From: Vinod Govindapillai <vinod.govindapillai@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org, vinod.govindapillai@intel.com,
ville.syrjala@linux.intel.com, santhosh.reddy.guddati@intel.com,
jani.saarinen@intel.com
Subject: [PATCH v9 2/8] drm/i915/display: update and store the plane damage clips
Date: Thu, 20 Feb 2025 12:41:38 +0200 [thread overview]
Message-ID: <20250220104144.207526-3-vinod.govindapillai@intel.com> (raw)
In-Reply-To: <20250220104144.207526-1-vinod.govindapillai@intel.com>
Userspace can pass damage area clips per plane to track
changes in a plane and some display components can utilze
these damage clips for efficiently handling use cases like
FBC, PSR etc. A merged damage area is generated and its
coordinates are updated relative to viewport and HW and
stored in the plane_state. This merged damage areas will be
used for FBC dirty rect support in xe3 in the follow-up
patch.
Big thanks to Ville Syrjala for his contribuitions in shaping
up of this series.
v1: - Move damage_merged helper to cover bigjoiner case and use
the correct plane state for damage find helper (Ville)
- Damage handling code under HAS_FBC_DIRTY_RECT() so the
the related part will be executed only for xe3+
- Changed dev_priv to i915 in one of the functions
v2: - damage reported is stored in the plane state after coords
adjustmentments irrespective of fbc dirty rect support.
- Damage to be empty in case of plane not visible (Ville)
- Handle fb could be NULL and plane not visible cases (Ville)
v3: - No need to empty damage in case disp ver < 12 (Ville)
- update to the patch subject
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
---
.../gpu/drm/i915/display/intel_atomic_plane.c | 29 ++++++++++++
.../drm/i915/display/intel_display_types.h | 2 +
.../drm/i915/display/skl_universal_plane.c | 46 ++++++++++++++++++-
3 files changed, 76 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
index 124cd9ddba0b..e4774c43183b 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
@@ -36,6 +36,7 @@
#include <drm/drm_atomic_helper.h>
#include <drm/drm_blend.h>
+#include <drm/drm_damage_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_gem.h>
#include <drm/drm_gem_atomic_helper.h>
@@ -131,6 +132,7 @@ intel_plane_duplicate_state(struct drm_plane *plane)
intel_state->ggtt_vma = NULL;
intel_state->dpt_vma = NULL;
intel_state->flags = 0;
+ intel_state->damage = DRM_RECT_INIT(0, 0, 0, 0);
/* add reference to fb */
if (intel_state->hw.fb)
@@ -336,6 +338,25 @@ static void intel_plane_clear_hw_state(struct intel_plane_state *plane_state)
memset(&plane_state->hw, 0, sizeof(plane_state->hw));
}
+static void
+intel_plane_copy_uapi_plane_damage(struct intel_plane_state *new_plane_state,
+ const struct intel_plane_state *old_uapi_plane_state,
+ const struct intel_plane_state *new_uapi_plane_state)
+{
+ struct intel_display *display = to_intel_display(new_plane_state);
+ struct drm_rect *damage = &new_plane_state->damage;
+
+ /* damage property tracking enabled from display version 12 onwards */
+ if (DISPLAY_VER(display) < 12)
+ return;
+
+ if (!drm_atomic_helper_damage_merged(&old_uapi_plane_state->uapi,
+ &new_uapi_plane_state->uapi,
+ damage))
+ /* Incase helper fails, mark whole plane region as damage */
+ *damage = drm_plane_state_src(&new_uapi_plane_state->uapi);
+}
+
void intel_plane_copy_uapi_to_hw_state(struct intel_plane_state *plane_state,
const struct intel_plane_state *from_plane_state,
struct intel_crtc *crtc)
@@ -705,6 +726,7 @@ int intel_plane_atomic_check(struct intel_atomic_state *state,
const struct intel_plane_state *old_plane_state =
intel_atomic_get_old_plane_state(state, plane);
const struct intel_plane_state *new_primary_crtc_plane_state;
+ const struct intel_plane_state *old_primary_crtc_plane_state;
struct intel_crtc *crtc = intel_crtc_for_pipe(display, plane->pipe);
const struct intel_crtc_state *old_crtc_state =
intel_atomic_get_old_crtc_state(state, crtc);
@@ -719,10 +741,17 @@ int intel_plane_atomic_check(struct intel_atomic_state *state,
new_primary_crtc_plane_state =
intel_atomic_get_new_plane_state(state, primary_crtc_plane);
+ old_primary_crtc_plane_state =
+ intel_atomic_get_old_plane_state(state, primary_crtc_plane);
} else {
new_primary_crtc_plane_state = new_plane_state;
+ old_primary_crtc_plane_state = old_plane_state;
}
+ intel_plane_copy_uapi_plane_damage(new_plane_state,
+ old_primary_crtc_plane_state,
+ new_primary_crtc_plane_state);
+
intel_plane_copy_uapi_to_hw_state(new_plane_state,
new_primary_crtc_plane_state,
crtc);
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index a4e3f33f75eb..50bd9f1332c0 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -690,6 +690,8 @@ struct intel_plane_state {
u64 ccval;
const char *no_fbc_reason;
+
+ struct drm_rect damage;
};
struct intel_initial_plane_config {
diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
index cd9762947f1d..920faf98e10b 100644
--- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
+++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
@@ -2270,6 +2270,44 @@ static void check_protection(struct intel_plane_state *plane_state)
!plane_state->decrypt;
}
+static void
+make_damage_viewport_relative(struct intel_plane_state *plane_state)
+{
+ const struct drm_framebuffer *fb = plane_state->hw.fb;
+ const struct drm_rect *src = &plane_state->uapi.src;
+ unsigned int rotation = plane_state->hw.rotation;
+ struct drm_rect *damage = &plane_state->damage;
+
+ if (!drm_rect_visible(damage))
+ return;
+
+ if (!fb || !plane_state->uapi.visible) {
+ plane_state->damage = DRM_RECT_INIT(0, 0, 0, 0);
+ return;
+ }
+
+ if (drm_rotation_90_or_270(rotation)) {
+ drm_rect_rotate(damage, fb->width, fb->height,
+ DRM_MODE_ROTATE_270);
+ drm_rect_translate(damage, -(src->y1 >> 16), -(src->x1 >> 16));
+ } else {
+ drm_rect_translate(damage, -(src->x1 >> 16), -(src->y1 >> 16));
+ }
+}
+
+static void clip_damage(struct intel_plane_state *plane_state)
+{
+ struct drm_rect *damage = &plane_state->damage;
+ struct drm_rect src;
+
+ if (!drm_rect_visible(damage))
+ return;
+
+ drm_rect_fp_to_int(&src, &plane_state->uapi.src);
+ drm_rect_translate(damage, src.x1, src.y1);
+ drm_rect_intersect(damage, &src);
+}
+
static int skl_plane_check(struct intel_crtc_state *crtc_state,
struct intel_plane_state *plane_state)
{
@@ -2295,6 +2333,8 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
if (ret)
return ret;
+ make_damage_viewport_relative(plane_state);
+
ret = skl_check_plane_surface(plane_state);
if (ret)
return ret;
@@ -2310,6 +2350,8 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
if (ret)
return ret;
+ clip_damage(plane_state);
+
ret = skl_plane_check_nv12_rotation(plane_state);
if (ret)
return ret;
@@ -2317,8 +2359,10 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
check_protection(plane_state);
/* HW only has 8 bits pixel precision, disable plane if invisible */
- if (!(plane_state->hw.alpha >> 8))
+ if (!(plane_state->hw.alpha >> 8)) {
plane_state->uapi.visible = false;
+ plane_state->damage = DRM_RECT_INIT(0, 0, 0, 0);
+ }
plane_state->ctl = skl_plane_ctl(crtc_state, plane_state);
--
2.43.0
next prev parent reply other threads:[~2025-02-20 10:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-20 10:41 [PATCH v9 0/8] drm/i915/fbc: FBC Dirty rect feature support Vinod Govindapillai
2025-02-20 10:41 ` [PATCH v9 1/8] drm/damage-helper: add const qualifier in drm_atomic_helper_damage_merged() Vinod Govindapillai
2025-02-20 10:41 ` Vinod Govindapillai [this message]
2025-02-20 10:41 ` [PATCH v9 3/8] drm/i915/fbc: add register definitions for fbc dirty rect support Vinod Govindapillai
2025-02-20 10:41 ` [PATCH v9 4/8] drm/i915/fbc: introduce HAS_FBC_DIRTY_RECT() for FBC " Vinod Govindapillai
2025-02-20 10:41 ` [PATCH v9 5/8] drm/i915/fbc: avoid calling fbc activate if fbc is active Vinod Govindapillai
2025-02-20 10:41 ` [PATCH v9 6/8] drm/i915/fbc: dirty rect support for FBC Vinod Govindapillai
2025-02-20 10:41 ` [PATCH v9 7/8] drm/i915/fbc: disable FBC if PSR2 selective fetch is enabled Vinod Govindapillai
2025-02-20 10:41 ` [PATCH v9 8/8] drm/i915/fbc: handle dirty rect coords for the first frame Vinod Govindapillai
2025-02-21 17:54 ` Ville Syrjälä
2025-02-20 10:47 ` ✓ CI.Patch_applied: success for drm/i915/fbc: FBC Dirty rect feature support (rev3) Patchwork
2025-02-20 10:47 ` ✗ CI.checkpatch: warning " Patchwork
2025-02-20 10:49 ` ✓ CI.KUnit: success " Patchwork
2025-02-20 11:05 ` ✓ CI.Build: " Patchwork
2025-02-20 11:07 ` ✓ CI.Hooks: " Patchwork
2025-02-20 11:09 ` ✗ CI.checksparse: warning " Patchwork
2025-02-20 11:29 ` ✓ Xe.CI.BAT: success " Patchwork
2025-02-21 5:13 ` ✗ Xe.CI.Full: failure " Patchwork
2025-02-21 7:45 ` Govindapillai, Vinod
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250220104144.207526-3-vinod.govindapillai@intel.com \
--to=vinod.govindapillai@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.saarinen@intel.com \
--cc=santhosh.reddy.guddati@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox