Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Cc: Imre Deak <imre.deak@gmail.com>
Subject: [PATCH v2 06/20] drm/i915/dp: Handle the DOWNSTREAM_PORT_STATUS_CHANGED event
Date: Wed, 25 Feb 2026 18:27:37 +0200	[thread overview]
Message-ID: <20260225162751.1255913-7-imre.deak@intel.com> (raw)
In-Reply-To: <20260225162751.1255913-1-imre.deak@intel.com>

From: Imre Deak <imre.deak@gmail.com>

Handle the DOWNSTREAM_PORT_STATUS_CHANGED event a branch device can use
to indicate the state change of a DFP connector on the branch device.
The event is signaled in the DP_LANE_ALIGN_STATUS_UPDATED DPCD register
setting a clear-on-read flag and triggering an HPD IRQ. Accordingly keep
a cached version of the flag, updating it whenever
DP_LANE_ALIGN_STATUS_UPDATED is read. Schedule a full connector
detection from the HPD IRQ handler if the cached flag is set and clear
the cached flag at the start of detection.

Signed-off-by: Imre Deak <imre.deak@gmail.com>
---
 .../gpu/drm/i915/display/intel_display_types.h   |  1 +
 drivers/gpu/drm/i915/display/intel_dp.c          | 16 +++++++++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index e8e4af03a6a6c..126682ecabec9 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1796,6 +1796,7 @@ struct intel_dp {
 	int link_rate;
 	u8 lane_count;
 	u8 sink_count;
+	bool downstream_port_changed;
 	bool needs_modeset_retry;
 	bool use_max_params;
 	u8 dpcd[DP_RECEIVER_CAP_SIZE];
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index f38913834644d..25e14bc0f5b9e 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5543,7 +5543,14 @@ intel_dp_read_link_status(struct intel_dp *intel_dp, u8 link_status[DP_LINK_STAT
 		ret = drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX,
 						       link_status) == 0;
 
-	return ret;
+	if (!ret)
+		return false;
+
+	if (link_status[DP_LANE_ALIGN_STATUS_UPDATED - DP_LANE0_1_STATUS] &
+	    DP_DOWNSTREAM_PORT_STATUS_CHANGED)
+		WRITE_ONCE(intel_dp->downstream_port_changed, true);
+
+	return true;
 }
 
 static bool
@@ -5863,6 +5870,11 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
 
 	intel_dp_check_link_state(intel_dp);
 
+	if (READ_ONCE(intel_dp->downstream_port_changed)) {
+		WRITE_ONCE(intel_dp->downstream_port_changed, false);
+		reprobe_needed = true;
+	}
+
 	intel_psr_short_pulse(intel_dp);
 
 	if (intel_alpm_get_error(intel_dp)) {
@@ -5888,6 +5900,8 @@ intel_dp_detect_dpcd(struct intel_dp *intel_dp)
 	if (drm_WARN_ON(display->drm, intel_dp_is_edp(intel_dp)))
 		return connector_status_connected;
 
+	WRITE_ONCE(intel_dp->downstream_port_changed, false);
+
 	intel_lspcon_resume(dig_port);
 
 	if (!intel_dp_get_dpcd(intel_dp))
-- 
2.49.1


  parent reply	other threads:[~2026-02-25 16:28 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-25 16:27 [PATCH v2 00/20] drm/i915/dp: Fix few SST HPD IRQ handling issues Imre Deak
2026-02-25 16:27 ` [PATCH v2 01/20] drm/i915/dp_mst: Reprobe connector if the IRQ ESI read failed Imre Deak
2026-02-25 16:27 ` [PATCH v2 02/20] drm/i915/dp_mst: Verify the link status always the same way Imre Deak
2026-02-25 16:27 ` [PATCH v2 03/20] drm/i915/dp_mst: Reuse intel_dp_check_link_state() in the HPD IRQ handler Imre Deak
2026-02-25 16:27 ` [PATCH v2 04/20] drm/i915/dp: Handle a tunneling IRQ after acking it Imre Deak
2026-02-25 16:27 ` [PATCH v2 05/20] drm/i915/dp: Handle the RX_CAP_CHANGED HPD IRQ Imre Deak
2026-02-25 16:27 ` Imre Deak [this message]
2026-02-25 16:27 ` [PATCH v2 07/20] drm/i915/dp: Don't clobber the encoder state in the HPD IRQ handler Imre Deak
2026-02-25 16:27 ` [PATCH v2 08/20] drm/i915/dp: Remove the device service IRQ handling from connector detect Imre Deak
2026-02-25 16:27 ` [PATCH v2 09/20] drm/i915/dp: Fix the device service IRQ DPCD_REV check Imre Deak
2026-02-25 16:27 ` [PATCH v2 10/20] drm/i915/dp: Fix the link " Imre Deak
2026-02-25 16:27 ` [PATCH v2 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails Imre Deak
2026-02-25 16:27 ` [PATCH v2 12/20] drm/i915/dp: Reprobe connector if getting/acking link service " Imre Deak
2026-02-25 16:27 ` [PATCH v2 13/20] drm/i915/dp: Return early if getting/acking device " Imre Deak
2026-02-25 16:27 ` [PATCH v2 14/20] drm/i915/dp: Return early if getting/acking link " Imre Deak
2026-02-25 16:27 ` [PATCH v2 15/20] drm/i915/dp: Read/ack sink count and sink IRQs for SST as it's done for MST Imre Deak
2026-02-25 16:27 ` [PATCH v2 16/20] drm/i915/dp: Print debug message for a sink connected off request Imre Deak
2026-02-25 16:27 ` [PATCH v2 17/20] drm/i915/dp: Check SST link status while handling link service IRQs Imre Deak
2026-02-25 16:27 ` [PATCH v2 18/20] drm/i915/dp_mst: Reuse intel_dp_handle_link_service_irq() Imre Deak
2026-02-25 16:27 ` [PATCH v2 19/20] drm/i915/dp: Ack only the handled device service IRQs Imre Deak
2026-02-25 16:27 ` [PATCH v2 20/20] drm/i915/dp: Ack only the handled link " Imre Deak
2026-02-25 16:34 ` [PATCH v2 00/20] drm/i915/dp: Fix few SST HPD IRQ handling issues Imre Deak
2026-02-25 16:52 ` ✓ CI.KUnit: success for drm/i915/dp: Fix few SST HPD IRQ handling issues (rev2) Patchwork
2026-02-25 17:26 ` ✓ Xe.CI.BAT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260225162751.1255913-7-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=imre.deak@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox