From: Jacob Keller <jacob.e.keller@intel.com>
To: Intel Wired LAN <intel-wired-lan@lists.osuosl.org>,
Maciej Machnikowski <maciej.machnikowski@intel.com>,
Jacob Keller <jacob.e.keller@intel.com>,
Przemyslaw Korba <przemyslaw.korba@intel.com>,
Anthony Nguyen <anthony.l.nguyen@intel.com>,
Grzegorz Nitka <grzegorz.nitka@intel.com>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>,
Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Przemyslaw Korba <przemyslaw.korba@intel.com>,
Maciek Machnikowski <maciej.machnikowski@intel.com>
Subject: [PATCH iwl-net v3 07/15] ice: E822: cancel offset verification work during reset preparation
Date: Fri, 25 Sep 2026 16:56:39 -0700 [thread overview]
Message-ID: <20260925-jk-e825c-timestamp-processing-logic-fixes-srcu-v3-7-6532598e8da8@intel.com> (raw)
In-Reply-To: <20260925-jk-e825c-timestamp-processing-logic-fixes-srcu-v3-0-6532598e8da8@intel.com>
From: Karol Kolacinski <karol.kolacinski@intel.com>
The offset verification work task for E822 is executed after a PHY restart
to complete vernier calibration. In the event that either Tx or Rx
calibration hasn't finished, it may still be executing when a reset occurs.
A single PF reset does not trigger a PHY restart, but larger resets (CORE,
GLOBAL, EMP) will initiate a PHY restart.
The ice_ptp_wait_for_offsets() function does check if the driver is
resetting, and will reschedule itself. However, it is possible that a given
execution is already past this check. The function may then fail to access
the sideband queue. It treats failures as a reason to re-schedule and check
again later. This re-schedule will then see the updated reset state via
ice_is_reset_in_progress() and will keep re-scheduling until the reset
finishes.
The larger resets will restart the PHY, canceling any outstanding vernier
calibration and forcing a restart. Preemptively cancel the task for non-PF
resets to avoid doing unnecessary checks while resetting. The task is not
canceled for a PF reset, otherwise nothing would restart the task to finish
vernier calibration after the reset.
Fixes: 95af1f1c4c9f ("ice: reschedule ice_ptp_wait_for_offset_valid during reset")
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Reviewed-by: Maciek Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
---
drivers/net/ethernet/intel/ice/ice_ptp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index 7f82439c47ee..7cc151b01a13 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -3006,6 +3006,9 @@ void ice_ptp_prepare_for_reset(struct ice_pf *pf, enum ice_reset_req reset_type)
if (reset_type == ICE_RESET_PFR)
return;
+ if (hw->mac_type == ICE_MAC_GENERIC)
+ kthread_cancel_delayed_work_sync(&ptp->port.ov_work);
+
if (ice_pf_src_tmr_owned(pf) && hw->mac_type == ICE_MAC_GENERIC_3K_E825)
ice_ptp_prepare_rebuild_sec(pf, false, reset_type);
--
2.56.0.rc0.395.gd1f3524e15dc
next prev parent reply other threads:[~2026-09-25 23:58 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-25 23:56 [PATCH iwl-net v3 00/15] ice: E82x: timestamp processing logic fixes Jacob Keller
2026-09-25 23:56 ` [PATCH iwl-net v3 01/15] ice: fix removal of PTP timestamp tracker during reset Jacob Keller
2026-10-05 11:02 ` Loktionov, Aleksandr
2026-10-06 1:36 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 02/15] ice: use reference counting and SRCU for PTP port access Jacob Keller
2026-10-06 1:37 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 03/15] ice: fix PHY port restart serialization Jacob Keller
2026-10-06 1:38 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 04/15] ice: set in_use only after preparing Tx timestamp index Jacob Keller
2026-10-06 1:38 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 05/15] ice: call PTP link change only from link events Jacob Keller
2026-09-25 23:56 ` [PATCH iwl-net v3 06/15] ice: E822: keep Tx timestamps disabled during offset calibration Jacob Keller
2026-10-06 1:39 ` Nowlin, Alexander
2026-09-25 23:56 ` Jacob Keller [this message]
2026-10-06 1:40 ` [PATCH iwl-net v3 07/15] ice: E822: cancel offset verification work during reset preparation Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 08/15] ice: E825: stop clearing PHY_REG_TX_OFFSET_READY Jacob Keller
2026-10-05 11:03 ` Loktionov, Aleksandr
2026-10-06 1:41 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 09/15] ice: E825: clear PHY_REG_TX_MEMORY_STATUS prior to soft reset Jacob Keller
2026-10-05 11:04 ` Loktionov, Aleksandr
2026-10-06 1:41 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 10/15] ice: E825: perform a soft reset when starting the PHY timer Jacob Keller
2026-10-05 11:04 ` Loktionov, Aleksandr
2026-10-06 1:42 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 11/15] ice: wait for in-flight Tx timestamps before flushing the tracker Jacob Keller
2026-10-05 11:05 ` Loktionov, Aleksandr
2026-10-06 1:42 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 12/15] ice: keep Tx timestamp slots tracked until completion or timeout Jacob Keller
2026-10-05 11:01 ` Loktionov, Aleksandr
2026-10-06 1:43 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 13/15] ice: skip reading Tx ready bitmap on ports with no timestamps Jacob Keller
2026-10-06 1:44 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 14/15] ice: don't clear in_use until HW clears ready bitmap Jacob Keller
2026-10-06 1:45 ` Nowlin, Alexander
2026-09-25 23:56 ` [PATCH iwl-net v3 15/15] ice: Recalibrate PHY after settime64 on E825-C Jacob Keller
2026-10-06 1:46 ` Nowlin, Alexander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260925-jk-e825c-timestamp-processing-logic-fixes-srcu-v3-7-6532598e8da8@intel.com \
--to=jacob.e.keller@intel.com \
--cc=aleksandr.loktionov@intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=arkadiusz.kubalewski@intel.com \
--cc=grzegorz.nitka@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=maciej.machnikowski@intel.com \
--cc=przemyslaw.korba@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox