From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Subject: [PATCH v2 09/34] drm/i915/dp_link_caps: Re-enable link configurations after sink caps change
Date: Wed, 1 Jul 2026 18:31:38 +0300 [thread overview]
Message-ID: <20260701153204.4124150-10-imre.deak@intel.com> (raw)
In-Reply-To: <20260701153204.4124150-1-imre.deak@intel.com>
Re-enable link configurations after sink capabilities change or the link
got reset before updating the link capabilities (due to an RX_CAP_CHANGED
HPD IRQ for the currently connected sink, or a new sink getting
connected).
This makes resetting the link explicitly by calling
intel_dp_link_caps_reset() subsequently redundant; keep the existing
behavior wrt. this for now, adding only a TODO: to remove the explicit
reset.
While at it add documentation for intel_dp_link_caps_update().
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 8 +++-
.../gpu/drm/i915/display/intel_dp_link_caps.c | 37 +++++++++++++++++--
.../gpu/drm/i915/display/intel_dp_link_caps.h | 3 +-
3 files changed, 43 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 6e3fa6662cbef..23001541283b4 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -701,7 +701,8 @@ static bool intel_dp_set_common_link_params(struct intel_dp *intel_dp)
intel_dp_get_common_rates(intel_dp, common_rates, &num_common_rates);
if (intel_dp_link_caps_update(intel_dp->link.caps,
common_rates, num_common_rates,
- intel_dp_get_max_common_lane_count(intel_dp)))
+ intel_dp_get_max_common_lane_count(intel_dp),
+ intel_dp->reset_link_params))
params_changed = true;
return params_changed;
@@ -3652,6 +3653,11 @@ void intel_dp_set_link_params(struct intel_dp *intel_dp,
void intel_dp_reset_link_params(struct intel_dp *intel_dp)
{
+ /*
+ * TODO: Remove the following reset of link capabilities, as
+ * this isn't needed after intel_dp_link_caps_update(reset=true)
+ * was called.
+ */
intel_dp_link_caps_reset(intel_dp->link.caps);
intel_dp->link.mst_probed_lane_count = 0;
intel_dp->link.mst_probed_rate = 0;
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_caps.c b/drivers/gpu/drm/i915/display/intel_dp_link_caps.c
index 667d2e55cea19..de520bd423d59 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_caps.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_caps.c
@@ -709,14 +709,42 @@ static int link_config_cmp_by_lane_rate(const void *a, const void *b, const void
return lce_a->link_rate_idx - lce_b->link_rate_idx;
}
-/* Return %true if the supported link parameters have changed. */
+/**
+ * intel_dp_link_caps_update - rebuild the supported link configuration state
+ * @link_caps: link capabilities state
+ * @rates: supported common link rates
+ * @num_rates: number of entries in @rates
+ * @max_lane_count: supported maximum lane count
+ * @reset: reset limits and disabled configs
+ *
+ * Rebuild the supported link configuration state from @rates and
+ * @max_lane_count.
+ *
+ * If @reset is %true, reset the maximum link limits to the maximum
+ * supported rate and lane count, and re-enable all configurations.
+ *
+ * This function is called regularly, at least after a sink is connected,
+ * but it may also be called later whenever the sink capabilities may have
+ * changed, for example in response to HPD IRQ / RX_CAP_CHANGED signaling.
+ *
+ * In the Intel driver this function is currently called whenever the
+ * connector detect handler runs, after reading the sink capabilities. This
+ * may change if those capabilities are cached until the sink is
+ * disconnected, or until RX_CAP_CHANGED is signaled. In any case, this
+ * function should be called whenever the sink capabilities were read out
+ * and may have changed.
+ *
+ * Returns:
+ * - %true if the link capabilities have changed, %false otherwise.
+ */
bool intel_dp_link_caps_update(struct intel_dp_link_caps *link_caps,
- const int *rates, int num_rates, int max_lane_count)
+ const int *rates, int num_rates, int max_lane_count,
+ bool reset)
{
struct intel_dp *intel_dp = link_caps->dp;
struct intel_display *display = to_intel_display(intel_dp);
struct intel_dp_link_config_entry *lce;
- bool link_params_changed = false;
+ bool link_params_changed = reset;
int num_common_lane_configs;
int i;
int j;
@@ -778,6 +806,9 @@ bool intel_dp_link_caps_update(struct intel_dp_link_caps *link_caps,
link_config_cmp_by_lane_rate, NULL,
link_caps);
+ if (link_params_changed)
+ reset_max_link_limits_reenable_all(link_caps);
+
return link_params_changed;
}
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_caps.h b/drivers/gpu/drm/i915/display/intel_dp_link_caps.h
index 79aca74ad9eee..dcbde890809bc 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_caps.h
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_caps.h
@@ -147,7 +147,8 @@ bool intel_dp_link_caps_set_max_limits(struct intel_dp_link_caps *link_caps,
void intel_dp_link_caps_reset_max_limits(struct intel_dp_link_caps *link_caps);
bool intel_dp_link_caps_update(struct intel_dp_link_caps *link_caps,
- const int *rates, int num_rates, int max_lane_count);
+ const int *rates, int num_rates, int max_lane_count,
+ bool reset);
void intel_dp_link_caps_reset(struct intel_dp_link_caps *link_caps);
void intel_dp_link_caps_debugfs_add(struct intel_connector *connector);
--
2.49.1
next prev parent reply other threads:[~2026-07-01 15:32 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 15:31 [PATCH v2 00/34] drm/i915/dp_link: Unify modeset/fallback config selection Imre Deak
2026-07-01 15:31 ` [PATCH v2 01/34] drm/i915/doc: Document DP link capabilities Imre Deak
2026-07-02 5:17 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 02/34] drm/i915/dp_link_caps: Factor out helper to get link config by index Imre Deak
2026-07-03 2:55 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 03/34] drm/i915/dp_link_caps: Add support for link rate, lane count iteration orders Imre Deak
2026-07-01 15:31 ` [PATCH v2 04/34] drm/i915/dp_link_caps: Add link configuration iterator Imre Deak
2026-07-01 15:31 ` [PATCH v2 05/34] drm/i915/dp_link_caps: Add helper to get iteration order for a connector Imre Deak
2026-07-01 15:31 ` [PATCH v2 06/34] drm/i915/dp_link_caps: Validate max link limits Imre Deak
2026-07-01 15:31 ` [PATCH v2 07/34] drm/i915/dp_link_caps: Add filter for enabled link configurations Imre Deak
2026-07-01 15:31 ` [PATCH v2 08/34] drm/i915/dp_link_caps: Re-enable link configurations after a link reset Imre Deak
2026-07-01 15:31 ` Imre Deak [this message]
2026-07-01 15:31 ` [PATCH v2 10/34] drm/i915/dp_link_caps: Drop noupdate postfix from max link limit set helpers Imre Deak
2026-07-01 15:31 ` [PATCH v2 11/34] drm/i915/dp_link_caps: Add debugfs entry showing allowed configurations Imre Deak
2026-07-02 10:35 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 12/34] drm/i915/dp: Add link configuration filter for modeset computation Imre Deak
2026-07-02 11:03 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 13/34] drm/i915/dp_link_caps: Add helper to query max BW link configuration Imre Deak
2026-07-02 11:06 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 14/34] drm/i915/dp: Query max BW config via link_caps during mode validation Imre Deak
2026-07-02 11:22 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 15/34] drm/i915/dp_tunnel: Query max BW config via link_caps for BW computation Imre Deak
2026-07-02 11:23 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 16/34] drm/i915/dp_test: Use link caps for compliance link configs Imre Deak
2026-07-02 16:19 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 17/34] drm/i915/dp: Iterate configurations via link_caps for SST non-DSC Imre Deak
2026-07-01 15:31 ` [PATCH v2 18/34] drm/i915/dp: Iterate configurations via link_caps for SST DSC Imre Deak
2026-07-01 15:31 ` [PATCH v2 19/34] drm/i915/dp: Use link caps for eDP DSC config selection Imre Deak
2026-07-01 15:31 ` [PATCH v2 20/34] drm/i915/dp_mst: Use link caps for non-DSC " Imre Deak
2026-07-01 15:31 ` [PATCH v2 21/34] drm/i915/dp_mst: Use link caps for MST DSC " Imre Deak
2026-07-01 15:31 ` [PATCH v2 22/34] drm/i915/dp: Remove min/max link config limits Imre Deak
2026-07-01 15:31 ` [PATCH v2 23/34] drm/i915/dp_link_training: Reset the max link limits in the fallback code Imre Deak
2026-07-01 15:31 ` [PATCH v2 24/34] drm/i915/dp_link_training: Use config iterator for fallback Imre Deak
2026-07-01 15:31 ` [PATCH v2 25/34] drm/i915/dp_link_training: Disable failed config during fallback Imre Deak
2026-07-01 15:31 ` [PATCH v2 26/34] drm/i915/kunit: Enable KUnit tests Imre Deak
2026-07-01 15:31 ` [PATCH v2 27/34] drm/i915/kunit: Add DP link test stub Imre Deak
2026-07-01 15:31 ` [PATCH v2 28/34] drm/xe/kunit: Add display test config Imre Deak
2026-07-01 15:31 ` [PATCH v2 29/34] drm/xe/kunit: Build DP link display tests Imre Deak
2026-07-01 15:31 ` [PATCH v2 30/34] drm/i915/kunit: Setup DP link test context Imre Deak
2026-07-01 15:32 ` [PATCH v2 31/34] drm/i915/kunit: Export link training and caps funcs for testing Imre Deak
2026-07-01 15:32 ` [PATCH v2 32/34] drm/i915/kunit: DP link: add baseline fixed table reference test Imre Deak
2026-07-01 15:32 ` [PATCH v2 33/34] drm/i915/kunit: DP link: add update config tests Imre Deak
2026-07-01 15:32 ` [PATCH v2 34/34] drm/i915/kunit: DP link: add fallback tests Imre Deak
2026-07-01 16:39 ` ✗ CI.checkpatch: warning for drm/i915/dp_link: Unify modeset/fallback config selection Patchwork
2026-07-01 16:40 ` ✓ CI.KUnit: success " Patchwork
2026-07-01 16:59 ` ✗ CI.checksparse: warning " Patchwork
2026-07-01 17:43 ` ✓ Xe.CI.BAT: success " Patchwork
2026-07-02 12:25 ` ✓ Xe.CI.FULL: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260701153204.4124150-10-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox