From: Matthew Brost <matthew.brost@intel.com>
To: intel-xe@lists.freedesktop.org
Subject: [PATCH v4 01/34] drm/xe: Add NULL checks to scratch LRC allocation
Date: Wed, 1 Oct 2025 22:53:29 -0700 [thread overview]
Message-ID: <20251002055402.1865880-2-matthew.brost@intel.com> (raw)
In-Reply-To: <20251002055402.1865880-1-matthew.brost@intel.com>
kmalloc can fail, the returned value must have a NULL check. This should
be immediately after kmalloc for clarity.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
---
drivers/gpu/drm/xe/xe_lrc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/xe/xe_lrc.c b/drivers/gpu/drm/xe/xe_lrc.c
index 47e9df775072..e1bc102a6cae 100644
--- a/drivers/gpu/drm/xe/xe_lrc.c
+++ b/drivers/gpu/drm/xe/xe_lrc.c
@@ -1303,8 +1303,11 @@ static int setup_wa_bb(struct xe_lrc *lrc, struct xe_hw_engine *hwe)
u32 *buf = NULL;
int ret;
- if (lrc->bo->vmap.is_iomem)
+ if (lrc->bo->vmap.is_iomem) {
buf = kmalloc(LRC_WA_BB_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ }
ret = xe_lrc_setup_wa_bb_with_scratch(lrc, hwe, buf);
@@ -1347,8 +1350,11 @@ setup_indirect_ctx(struct xe_lrc *lrc, struct xe_hw_engine *hwe)
if (xe_gt_WARN_ON(lrc->gt, !state.funcs))
return 0;
- if (lrc->bo->vmap.is_iomem)
+ if (lrc->bo->vmap.is_iomem) {
state.buffer = kmalloc(state.max_size, GFP_KERNEL);
+ if (!state.buffer)
+ return -ENOMEM;
+ }
ret = setup_bo(&state);
if (ret) {
--
2.34.1
next prev parent reply other threads:[~2025-10-02 5:54 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-02 5:53 [PATCH v4 00/34] VF migration redesign Matthew Brost
2025-10-02 5:53 ` Matthew Brost [this message]
2025-10-02 22:02 ` [PATCH v4 01/34] drm/xe: Add NULL checks to scratch LRC allocation Lis, Tomasz
2025-10-02 5:53 ` [PATCH v4 02/34] Revert "drm/xe/vf: Rebase exec queue parallel commands during migration recovery" Matthew Brost
2025-10-02 5:53 ` [PATCH v4 03/34] Revert "drm/xe/vf: Post migration, repopulate ring area for pending request" Matthew Brost
2025-10-02 5:53 ` [PATCH v4 04/34] Revert "drm/xe/vf: Fixup CTB send buffer messages after migration" Matthew Brost
2025-10-02 5:53 ` [PATCH v4 05/34] drm/xe: Save off position in ring in which a job was programmed Matthew Brost
2025-10-02 5:53 ` [PATCH v4 06/34] drm/xe/guc: Track pending-enable source in submission state Matthew Brost
2025-10-02 5:53 ` [PATCH v4 07/34] drm/xe: Track LR jobs in DRM scheduler pending list Matthew Brost
2025-10-02 16:14 ` Matthew Auld
2025-10-05 5:21 ` Matthew Brost
2025-10-02 5:53 ` [PATCH v4 08/34] drm/xe: Don't change LRC ring head on job resubmission Matthew Brost
2025-10-02 14:15 ` Matthew Auld
2025-10-05 5:25 ` Matthew Brost
2025-10-05 6:53 ` Matthew Brost
2025-10-06 8:59 ` Matthew Auld
2025-10-02 5:53 ` [PATCH v4 09/34] drm/xe: Make LRC W/A scratch buffer usage consistent Matthew Brost
2025-10-02 5:53 ` [PATCH v4 10/34] drm/xe/guc: Document GuC submission backend Matthew Brost
2025-10-03 14:30 ` Lis, Tomasz
2025-10-02 5:53 ` [PATCH v4 11/34] drm/xe/vf: Add xe_gt_recovery_inprogress helper Matthew Brost
2025-10-03 1:39 ` Lis, Tomasz
2025-10-04 4:32 ` Matthew Brost
2025-10-03 8:40 ` Michal Wajdeczko
2025-10-04 4:32 ` Matthew Brost
2025-10-02 5:53 ` [PATCH v4 12/34] drm/xe/vf: Make VF recovery run on per-GT worker Matthew Brost
2025-10-02 5:53 ` [PATCH v4 13/34] drm/xe/vf: Abort H2G sends during VF post-migration recovery Matthew Brost
2025-10-02 5:53 ` [PATCH v4 14/34] drm/xe/vf: Remove memory allocations from VF post migration recovery Matthew Brost
2025-10-02 5:53 ` [PATCH v4 15/34] drm/xe/vf: Close multi-GT GGTT shift race Matthew Brost
2025-10-03 14:24 ` Michal Wajdeczko
2025-10-04 4:36 ` Matthew Brost
2025-10-02 5:53 ` [PATCH v4 16/34] drm/xe/vf: Teardown VF post migration worker on driver unload Matthew Brost
2025-10-02 5:53 ` [PATCH v4 17/34] drm/xe/vf: Don't allow GT reset to be queued during VF post migration recovery Matthew Brost
2025-10-03 16:09 ` Lis, Tomasz
2025-10-02 5:53 ` [PATCH v4 18/34] drm/xe/vf: Wakeup in GuC backend on " Matthew Brost
2025-10-03 14:38 ` Michal Wajdeczko
2025-10-05 6:22 ` Matthew Brost
2025-10-05 6:35 ` Matthew Brost
2025-10-02 5:53 ` [PATCH v4 19/34] drm/xe/vf: Avoid indefinite blocking in preempt rebind worker for VFs supporting migration Matthew Brost
2025-10-02 5:53 ` [PATCH v4 20/34] drm/xe/vf: Use GUC_HXG_TYPE_EVENT for GuC context register Matthew Brost
2025-10-03 14:26 ` Lis, Tomasz
2025-10-05 5:43 ` Matthew Brost
2025-10-03 14:57 ` Michal Wajdeczko
2025-10-02 5:53 ` [PATCH v4 21/34] drm/xe/vf: Flush and stop CTs in VF post migration recovery Matthew Brost
2025-10-02 5:53 ` [PATCH v4 22/34] drm/xe/vf: Reset TLB invalidations during " Matthew Brost
2025-10-02 5:53 ` [PATCH v4 23/34] drm/xe/vf: Kickstart after resfix in " Matthew Brost
2025-10-02 5:53 ` [PATCH v4 24/34] drm/xe/vf: Start CTs before resfix " Matthew Brost
2025-10-02 21:50 ` Lis, Tomasz
2025-10-03 15:10 ` Michal Wajdeczko
2025-10-05 6:49 ` Matthew Brost
2025-10-05 12:28 ` Michal Wajdeczko
2025-10-02 5:53 ` [PATCH v4 25/34] drm/xe/vf: Abort VF post migration recovery on failure Matthew Brost
2025-10-02 5:53 ` [PATCH v4 26/34] drm/xe/vf: Replay GuC submission state on pause / unpause Matthew Brost
2025-10-02 5:53 ` [PATCH v4 27/34] drm/xe: Move queue init before LRC creation Matthew Brost
2025-10-03 13:25 ` Lis, Tomasz
2025-10-05 8:03 ` Matthew Brost
2025-10-02 5:53 ` [PATCH v4 28/34] drm/xe/vf: Add debug prints for GuC replaying state during VF recovery Matthew Brost
2025-10-03 13:08 ` Lis, Tomasz
2025-10-02 5:53 ` [PATCH v4 29/34] drm/xe/vf: Workaround for race condition in GuC firmware during VF pause Matthew Brost
2025-10-03 13:06 ` Lis, Tomasz
2025-10-02 5:53 ` [PATCH v4 30/34] drm/xe: Use PPGTT addresses for TLB invalidation to avoid GGTT fixups Matthew Brost
2025-10-02 5:53 ` [PATCH v4 31/34] drm/xe/vf: Use primary GT ordered work queue on media GT on PTL VF Matthew Brost
2025-10-02 21:00 ` Lis, Tomasz
2025-10-05 7:03 ` Matthew Brost
2025-10-02 5:54 ` [PATCH v4 32/34] drm/xe/vf: Ensure media GT VF recovery runs after primary GT on PTL Matthew Brost
2025-10-02 20:19 ` Lis, Tomasz
2025-10-02 5:54 ` [PATCH v4 33/34] drm/xe/vf: Rebase CCS save/restore BB GGTT addresses Matthew Brost
2025-10-02 5:54 ` [PATCH v4 34/34] drm/xe/guc: Increase wait timeout to 2sec after BUSY reply from GuC Matthew Brost
2025-10-02 6:45 ` ✗ CI.checkpatch: warning for VF migration redesign (rev4) Patchwork
2025-10-02 6:47 ` ✓ CI.KUnit: success " Patchwork
2025-10-02 7:33 ` ✗ Xe.CI.BAT: failure " Patchwork
2025-10-02 9:19 ` ✗ Xe.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251002055402.1865880-2-matthew.brost@intel.com \
--to=matthew.brost@intel.com \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox