Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Subject: [PATCH v2 8/9] drm/i915: Cleanup fbdev fb setup
Date: Fri, 10 May 2024 13:22:57 +0300	[thread overview]
Message-ID: <20240510102257.25096-1-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20240506125718.26001-9-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

We use a mix of 'intel_fb' vs. 'ifbdev->fb' in the same function.
Both should be pointing at the same thing. Make things less
confusing by just getting existing fb from 'ifbdev->fb' at the
start and then sticking with the local 'fb' (renamed from the
'intel_fb') until the very end.

v2: rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_fbdev.c | 38 ++++++++++++----------
 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_fbdev.c b/drivers/gpu/drm/i915/display/intel_fbdev.c
index 4bbbf481bb3a..e898018ab76a 100644
--- a/drivers/gpu/drm/i915/display/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/display/intel_fbdev.c
@@ -175,7 +175,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
 			  struct drm_fb_helper_surface_size *sizes)
 {
 	struct intel_fbdev *ifbdev = to_intel_fbdev(helper);
-	struct intel_framebuffer *intel_fb = ifbdev->fb;
+	struct intel_framebuffer *fb = ifbdev->fb;
 	struct drm_device *dev = helper->dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	const struct i915_gtt_view view = {
@@ -195,29 +195,30 @@ static int intelfb_create(struct drm_fb_helper *helper,
 	if (ret)
 		return ret;
 
-	if (intel_fb &&
-	    (sizes->fb_width > intel_fb->base.width ||
-	     sizes->fb_height > intel_fb->base.height)) {
+	ifbdev->fb = NULL;
+
+	if (fb &&
+	    (sizes->fb_width > fb->base.width ||
+	     sizes->fb_height > fb->base.height)) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "BIOS fb too small (%dx%d), we require (%dx%d),"
 			    " releasing it\n",
-			    intel_fb->base.width, intel_fb->base.height,
+			    fb->base.width, fb->base.height,
 			    sizes->fb_width, sizes->fb_height);
-		drm_framebuffer_put(&intel_fb->base);
-		intel_fb = ifbdev->fb = NULL;
+		drm_framebuffer_put(&fb->base);
+		fb = NULL;
 	}
-	if (!intel_fb || drm_WARN_ON(dev, !intel_fb_obj(&intel_fb->base))) {
+	if (!fb || drm_WARN_ON(dev, !intel_fb_obj(&fb->base))) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "no BIOS fb, allocating a new one\n");
-		intel_fb = intel_fbdev_fb_alloc(helper, sizes);
-		if (IS_ERR(intel_fb))
-			return PTR_ERR(intel_fb);
-		ifbdev->fb = intel_fb;
+		fb = intel_fbdev_fb_alloc(helper, sizes);
+		if (IS_ERR(fb))
+			return PTR_ERR(fb);
 	} else {
 		drm_dbg_kms(&dev_priv->drm, "re-using BIOS fb\n");
 		prealloc = true;
-		sizes->fb_width = intel_fb->base.width;
-		sizes->fb_height = intel_fb->base.height;
+		sizes->fb_width = fb->base.width;
+		sizes->fb_height = fb->base.height;
 	}
 
 	wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);
@@ -226,7 +227,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
 	 * This also validates that any existing fb inherited from the
 	 * BIOS is suitable for own access.
 	 */
-	vma = intel_pin_and_fence_fb_obj(&ifbdev->fb->base, false,
+	vma = intel_pin_and_fence_fb_obj(&fb->base, false,
 					 &view, false, &flags);
 	if (IS_ERR(vma)) {
 		ret = PTR_ERR(vma);
@@ -240,11 +241,11 @@ static int intelfb_create(struct drm_fb_helper *helper,
 		goto out_unpin;
 	}
 
-	ifbdev->helper.fb = &ifbdev->fb->base;
+	ifbdev->helper.fb = &fb->base;
 
 	info->fbops = &intelfb_ops;
 
-	obj = intel_fb_obj(&intel_fb->base);
+	obj = intel_fb_obj(&fb->base);
 
 	ret = intel_fbdev_fb_fill_info(dev_priv, info, obj, vma);
 	if (ret)
@@ -262,8 +263,9 @@ static int intelfb_create(struct drm_fb_helper *helper,
 	/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
 
 	drm_dbg_kms(&dev_priv->drm, "allocated %dx%d fb: 0x%08x\n",
-		    ifbdev->fb->base.width, ifbdev->fb->base.height,
+		    fb->base.width, fb->base.height,
 		    i915_ggtt_offset(vma));
+	ifbdev->fb = fb;
 	ifbdev->vma = vma;
 	ifbdev->vma_flags = flags;
 
-- 
2.43.2


  reply	other threads:[~2024-05-10 10:23 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-06 12:57 [PATCH 0/9] drm/i915: Plane fb refactoring Ville Syrjala
2024-05-06 12:57 ` [PATCH 1/9] drm/i915: Split gen2 vs. gen3 .max_stride() Ville Syrjala
2024-05-06 13:57   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 2/9] drm/i915: Clean up skl+ plane stride limits Ville Syrjala
2024-05-06 14:03   ` Jani Nikula
2024-05-06 16:38     ` Ville Syrjälä
2024-05-07  9:02       ` Jani Nikula
2024-05-06 12:57 ` [PATCH 3/9] drm/i915: Drop 'uses_fence' parameter from intel_pin_fb_obj_dpt() Ville Syrjala
2024-05-06 14:04   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 4/9] drm/i915: Extract intel_plane_needs_physical() Ville Syrjala
2024-05-06 14:05   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 5/9] drm/i915: Polish types in fb calculations Ville Syrjala
2024-05-06 14:07   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 6/9] drm/i915: Constify 'fb' in during pinning Ville Syrjala
2024-05-06 14:11   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 7/9] drm/i915: Change intel_fbdev_fb_alloc() reuturn type Ville Syrjala
2024-05-06 14:16   ` Jani Nikula
2024-05-06 16:51     ` Ville Syrjälä
2024-05-06 18:19       ` Ville Syrjälä
2024-05-10 10:22   ` [PATCH v2 7/9] drm/i915: Change intel_fbdev_fb_alloc() return type Ville Syrjala
2024-05-10 11:30     ` Jani Nikula
2024-05-06 12:57 ` [PATCH 8/9] drm/i915: Cleanup fbdev fb setup Ville Syrjala
2024-05-10 10:22   ` Ville Syrjala [this message]
2024-05-10 11:32     ` [PATCH v2 " Jani Nikula
2024-05-06 12:57 ` [PATCH 9/9] drm/i915: Rename the fb pinning functions to indicate the address space Ville Syrjala
2024-05-10 11:35   ` Jani Nikula
2024-05-06 13:02 ` ✓ CI.Patch_applied: success for drm/i915: Plane fb refactoring Patchwork
2024-05-06 13:03 ` ✓ CI.checkpatch: " Patchwork
2024-05-06 13:03 ` ✓ CI.KUnit: " Patchwork
2024-05-06 13:15 ` ✓ CI.Build: " Patchwork
2024-05-06 13:18 ` ✓ CI.Hooks: " Patchwork
2024-05-06 13:19 ` ✗ CI.checksparse: warning " Patchwork
2024-05-06 13:53 ` ✓ CI.BAT: success " Patchwork
2024-05-06 15:07 ` ✓ CI.FULL: " Patchwork
2024-05-10 10:52 ` ✓ CI.Patch_applied: success for drm/i915: Plane fb refactoring (rev3) Patchwork
2024-05-10 10:53 ` ✓ CI.checkpatch: " Patchwork
2024-05-10 10:55 ` ✓ CI.KUnit: " Patchwork
2024-05-10 11:07 ` ✓ CI.Build: " Patchwork
2024-05-10 11:10 ` ✓ CI.Hooks: " Patchwork
2024-05-10 11:11 ` ✗ CI.checksparse: warning " Patchwork
2024-05-10 11:43 ` ✗ CI.BAT: failure " Patchwork
2024-05-10 13:54 ` ✓ CI.FULL: success " Patchwork
2024-05-10 16:55 ` [PATCH 0/9] drm/i915: Plane fb refactoring Ville Syrjälä
2024-05-11 19:00   ` Lucas De Marchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240510102257.25096-1-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox