From: Maarten Lankhorst <dev@lankhorst.se>
To: intel-xe@lists.freedesktop.org
Cc: Maarten Lankhorst <dev@lankhorst.se>
Subject: [CI 07/13] drm/xe/display: Convert GGTT mapping to use pte_encode_flags
Date: Fri, 4 Apr 2025 22:51:32 +0200 [thread overview]
Message-ID: <20250404205138.620455-8-dev@lankhorst.se> (raw)
In-Reply-To: <20250404205138.620455-1-dev@lankhorst.se>
Another small step in removing pte_encode_bo callback.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
---
drivers/gpu/drm/xe/display/xe_fb_pin.c | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/xe/display/xe_fb_pin.c b/drivers/gpu/drm/xe/display/xe_fb_pin.c
index 5392e46a3a134..9059b56bc23c8 100644
--- a/drivers/gpu/drm/xe/display/xe_fb_pin.c
+++ b/drivers/gpu/drm/xe/display/xe_fb_pin.c
@@ -171,15 +171,15 @@ write_ggtt_rotated(struct xe_bo *bo, struct xe_ggtt *ggtt, u32 *ggtt_ofs, u32 bo
{
struct xe_device *xe = xe_bo_device(bo);
u32 column, row;
+ u64 pte = ggtt->pt_ops->pte_encode_flags(bo, xe->pat.idx[XE_CACHE_NONE]);
for (column = 0; column < width; column++) {
u32 src_idx = src_stride * (height - 1) + column + bo_ofs;
for (row = 0; row < height; row++) {
- u64 pte = ggtt->pt_ops->pte_encode_bo(bo, src_idx * XE_PAGE_SIZE,
- xe->pat.idx[XE_CACHE_NONE]);
+ u64 addr = xe_bo_addr(bo, src_idx * XE_PAGE_SIZE, XE_PAGE_SIZE);
- ggtt->pt_ops->ggtt_set_pte(ggtt, *ggtt_ofs, pte);
+ ggtt->pt_ops->ggtt_set_pte(ggtt, *ggtt_ofs, pte | addr);
*ggtt_ofs += XE_PAGE_SIZE;
src_idx -= src_stride;
}
@@ -217,26 +217,19 @@ static int __xe_pin_fb_vma_ggtt(const struct intel_framebuffer *fb,
if (bo->ggtt_node[tile0->id] && view->type == I915_GTT_VIEW_NORMAL) {
vma->node = bo->ggtt_node[tile0->id];
} else if (view->type == I915_GTT_VIEW_NORMAL) {
- u32 x, size = bo->ttm.base.size;
-
vma->node = xe_ggtt_node_init(ggtt);
if (IS_ERR(vma->node)) {
ret = PTR_ERR(vma->node);
goto out_unlock;
}
- ret = xe_ggtt_node_insert_locked(vma->node, size, align, 0);
+ ret = xe_ggtt_node_insert_locked(vma->node, bo->size, align, 0);
if (ret) {
xe_ggtt_node_fini(vma->node);
goto out_unlock;
}
- for (x = 0; x < size; x += XE_PAGE_SIZE) {
- u64 pte = ggtt->pt_ops->pte_encode_bo(bo, x,
- xe->pat.idx[XE_CACHE_NONE]);
-
- ggtt->pt_ops->ggtt_set_pte(ggtt, vma->node->base.start + x, pte);
- }
+ xe_ggtt_map_bo(ggtt, vma->node, bo, xe->pat.idx[XE_CACHE_NONE]);
} else {
u32 i, ggtt_ofs;
const struct intel_rotation_info *rot_info = &view->rotated;
--
2.45.2
next prev parent reply other threads:[~2025-04-04 20:51 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-04 20:51 [CI 00/13] Offload GGTT binding to migration engine Maarten Lankhorst
2025-04-04 20:51 ` [CI 01/13] drm/xe: Use xe_ggtt_map_bo_unlocked for resume Maarten Lankhorst
2025-04-04 20:51 ` [CI 02/13] drm/xe: Add xe_ggtt_might_lock Maarten Lankhorst
2025-04-04 20:51 ` [CI 03/13] drm/xe: Add xe_ggtt_alloc Maarten Lankhorst
2025-04-04 20:51 ` [CI 04/13] drm/xe/display: Remove dereferences of ggtt for tile id Maarten Lankhorst
2025-04-04 20:51 ` [CI 05/13] drm/xe/ggtt: Seperate flags and address in PTE encoding Maarten Lankhorst
2025-04-04 20:51 ` [CI 06/13] drm/xe/display: Dont poke into GGTT internals to fill a DPT Maarten Lankhorst
2025-04-04 20:51 ` Maarten Lankhorst [this message]
2025-04-04 20:51 ` [CI 08/13] drm/xe: Remove pte_encode_bo callback Maarten Lankhorst
2025-04-04 20:51 ` [CI 09/13] drm/xe: Implement a helper for reading out a GGTT PTE at a specified offset Maarten Lankhorst
2025-04-04 20:51 ` [CI 10/13] drm/xe: Add GGTT updates to migration engine Maarten Lankhorst
2025-04-04 20:51 ` [CI 11/13] drm/xe: Convert xe_fb_pin to use a callback for insertion into GGTT Maarten Lankhorst
2025-04-04 20:51 ` [CI 12/13] drm/xe: Allow for optimization of xe_ggtt_map_bo Maarten Lankhorst
2025-04-04 20:51 ` [CI 13/13] drm/xe: Move struct xe_ggtt to xe_ggtt.c Maarten Lankhorst
2025-04-04 22:20 ` ✓ CI.Patch_applied: success for Offload GGTT binding to migration engine Patchwork
2025-04-04 22:20 ` ✗ CI.checkpatch: warning " Patchwork
2025-04-04 22:21 ` ✗ CI.KUnit: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250404205138.620455-8-dev@lankhorst.se \
--to=dev@lankhorst.se \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox