From: Mika Kahola <mika.kahola@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: Mika Kahola <mika.kahola@intel.com>, Imre Deak <imre.deak@intel.com>
Subject: [PATCH v2 19/32] drm/i915/cx0: Add MTL+ .get_dplls hook
Date: Mon, 17 Nov 2025 12:45:49 +0200 [thread overview]
Message-ID: <20251117104602.2363671-20-mika.kahola@intel.com> (raw)
In-Reply-To: <20251117104602.2363671-1-mika.kahola@intel.com>
Add .get_dplls function pointer for MTL+ platforms
to support dpll framework. Reuse the ICL function
pointer.
v2: Getting configuration either for a C10 or on the PTL port B
eDP on TypeC PHY case for a C20 PHY PLL. Hence refer to this
case as "non_tc_phy" instead of "c10phy".
v3: Fix comment to "eDP over TypeC" (Suraj)
Fix pll id as separate variable (Suraj)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
---
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 57 +++++++++++++++++++
drivers/gpu/drm/i915/display/intel_dpll_mgr.h | 1 +
2 files changed, 58 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 20f940110faa..313cb244d5d6 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -203,6 +203,22 @@ enum intel_dpll_id icl_tc_port_to_pll_id(enum tc_port tc_port)
return tc_port - TC_PORT_1 + DPLL_ID_ICL_MGPLL1;
}
+enum intel_dpll_id mtl_port_to_pll_id(struct intel_display *display, enum port port)
+{
+ if (port >= PORT_TC1)
+ return icl_tc_port_to_pll_id(intel_port_to_tc(display, port));
+
+ switch (port) {
+ case PORT_A:
+ return DPLL_ID_ICL_DPLL0;
+ case PORT_B:
+ return DPLL_ID_ICL_DPLL1;
+ default:
+ MISSING_CASE(port);
+ return DPLL_ID_ICL_DPLL0;
+ }
+}
+
static i915_reg_t
intel_combo_pll_enable_reg(struct intel_display *display,
struct intel_dpll *pll)
@@ -3490,6 +3506,36 @@ static int icl_get_tc_phy_dplls(struct intel_atomic_state *state,
return ret;
}
+/*
+ * Get the PLL for either a port using a C10 PHY PLL, or in the
+ * PTL port B eDP over TypeC PHY case, the PLL for a port using
+ * a C20 PHY PLL.
+ */
+static int mtl_get_non_tc_phy_dpll(struct intel_atomic_state *state,
+ struct intel_crtc *crtc,
+ struct intel_encoder *encoder)
+{
+ struct intel_display *display = to_intel_display(crtc);
+ struct intel_crtc_state *crtc_state =
+ intel_atomic_get_new_crtc_state(state, crtc);
+ struct icl_port_dpll *port_dpll =
+ &crtc_state->icl_port_dplls[ICL_PORT_DPLL_DEFAULT];
+ enum intel_dpll_id pll_id = mtl_port_to_pll_id(display, encoder->port);
+
+ port_dpll->pll = intel_find_dpll(state, crtc,
+ &port_dpll->hw_state,
+ BIT(pll_id));
+ if (!port_dpll->pll)
+ return -EINVAL;
+
+ intel_reference_dpll(state, crtc,
+ port_dpll->pll, &port_dpll->hw_state);
+
+ icl_update_active_dpll(state, crtc, encoder);
+
+ return 0;
+}
+
static int icl_compute_dplls(struct intel_atomic_state *state,
struct intel_crtc *crtc,
struct intel_encoder *encoder)
@@ -4387,10 +4433,21 @@ static int mtl_compute_dplls(struct intel_atomic_state *state,
return mtl_compute_non_tc_phy_dpll(state, crtc, encoder);
}
+static int mtl_get_dplls(struct intel_atomic_state *state,
+ struct intel_crtc *crtc,
+ struct intel_encoder *encoder)
+{
+ if (intel_encoder_is_tc(encoder))
+ return icl_get_tc_phy_dplls(state, crtc, encoder);
+ else
+ return mtl_get_non_tc_phy_dpll(state, crtc, encoder);
+}
+
__maybe_unused
static const struct intel_dpll_mgr mtl_pll_mgr = {
.dpll_info = mtl_plls,
.compute_dplls = mtl_compute_dplls,
+ .get_dplls = mtl_get_dplls,
};
/**
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.h b/drivers/gpu/drm/i915/display/intel_dpll_mgr.h
index a7946ff13cb6..322af5c55d7c 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.h
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.h
@@ -450,6 +450,7 @@ bool intel_dpll_compare_hw_state(struct intel_display *display,
const struct intel_dpll_hw_state *a,
const struct intel_dpll_hw_state *b);
enum intel_dpll_id icl_tc_port_to_pll_id(enum tc_port tc_port);
+enum intel_dpll_id mtl_port_to_pll_id(struct intel_display *display, enum port port);
bool intel_dpll_is_combophy(enum intel_dpll_id id);
void intel_dpll_state_verify(struct intel_atomic_state *state,
--
2.34.1
next prev parent reply other threads:[~2025-11-17 10:59 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-17 10:45 [PATCH v2 00/32] drm/i915/cx0: Add MTL+ platforms to support dpll framework Mika Kahola
2025-11-17 10:45 ` [PATCH v2 01/32] drm/i915/cx0: Rename TBT functions to be ICL specific Mika Kahola
2025-11-17 10:45 ` [PATCH v2 02/32] drm/i915/cx0: Factor out C10 msgbus access start/end helpers Mika Kahola
2025-11-17 10:45 ` [PATCH v2 03/32] drm/i915/cx0: Sanitize setting the Cx0 PLL use_c10 flag Mika Kahola
2025-11-17 10:45 ` [PATCH v2 04/32] drm/i915/cx0: Sanitize calculating C20 PLL state from tables Mika Kahola
2025-11-17 10:45 ` [PATCH v2 05/32] drm/i915/cx0: Track the C20 PHY VDR state in the PLL state Mika Kahola
2025-11-18 3:43 ` Kandpal, Suraj
2025-11-17 10:45 ` [PATCH v2 06/32] drm/i915/cx0: Move definition of Cx0 PHY functions earlier Mika Kahola
2025-11-17 10:45 ` [PATCH v2 07/32] drm/i915/cx0: Add macro to get DDI port width from a register value Mika Kahola
2025-11-17 10:45 ` [PATCH v2 08/32] drm/i915/cx0: Track the Cx0 PHY enabled lane count in the PLL state Mika Kahola
2025-11-17 10:45 ` [PATCH v2 09/32] drm/i915/cx0: Sanitize C10 PHY PLL SSC register setup Mika Kahola
2025-11-17 10:45 ` [PATCH v2 10/32] drm/i915/cx0: Read out the Cx0 PHY SSC enabled state Mika Kahola
2025-11-17 10:45 ` [PATCH v2 11/32] drm/i915/cx0: Determine Cx0 PLL DP mode from PLL state Mika Kahola
2025-11-17 10:45 ` [PATCH v2 12/32] drm/i915/cx0: Determine Cx0 PLL port clock " Mika Kahola
2025-11-17 10:45 ` [PATCH v2 13/32] drm/i915/cx0: Zero Cx0 PLL state before compute and HW readout Mika Kahola
2025-11-17 10:45 ` [PATCH v2 14/32] drm/i915/cx0: Print additional Cx0 PLL HW state Mika Kahola
2025-11-18 3:49 ` Kandpal, Suraj
2025-11-17 10:45 ` [PATCH v2 15/32] drm/i915/cx0: Remove state verification Mika Kahola
2025-11-17 10:45 ` [PATCH v2 16/32] drm/i915/cx0: Add PLL information for MTL+ Mika Kahola
2025-11-18 3:56 ` Kandpal, Suraj
2025-11-17 10:45 ` [PATCH v2 17/32] drm/i915/cx0: Update C10/C20 state calculation Mika Kahola
2025-11-18 4:00 ` Kandpal, Suraj
2025-11-17 10:45 ` [PATCH v2 18/32] drm/i915/cx0: Compute plls for MTL+ platform Mika Kahola
2025-11-18 4:03 ` Kandpal, Suraj
2025-11-18 9:14 ` Kahola, Mika
2025-11-17 10:45 ` Mika Kahola [this message]
2025-11-18 4:04 ` [PATCH v2 19/32] drm/i915/cx0: Add MTL+ .get_dplls hook Kandpal, Suraj
2025-11-17 10:45 ` [PATCH v2 20/32] drm/i915/cx0: Add MTL+ .put_dplls hook Mika Kahola
2025-11-17 10:45 ` [PATCH v2 21/32] drm/i915/cx0: Add MTL+ .update_active_dpll hook Mika Kahola
2025-11-18 4:21 ` Kandpal, Suraj
2025-11-18 9:46 ` Kahola, Mika
2025-11-18 11:28 ` Kahola, Mika
2025-11-18 13:28 ` [PATCH v3 " Mika Kahola
2025-11-19 5:29 ` Kandpal, Suraj
2025-11-17 10:45 ` [PATCH v2 22/32] drm/i915/cx0: Add MTL+ .update_dpll_ref_clks hook Mika Kahola
2025-11-17 10:45 ` [PATCH v2 23/32] drm/i915/cx0: Add MTL+ .dump_hw_state hook Mika Kahola
2025-11-17 10:45 ` [PATCH v2 24/32] drm/i915/cx0: Add .compare_hw_state hook Mika Kahola
2025-11-17 10:45 ` [PATCH v2 25/32] drm/i915/cx0: Add MTL+ .get_hw_state hook Mika Kahola
2026-04-20 23:19 ` Gustavo Sousa
2026-04-21 7:27 ` Kahola, Mika
2025-11-17 10:45 ` [PATCH v2 26/32] drm/i915/cx0: Add MTL+ .get_freq hook Mika Kahola
2025-11-17 10:45 ` [PATCH v2 27/32] drm/i915/cx0: Add MTL+ .crtc_get_dpll hook Mika Kahola
2025-11-17 10:45 ` [PATCH v2 28/32] drm/i915/cx0: PLL verify debug state print Mika Kahola
2025-11-17 10:45 ` [PATCH v2 29/32] drm/i915/cx0: Add MTL+ .enable_clock/.disable clock hooks on DDI Mika Kahola
2025-11-17 10:46 ` [PATCH v2 30/32] drm/i915/cx0: Get encoder configuration for C10 and C20 PHY PLLs Mika Kahola
2025-11-18 4:33 ` Kandpal, Suraj
2025-11-18 12:02 ` Kahola, Mika
2025-11-19 5:25 ` Kandpal, Suraj
2025-11-17 10:46 ` [PATCH v2 31/32] drm/i915/cx0: Add MTL+ Thunderbolt PLL hooks Mika Kahola
2025-11-18 4:38 ` Kandpal, Suraj
2025-11-18 10:50 ` Imre Deak
2025-11-19 6:03 ` Kandpal, Suraj
2025-11-17 10:46 ` [PATCH v2 32/32] drm/i915/cx0: Enable dpll framework for MTL+ Mika Kahola
2025-11-18 4:14 ` Kandpal, Suraj
2025-11-18 9:20 ` Kahola, Mika
2025-11-18 13:28 ` [PATCH v3 " Mika Kahola
2025-11-19 5:26 ` Kandpal, Suraj
2025-11-17 11:06 ` ✗ CI.checkpatch: warning for drm/i915/cx0: Add MTL+ platforms to support dpll framework Patchwork
2025-11-17 11:07 ` ✓ CI.KUnit: success " Patchwork
2025-11-17 11:22 ` ✗ CI.checksparse: warning " Patchwork
2025-11-17 12:09 ` ✓ Xe.CI.BAT: success " Patchwork
2025-11-17 13:29 ` ✗ Xe.CI.Full: failure " Patchwork
2025-11-18 17:17 ` ✗ CI.checkpatch: warning for drm/i915/cx0: Add MTL+ platforms to support dpll framework (rev3) Patchwork
2025-11-18 17:18 ` ✓ CI.KUnit: success " Patchwork
2025-11-18 17:33 ` ✗ CI.checksparse: warning " Patchwork
2025-11-18 17:58 ` ✓ Xe.CI.BAT: success " Patchwork
2025-11-19 11:59 ` [PATCH v2 00/32] drm/i915/cx0: Add MTL+ platforms to support dpll framework Kahola, Mika
2025-11-19 18:12 ` Matt Roper
2025-11-20 12:41 ` Kahola, Mika
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251117104602.2363671-20-mika.kahola@intel.com \
--to=mika.kahola@intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox