From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Subject: [PATCH v3 07/20] drm/i915/dp: Don't clobber the encoder state in the HPD IRQ handler
Date: Wed, 25 Feb 2026 18:46:05 +0200 [thread overview]
Message-ID: <20260225164618.1261368-8-imre.deak@intel.com> (raw)
In-Reply-To: <20260225164618.1261368-1-imre.deak@intel.com>
The intel_dp_get_dpcd() function called from an HPD IRQ handler reads
out the DPRX capabilities from the sink and updates these in the
intel_dp encoder state. Since the IRQ handler can run in parallel with
the encoder/connector detection (intel_dp_detect()) which also calls
intel_dp_get_dpcd(), the encoder state can get corrupted, since the two
updates happen in a racy way.
Fix the above by checking only for any change in the sink count value in
the HPD IRQ handler, without updating the encoder state.
Note that any state change in the sink requiring an update of the
encoder state is handled via the sink's SINK_COUNT change,
RX_CAPS_CHANGED, DOWNSTREAM_PORT_STATUS_CHANGED signaling, which all
should result in a full connector detection.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index f7f02ce5d1a77..acef106b041ea 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5843,9 +5843,7 @@ static bool intel_dp_check_link_service_irq(struct intel_dp *intel_dp)
static bool
intel_dp_short_pulse(struct intel_dp *intel_dp)
{
- u8 old_sink_count = intel_dp->sink_count;
bool reprobe_needed = false;
- bool ret;
intel_dp_test_reset(intel_dp);
@@ -5855,12 +5853,10 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
* the value that was stored earlier or dpcd read failed
* we need to do full detection
*/
- ret = intel_dp_get_dpcd(intel_dp);
-
- if ((old_sink_count != intel_dp->sink_count) || !ret) {
+ if (intel_dp_has_sink_count(intel_dp) &&
+ drm_dp_read_sink_count(&intel_dp->aux) != intel_dp->sink_count)
/* No need to proceed if we are going to do full detect */
return false;
- }
intel_dp_check_device_service_irq(intel_dp);
reprobe_needed = intel_dp_check_link_service_irq(intel_dp);
--
2.49.1
next prev parent reply other threads:[~2026-02-25 16:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 16:45 [PATCH v3 00/20] drm/i915/dp: Fix few SST HPD IRQ handling issues Imre Deak
2026-02-25 16:45 ` [PATCH v3 01/20] drm/i915/dp_mst: Reprobe connector if the IRQ ESI read failed Imre Deak
2026-02-25 16:46 ` [PATCH v3 02/20] drm/i915/dp_mst: Verify the link status always the same way Imre Deak
2026-02-25 16:46 ` [PATCH v3 03/20] drm/i915/dp_mst: Reuse intel_dp_check_link_state() in the HPD IRQ handler Imre Deak
2026-02-25 16:46 ` [PATCH v3 04/20] drm/i915/dp: Handle a tunneling IRQ after acking it Imre Deak
2026-02-25 16:46 ` [PATCH v3 05/20] drm/i915/dp: Handle the RX_CAP_CHANGED HPD IRQ Imre Deak
2026-02-25 16:46 ` [PATCH v3 06/20] drm/i915/dp: Handle the DOWNSTREAM_PORT_STATUS_CHANGED event Imre Deak
2026-02-25 16:46 ` Imre Deak [this message]
2026-02-25 16:46 ` [PATCH v3 08/20] drm/i915/dp: Remove the device service IRQ handling from connector detect Imre Deak
2026-02-25 16:46 ` [PATCH v3 09/20] drm/i915/dp: Fix the device service IRQ DPCD_REV check Imre Deak
2026-02-25 16:46 ` [PATCH v3 10/20] drm/i915/dp: Fix the link " Imre Deak
2026-02-25 16:46 ` [PATCH v3 11/20] drm/i915/dp: Reprobe connector if getting/acking device IRQs fails Imre Deak
2026-02-25 16:46 ` [PATCH v3 12/20] drm/i915/dp: Reprobe connector if getting/acking link service " Imre Deak
2026-02-25 16:46 ` [PATCH v3 13/20] drm/i915/dp: Return early if getting/acking device " Imre Deak
2026-02-25 16:46 ` [PATCH v3 14/20] drm/i915/dp: Return early if getting/ackink link " Imre Deak
2026-02-25 16:46 ` [PATCH v3 15/20] drm/i915/dp: Read/ack sink count and sink IRQs for SST as it's done for MST Imre Deak
2026-02-25 16:46 ` [PATCH v3 16/20] drm/i915/dp: Print debug message for a sink connected off request Imre Deak
2026-02-25 16:46 ` [PATCH v3 17/20] drm/i915/dp: Check SST link status while handling link service IRQs Imre Deak
2026-02-25 16:46 ` [PATCH v3 18/20] drm/i915/dp_mst: Reuse intel_dp_handle_link_service_irq() Imre Deak
2026-02-25 16:46 ` [PATCH v3 19/20] drm/i915/dp: Ack only the handled device service IRQs Imre Deak
2026-02-25 16:46 ` [PATCH v3 20/20] drm/i915/dp: Ack only the handled link " Imre Deak
2026-02-25 17:33 ` ✓ CI.KUnit: success for drm/i915/dp: Fix few SST HPD IRQ handling issues (rev3) Patchwork
2026-02-25 18:13 ` ✓ Xe.CI.BAT: " Patchwork
2026-02-25 20:48 ` ✗ Xe.CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225164618.1261368-8-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=luciano.coelho@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox