* [Intel-wired-lan] [PATCH net-next v2] igc: Add qbv_config_change_errors counter
@ 2022-12-15 22:52 Muhammad Husaini Zulkifli
2023-01-01 11:15 ` naamax.meir
0 siblings, 1 reply; 2+ messages in thread
From: Muhammad Husaini Zulkifli @ 2022-12-15 22:52 UTC (permalink / raw)
To: intel-wired-lan, vinicius.gomes
Cc: muhammad.husaini.zulkifli, anthony.l.nguyen
Add ConfigChangeError(qbv_config_change_errors) when user try to set the
AdminBaseTime to past value while the current GCL is still running.
The ConfigChangeError counter should not be increased when a gate control
list is scheduled into the future.
User can use "ethtool -S <interface> | grep qbv_config_change_errors"
command to check the counter values.
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
---
V1 -> V2: Fix wrong tree applied
---
---
drivers/net/ethernet/intel/igc/igc.h | 1 +
drivers/net/ethernet/intel/igc/igc_ethtool.c | 1 +
drivers/net/ethernet/intel/igc/igc_main.c | 1 +
drivers/net/ethernet/intel/igc/igc_tsn.c | 6 ++++++
4 files changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/intel/igc/igc.h b/drivers/net/ethernet/intel/igc/igc.h
index 5da8d162cd38..9db93c1f9767 100644
--- a/drivers/net/ethernet/intel/igc/igc.h
+++ b/drivers/net/ethernet/intel/igc/igc.h
@@ -185,6 +185,7 @@ struct igc_adapter {
ktime_t base_time;
ktime_t cycle_time;
bool qbv_enable;
+ u32 qbv_config_change_errors;
/* OS defined structs */
struct pci_dev *pdev;
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 5a26a7805ef8..0e2cb00622d1 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -67,6 +67,7 @@ static const struct igc_stats igc_gstrings_stats[] = {
IGC_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
IGC_STAT("tx_lpi_counter", stats.tlpic),
IGC_STAT("rx_lpi_counter", stats.rlpic),
+ IGC_STAT("qbv_config_change_errors", qbv_config_change_errors),
};
#define IGC_NETDEV_STAT(_net_stat) { \
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index fdb7f0b26ed0..4947b0f308cd 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6012,6 +6012,7 @@ static int igc_tsn_clear_schedule(struct igc_adapter *adapter)
adapter->base_time = 0;
adapter->cycle_time = NSEC_PER_SEC;
+ adapter->qbv_config_change_errors = 0;
for (i = 0; i < adapter->num_tx_queues; i++) {
struct igc_ring *ring = adapter->tx_ring[i];
diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c
index b03c6168bd23..a6b963839741 100644
--- a/drivers/net/ethernet/intel/igc/igc_tsn.c
+++ b/drivers/net/ethernet/intel/igc/igc_tsn.c
@@ -239,6 +239,12 @@ static int igc_tsn_enable_offload(struct igc_adapter *adapter)
s64 n = div64_s64(ktime_sub_ns(systim, base_time), cycle);
base_time = ktime_add_ns(base_time, (n + 1) * cycle);
+
+ /* Increase the counter if scheduling into the past while
+ * Gate Control List (GCL) is running.
+ */
+ if (rd32(IGC_BASET_H) || rd32(IGC_BASET_L))
+ adapter->qbv_config_change_errors++;
} else {
/* According to datasheet section 7.5.2.9.3.3, FutScdDis bit
* has to be configured before the cycle time and base time.
--
2.17.1
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [Intel-wired-lan] [PATCH net-next v2] igc: Add qbv_config_change_errors counter
2022-12-15 22:52 [Intel-wired-lan] [PATCH net-next v2] igc: Add qbv_config_change_errors counter Muhammad Husaini Zulkifli
@ 2023-01-01 11:15 ` naamax.meir
0 siblings, 0 replies; 2+ messages in thread
From: naamax.meir @ 2023-01-01 11:15 UTC (permalink / raw)
To: Muhammad Husaini Zulkifli, intel-wired-lan, vinicius.gomes
Cc: anthony.l.nguyen
On 12/16/2022 00:52, Muhammad Husaini Zulkifli wrote:
> Add ConfigChangeError(qbv_config_change_errors) when user try to set the
> AdminBaseTime to past value while the current GCL is still running.
>
> The ConfigChangeError counter should not be increased when a gate control
> list is scheduled into the future.
>
> User can use "ethtool -S <interface> | grep qbv_config_change_errors"
> command to check the counter values.
>
> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
>
> ---
> V1 -> V2: Fix wrong tree applied
> ---
> ---
> drivers/net/ethernet/intel/igc/igc.h | 1 +
> drivers/net/ethernet/intel/igc/igc_ethtool.c | 1 +
> drivers/net/ethernet/intel/igc/igc_main.c | 1 +
> drivers/net/ethernet/intel/igc/igc_tsn.c | 6 ++++++
> 4 files changed, 9 insertions(+)
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
_______________________________________________
Intel-wired-lan mailing list
Intel-wired-lan@osuosl.org
https://lists.osuosl.org/mailman/listinfo/intel-wired-lan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-01-01 11:15 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-12-15 22:52 [Intel-wired-lan] [PATCH net-next v2] igc: Add qbv_config_change_errors counter Muhammad Husaini Zulkifli
2023-01-01 11:15 ` naamax.meir
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox