From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Cc: Imre Deak <imre.deak@gmail.com>
Subject: [PATCH v2 17/20] drm/i915/dp: Check SST link status while handling link service IRQs
Date: Wed, 25 Feb 2026 18:27:48 +0200 [thread overview]
Message-ID: <20260225162751.1255913-18-imre.deak@intel.com> (raw)
In-Reply-To: <20260225162751.1255913-1-imre.deak@intel.com>
From: Imre Deak <imre.deak@gmail.com>
Move checking the link status for SST to
intel_dp_handle_link_service_irq(). This is the logical place for the
check which should only happen in response to a LINK_STATUS_CHANGE sink
IRQ. This IRQ is only supported by DPCD revision >= 1.2, so for sinks
with an older DPCD revision the link status is checked in response to
any HPD IRQ. For newer DPCD revisions however the link status check can
be made conditional on LINK_STATUS_CHANGE.
For now keep the current behavior of always forcing a link status check
regardless of LINK_STATUS_CHANGE being set or not.
This also prepares for a follow-up change sharing the link service IRQ
handler for SST and MST (on MST the link status check only happening in
response to a LINK_STATUS_CHANGE IRQ).
Signed-off-by: Imre Deak <imre.deak@gmail.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index a3bcc5de37442..826d3d63c43ff 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5860,6 +5860,9 @@ static bool intel_dp_handle_link_service_irq(struct intel_dp *intel_dp, u8 irq_m
if (irq_mask & RX_CAP_CHANGED)
reprobe_needed = true;
+ if (irq_mask & LINK_STATUS_CHANGED)
+ intel_dp_check_link_state(intel_dp);
+
if (irq_mask & HDMI_LINK_STATUS_CHANGED)
intel_dp_handle_hdmi_link_status_change(intel_dp);
@@ -5913,14 +5916,18 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
intel_dp_handle_device_service_irq(intel_dp, esi[1]);
+ /*
+ * Force checking the link status for DPCD_REV < 1.2
+ * TODO: let the link status check depend on LINK_STATUS_CHANGED
+ * for DPCD_REV >= 1.2
+ */
+ esi[3] |= LINK_STATUS_CHANGED;
if (intel_dp_handle_link_service_irq(intel_dp, esi[3]))
reprobe_needed = true;
/* Handle CEC interrupts, if any */
drm_dp_cec_irq(&intel_dp->aux);
- intel_dp_check_link_state(intel_dp);
-
if (READ_ONCE(intel_dp->downstream_port_changed)) {
WRITE_ONCE(intel_dp->downstream_port_changed, false);
reprobe_needed = true;
--
2.49.1
next prev parent reply other threads:[~2026-02-25 16:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 16:27 [PATCH v2 00/20] drm/i915/dp: Fix few SST HPD IRQ handling issues Imre Deak
2026-02-25 16:27 ` [PATCH v2 01/20] drm/i915/dp_mst: Reprobe connector if the IRQ ESI read failed Imre Deak
2026-02-25 16:27 ` [PATCH v2 02/20] drm/i915/dp_mst: Verify the link status always the same way Imre Deak
2026-02-25 16:27 ` [PATCH v2 03/20] drm/i915/dp_mst: Reuse intel_dp_check_link_state() in the HPD IRQ handler Imre Deak
2026-02-25 16:27 ` [PATCH v2 04/20] drm/i915/dp: Handle a tunneling IRQ after acking it Imre Deak
2026-02-25 16:27 ` [PATCH v2 05/20] drm/i915/dp: Handle the RX_CAP_CHANGED HPD IRQ Imre Deak
2026-02-25 16:27 ` [PATCH v2 06/20] drm/i915/dp: Handle the DOWNSTREAM_PORT_STATUS_CHANGED event Imre Deak
2026-02-25 16:27 ` [PATCH v2 07/20] drm/i915/dp: Don't clobber the encoder state in the HPD IRQ handler Imre Deak
2026-02-25 16:27 ` [PATCH v2 08/20] drm/i915/dp: Remove the device service IRQ handling from connector detect Imre Deak
2026-02-25 16:27 ` [PATCH v2 09/20] drm/i915/dp: Fix the device service IRQ DPCD_REV check Imre Deak
2026-02-25 16:27 ` [PATCH v2 10/20] drm/i915/dp: Fix the link " Imre Deak
2026-02-25 16:27 ` [PATCH v2 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails Imre Deak
2026-02-25 16:27 ` [PATCH v2 12/20] drm/i915/dp: Reprobe connector if getting/acking link service " Imre Deak
2026-02-25 16:27 ` [PATCH v2 13/20] drm/i915/dp: Return early if getting/acking device " Imre Deak
2026-02-25 16:27 ` [PATCH v2 14/20] drm/i915/dp: Return early if getting/acking link " Imre Deak
2026-02-25 16:27 ` [PATCH v2 15/20] drm/i915/dp: Read/ack sink count and sink IRQs for SST as it's done for MST Imre Deak
2026-02-25 16:27 ` [PATCH v2 16/20] drm/i915/dp: Print debug message for a sink connected off request Imre Deak
2026-02-25 16:27 ` Imre Deak [this message]
2026-02-25 16:27 ` [PATCH v2 18/20] drm/i915/dp_mst: Reuse intel_dp_handle_link_service_irq() Imre Deak
2026-02-25 16:27 ` [PATCH v2 19/20] drm/i915/dp: Ack only the handled device service IRQs Imre Deak
2026-02-25 16:27 ` [PATCH v2 20/20] drm/i915/dp: Ack only the handled link " Imre Deak
2026-02-25 16:34 ` [PATCH v2 00/20] drm/i915/dp: Fix few SST HPD IRQ handling issues Imre Deak
2026-02-25 16:52 ` ✓ CI.KUnit: success for drm/i915/dp: Fix few SST HPD IRQ handling issues (rev2) Patchwork
2026-02-25 17:26 ` ✓ Xe.CI.BAT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225162751.1255913-18-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=imre.deak@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox