[i915-rt v5 07/21] drm/i915/display: Handle vlv dsi workaround in scanline_in_safe_range too

[Maarten Lankhorst <dev@lankhorst.se>]

Now that we have a macro, might as well handle the VLV dsi workaround
too.

This makes the vblank evasion code slightly more deterministic, by not
looping with interrupts disabled.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
---
 drivers/gpu/drm/i915/display/intel_vblank.c | 36 ++++++++++-----------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_vblank.c b/drivers/gpu/drm/i915/display/intel_vblank.c
index 58c374a7530fe..6bc784563a7c1 100644
--- a/drivers/gpu/drm/i915/display/intel_vblank.c
+++ b/drivers/gpu/drm/i915/display/intel_vblank.c
@@ -739,6 +739,24 @@ static bool scanline_in_safe_range(struct intel_vblank_evade_ctx *evade, int *sc
 	else
 		*scanline = __intel_get_crtc_scanline(evade->crtc);
 
+	/*
+	 * On VLV/CHV DSI the scanline counter would appear to
+	 * increment approx. 1/3 of a scanline before start of vblank.
+	 * The registers still get latched at start of vblank however.
+	 * This means we must not write any registers on the first
+	 * line of vblank (since not the whole line is actually in
+	 * vblank). And unfortunately we can't use the interrupt to
+	 * wait here since it will fire too soon. We could use the
+	 * frame start interrupt instead since it will fire after the
+	 * critical scanline, but that would require more changes
+	 * in the interrupt code. So for now we'll just do the nasty
+	 * thing and poll for the bad scanline to pass us by.
+	 *
+	 * FIXME figure out if BXT+ DSI suffers from this as well
+	 */
+	if (evade->need_vlv_dsi_wa && *scanline == evade->vblank_start)
+		return false;
+
 	return *scanline < evade->min || *scanline > evade->max;
 }
 
@@ -769,24 +787,6 @@ int intel_vblank_evade(struct intel_vblank_evade_ctx *evade)
 		local_irq_disable();
 	}
 
-	/*
-	 * On VLV/CHV DSI the scanline counter would appear to
-	 * increment approx. 1/3 of a scanline before start of vblank.
-	 * The registers still get latched at start of vblank however.
-	 * This means we must not write any registers on the first
-	 * line of vblank (since not the whole line is actually in
-	 * vblank). And unfortunately we can't use the interrupt to
-	 * wait here since it will fire too soon. We could use the
-	 * frame start interrupt instead since it will fire after the
-	 * critical scanline, but that would require more changes
-	 * in the interrupt code. So for now we'll just do the nasty
-	 * thing and poll for the bad scanline to pass us by.
-	 *
-	 * FIXME figure out if BXT+ DSI suffers from this as well
-	 */
-	while (evade->need_vlv_dsi_wa && scanline == evade->vblank_start)
-		scanline = intel_get_crtc_scanline(crtc);
-
 	return scanline;
 }
 
-- 
2.51.0