what other drivers do.

If the e1000e driver encounters a hardware error during suspend, potential
side effects include slightly higher power draw or non-working wake on
LAN. This is preferred to a system-level suspend failure, and a warning
message is written to the system log, so that the user can be aware that
the LAN controller experienced a problem during suspend.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205015
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 3cd161c6672be..e23eedc791d66 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6671,8 +6671,10 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 		if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
 			/* enable wakeup by the PHY */
 			retval = e1000_init_phy_wakeup(adapter, wufc);
-			if (retval)
-				return retval;
+			if (retval) {
+				e_err("Failed to enable wakeup\n");
+				goto skip_phy_configurations;
+			}
 		} else {
 			/* enable wakeup by the MAC */
 			ew32(WUFC, wufc);
@@ -6693,8 +6695,10 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 			 * or broadcast.
 			 */
 			retval = e1000_enable_ulp_lpt_lp(hw, !runtime);
-			if (retval)
-				return retval;
+			if (retval) {
+				e_err("Failed to enable ULP\n");
+				goto skip_phy_configurations;
+			}
 		}
 	}
 
@@ -6726,6 +6730,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 		hw->phy.ops.release(hw);
 	}
 
+skip_phy_configurations:
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
@@ -6968,15 +6973,13 @@ static int e1000e_pm_suspend(struct device *dev)
 	e1000e_pm_freeze(dev);
 
 	rc = __e1000_shutdown(pdev, false);
-	if (rc) {
-		e1000e_pm_thaw(dev);
-	} else {
+	if (!rc) {
 		/* Introduce S0ix implementation */
 		if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
 			e1000e_s0ix_entry_flow(adapter);
 	}
 
-	return rc;
+	return 0;
 }
 
 static int e1000e_pm_resume(struct device *dev)
-- 
2.43.0