Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Piotr Piórkowski" <piotr.piorkowski@intel.com>
To: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: <intel-xe@lists.freedesktop.org>
Subject: Re: [PATCH 3/5] drm/xe/configfs: Always return consistent max_vfs value
Date: Wed, 28 Jan 2026 16:51:23 +0100	[thread overview]
Message-ID: <20260128155123.rgbsw67wcr67oofz@intel.com> (raw)
In-Reply-To: <20260121214218.2817-4-michal.wajdeczko@intel.com>

Michal Wajdeczko <michal.wajdeczko@intel.com> wrote on śro [2026-sty-21 22:42:14 +0100]:
> The max_vfs parameter used by the Xe driver has its default value
> definition, but it could be altered by the module parameter or by
> the device specific configfs attribute.
> 
> To avoid mistakes or code duplication, always rely on the configfs
> helper (or stub), which will provide necessary fallback if needed.
> 
> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
> ---
>  drivers/gpu/drm/xe/xe_configfs.c | 3 ++-
>  drivers/gpu/drm/xe/xe_configfs.h | 8 +++++++-
>  drivers/gpu/drm/xe/xe_sriov_pf.c | 4 +---
>  3 files changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/xe/xe_configfs.c b/drivers/gpu/drm/xe/xe_configfs.c
> index 9f6251b1008b..a823b0bd4ebb 100644
> --- a/drivers/gpu/drm/xe/xe_configfs.c
> +++ b/drivers/gpu/drm/xe/xe_configfs.c
> @@ -15,6 +15,7 @@
>  
>  #include "instructions/xe_mi_commands.h"
>  #include "xe_configfs.h"
> +#include "xe_defaults.h"
>  #include "xe_gt_types.h"
>  #include "xe_hw_engine_types.h"
>  #include "xe_module.h"
> @@ -280,7 +281,7 @@ static const struct xe_config_device device_defaults = {
>  	.survivability_mode = false,
>  	.enable_psmi = false,
>  	.sriov = {
> -		.max_vfs = UINT_MAX,
> +		.max_vfs = XE_DEFAULT_MAX_VFS,
>  	},
>  };
>  
> diff --git a/drivers/gpu/drm/xe/xe_configfs.h b/drivers/gpu/drm/xe/xe_configfs.h
> index 510888354a7c..e0a555b871b3 100644
> --- a/drivers/gpu/drm/xe/xe_configfs.h
> +++ b/drivers/gpu/drm/xe/xe_configfs.h
> @@ -9,6 +9,7 @@
>  #include <linux/types.h>
>  
>  #include "xe_hw_engine_types.h"
> +#include "xe_module.h"
>  
>  struct pci_dev;
>  
> @@ -41,7 +42,12 @@ static inline u32 xe_configfs_get_ctx_restore_mid_bb(struct pci_dev *pdev, enum
>  						     const u32 **cs) { return 0; }
>  static inline u32 xe_configfs_get_ctx_restore_post_bb(struct pci_dev *pdev, enum xe_engine_class,
>  						      const u32 **cs) { return 0; }
> -static inline unsigned int xe_configfs_get_max_vfs(struct pci_dev *pdev) { return UINT_MAX; }
> +#ifdef CONFIG_PCI_IOV
> +static inline unsigned int xe_configfs_get_max_vfs(struct pci_dev *pdev)
> +{
> +	return xe_modparam.max_vfs;
> +}
> +#endif
>  #endif
>  
>  #endif
> diff --git a/drivers/gpu/drm/xe/xe_sriov_pf.c b/drivers/gpu/drm/xe/xe_sriov_pf.c
> index 6ce3c58e003c..33bd754d138f 100644
> --- a/drivers/gpu/drm/xe/xe_sriov_pf.c
> +++ b/drivers/gpu/drm/xe/xe_sriov_pf.c
> @@ -22,9 +22,7 @@
>  
>  static unsigned int wanted_max_vfs(struct xe_device *xe)
>  {
> -	if (IS_ENABLED(CONFIG_CONFIGFS_FS))
> -		return xe_configfs_get_max_vfs(to_pci_dev(xe->drm.dev));
> -	return xe_modparam.max_vfs;
> +	return xe_configfs_get_max_vfs(to_pci_dev(xe->drm.dev));
>  }
>  
>  static int pf_reduce_totalvfs(struct xe_device *xe, int limit)

Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>

> -- 
> 2.47.1
> 

-- 

  reply	other threads:[~2026-01-28 15:51 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-21 21:42 [PATCH 0/5] drm/xe/configfs: Add sriov.admin_only_pf attribute Michal Wajdeczko
2026-01-21 21:42 ` [PATCH 1/5] drm/xe: Keep all defaults in single header Michal Wajdeczko
2026-01-23 10:29   ` Piotr Piórkowski
2026-02-03  0:11   ` Rodrigo Vivi
2026-02-03 11:13   ` Jani Nikula
2026-02-03 14:58     ` Michal Wajdeczko
2026-01-21 21:42 ` [PATCH 2/5] drm/xe/configfs: Use proper notation for local include Michal Wajdeczko
2026-01-23 10:29   ` Piotr Piórkowski
2026-01-21 21:42 ` [PATCH 3/5] drm/xe/configfs: Always return consistent max_vfs value Michal Wajdeczko
2026-01-28 15:51   ` Piotr Piórkowski [this message]
2026-01-21 21:42 ` [PATCH 4/5] drm/xe/pf: Define admin_only as real flag Michal Wajdeczko
2026-01-27 21:05   ` [PATCH v2 " Michal Wajdeczko
2026-01-28 15:56     ` Piotr Piórkowski
2026-01-21 21:42 ` [PATCH 5/5] drm/xe/configfs: Add sriov.admin_only_pf attribute Michal Wajdeczko
2026-01-28 16:35   ` Piotr Piórkowski
2026-01-28 23:42     ` Michal Wajdeczko
2026-01-21 22:25 ` ✗ CI.checkpatch: warning for " Patchwork
2026-01-21 22:26 ` ✗ CI.KUnit: failure " Patchwork
2026-01-27 21:34 ` ✗ CI.checkpatch: warning for drm/xe/configfs: Add sriov.admin_only_pf attribute (rev2) Patchwork
2026-01-27 21:35 ` ✓ CI.KUnit: success " Patchwork
2026-01-27 22:33 ` ✓ Xe.CI.BAT: " Patchwork
2026-01-28  6:46 ` ✓ Xe.CI.Full: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260128155123.rgbsw67wcr67oofz@intel.com \
    --to=piotr.piorkowski@intel.com \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=michal.wajdeczko@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox