From: Imre Deak <imre.deak@intel.com>
To: <intel-gfx@lists.freedesktop.org>, <intel-xe@lists.freedesktop.org>
Subject: [PATCH v2 14/34] drm/i915/dp: Query max BW config via link_caps during mode validation
Date: Wed, 1 Jul 2026 18:31:43 +0300 [thread overview]
Message-ID: <20260701153204.4124150-15-imre.deak@intel.com> (raw)
In-Reply-To: <20260701153204.4124150-1-imre.deak@intel.com>
Query the maximum link BW configuration during mode validation and MST
link probing directly from intel_dp_link_caps_get_max_bw_config(),
instead of using the intel_dp_max_link_rate() and
intel_dp_max_lane_count() helpers.
This makes the max BW link config query uniform across mode validation
and TBT BW calculation, and allows unexporting the
intel_dp_max_link_rate()/intel_dp_max_lane_count() helpers.
v2: Use the max BW link configuration, instead of the max link limits.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 10 ++++++----
drivers/gpu/drm/i915/display/intel_dp.h | 2 --
drivers/gpu/drm/i915/display/intel_dp_mst.c | 16 ++++++++++++----
3 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index bc333bc9296b2..b10bbbf0f49bf 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -354,7 +354,7 @@ static int intel_dp_get_max_common_lane_count(struct intel_dp *intel_dp)
return min3(source_max, sink_max, lane_max);
}
-int intel_dp_max_lane_count(struct intel_dp *intel_dp)
+static int intel_dp_max_lane_count(struct intel_dp *intel_dp)
{
struct intel_dp_link_caps *link_caps = intel_dp->link.caps;
struct intel_dp_link_config max_link_limits;
@@ -1331,6 +1331,7 @@ intel_dp_mode_valid_format(struct intel_connector *connector,
struct intel_dp *intel_dp = intel_attached_dp(connector);
enum intel_output_format output_format;
int max_rate, mode_rate, max_lanes, max_link_clock;
+ struct intel_dp_link_config max_bw_config;
u16 dsc_max_compressed_bpp = 0;
enum drm_mode_status status;
bool dsc = false;
@@ -1343,8 +1344,9 @@ intel_dp_mode_valid_format(struct intel_connector *connector,
output_format = intel_dp_output_format(connector, sink_format);
- max_link_clock = intel_dp_max_link_rate(intel_dp);
- max_lanes = intel_dp_max_lane_count(intel_dp);
+ intel_dp_link_caps_get_max_bw_config(intel_dp->link.caps, &max_bw_config);
+ max_link_clock = max_bw_config.rate;
+ max_lanes = max_bw_config.lane_count;
max_rate = intel_dp_max_link_data_rate(intel_dp, max_link_clock, max_lanes);
@@ -1538,7 +1540,7 @@ static void intel_dp_print_rates(struct intel_dp *intel_dp)
intel_dp_link_caps_print_common_rates(intel_dp->link.caps);
}
-int
+static int
intel_dp_max_link_rate(struct intel_dp *intel_dp)
{
struct intel_dp_link_caps *link_caps = intel_dp->link.caps;
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index 13872b8c4975e..9564369ea4852 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -111,8 +111,6 @@ void intel_dp_mst_suspend(struct intel_display *display);
void intel_dp_mst_resume(struct intel_display *display);
int intel_dp_rate_limit_len(const int *rates, int len, int max_rate);
int intel_dp_max_source_lane_count(struct intel_digital_port *dig_port);
-int intel_dp_max_link_rate(struct intel_dp *intel_dp);
-int intel_dp_max_lane_count(struct intel_dp *intel_dp);
int intel_dp_config_required_rate(const struct intel_crtc_state *crtc_state);
int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
int intel_dp_rate_index(const int *rates, int len, int rate);
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index ecc90e8faee11..e113c9e60e67d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -47,6 +47,7 @@
#include "intel_display_wa.h"
#include "intel_dp.h"
#include "intel_dp_hdcp.h"
+#include "intel_dp_link_caps.h"
#include "intel_dp_link_training.h"
#include "intel_dp_mst.h"
#include "intel_dp_test.h"
@@ -1476,6 +1477,7 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
unsigned long bw_overhead_flags =
DRM_DP_BW_OVERHEAD_MST | DRM_DP_BW_OVERHEAD_SSC_REF_CLK;
int min_link_bpp_x16 = fxp_q4_from_int(18);
+ struct intel_dp_link_config max_bw_config;
static bool supports_dsc;
int ret;
bool dsc = false;
@@ -1508,8 +1510,9 @@ mst_connector_mode_valid_ctx(struct drm_connector *_connector,
min_link_bpp_x16 = intel_dp_compute_min_compressed_bpp_x16(connector,
INTEL_OUTPUT_FORMAT_RGB);
- max_link_clock = intel_dp_max_link_rate(intel_dp);
- max_lanes = intel_dp_max_lane_count(intel_dp);
+ intel_dp_link_caps_get_max_bw_config(intel_dp->link.caps, &max_bw_config);
+ max_link_clock = max_bw_config.rate;
+ max_lanes = max_bw_config.lane_count;
max_rate = intel_dp_max_link_data_rate(intel_dp,
max_link_clock, max_lanes);
@@ -2135,14 +2138,19 @@ bool intel_dp_mst_crtc_needs_modeset(struct intel_atomic_state *state,
*/
void intel_dp_mst_prepare_probe(struct intel_dp *intel_dp)
{
- int link_rate = intel_dp_max_link_rate(intel_dp);
- int lane_count = intel_dp_max_lane_count(intel_dp);
+ struct intel_dp_link_config max_bw_config;
+ int link_rate;
+ int lane_count;
u8 rate_select;
u8 link_bw;
if (intel_dp->link.active)
return;
+ intel_dp_link_caps_get_max_bw_config(intel_dp->link.caps, &max_bw_config);
+ link_rate = max_bw_config.rate;
+ lane_count = max_bw_config.lane_count;
+
if (intel_mst_probed_link_params_valid(intel_dp, link_rate, lane_count))
return;
--
2.49.1
next prev parent reply other threads:[~2026-07-01 15:33 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 15:31 [PATCH v2 00/34] drm/i915/dp_link: Unify modeset/fallback config selection Imre Deak
2026-07-01 15:31 ` [PATCH v2 01/34] drm/i915/doc: Document DP link capabilities Imre Deak
2026-07-02 5:17 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 02/34] drm/i915/dp_link_caps: Factor out helper to get link config by index Imre Deak
2026-07-03 2:55 ` Kandpal, Suraj
2026-07-01 15:31 ` [PATCH v2 03/34] drm/i915/dp_link_caps: Add support for link rate, lane count iteration orders Imre Deak
2026-07-01 15:31 ` [PATCH v2 04/34] drm/i915/dp_link_caps: Add link configuration iterator Imre Deak
2026-07-01 15:31 ` [PATCH v2 05/34] drm/i915/dp_link_caps: Add helper to get iteration order for a connector Imre Deak
2026-07-01 15:31 ` [PATCH v2 06/34] drm/i915/dp_link_caps: Validate max link limits Imre Deak
2026-07-01 15:31 ` [PATCH v2 07/34] drm/i915/dp_link_caps: Add filter for enabled link configurations Imre Deak
2026-07-01 15:31 ` [PATCH v2 08/34] drm/i915/dp_link_caps: Re-enable link configurations after a link reset Imre Deak
2026-07-01 15:31 ` [PATCH v2 09/34] drm/i915/dp_link_caps: Re-enable link configurations after sink caps change Imre Deak
2026-07-01 15:31 ` [PATCH v2 10/34] drm/i915/dp_link_caps: Drop noupdate postfix from max link limit set helpers Imre Deak
2026-07-01 15:31 ` [PATCH v2 11/34] drm/i915/dp_link_caps: Add debugfs entry showing allowed configurations Imre Deak
2026-07-02 10:35 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 12/34] drm/i915/dp: Add link configuration filter for modeset computation Imre Deak
2026-07-02 11:03 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 13/34] drm/i915/dp_link_caps: Add helper to query max BW link configuration Imre Deak
2026-07-02 11:06 ` Luca Coelho
2026-07-01 15:31 ` Imre Deak [this message]
2026-07-02 11:22 ` [PATCH v2 14/34] drm/i915/dp: Query max BW config via link_caps during mode validation Luca Coelho
2026-07-01 15:31 ` [PATCH v2 15/34] drm/i915/dp_tunnel: Query max BW config via link_caps for BW computation Imre Deak
2026-07-02 11:23 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 16/34] drm/i915/dp_test: Use link caps for compliance link configs Imre Deak
2026-07-02 16:19 ` Luca Coelho
2026-07-01 15:31 ` [PATCH v2 17/34] drm/i915/dp: Iterate configurations via link_caps for SST non-DSC Imre Deak
2026-07-01 15:31 ` [PATCH v2 18/34] drm/i915/dp: Iterate configurations via link_caps for SST DSC Imre Deak
2026-07-01 15:31 ` [PATCH v2 19/34] drm/i915/dp: Use link caps for eDP DSC config selection Imre Deak
2026-07-01 15:31 ` [PATCH v2 20/34] drm/i915/dp_mst: Use link caps for non-DSC " Imre Deak
2026-07-01 15:31 ` [PATCH v2 21/34] drm/i915/dp_mst: Use link caps for MST DSC " Imre Deak
2026-07-01 15:31 ` [PATCH v2 22/34] drm/i915/dp: Remove min/max link config limits Imre Deak
2026-07-01 15:31 ` [PATCH v2 23/34] drm/i915/dp_link_training: Reset the max link limits in the fallback code Imre Deak
2026-07-01 15:31 ` [PATCH v2 24/34] drm/i915/dp_link_training: Use config iterator for fallback Imre Deak
2026-07-01 15:31 ` [PATCH v2 25/34] drm/i915/dp_link_training: Disable failed config during fallback Imre Deak
2026-07-01 15:31 ` [PATCH v2 26/34] drm/i915/kunit: Enable KUnit tests Imre Deak
2026-07-01 15:31 ` [PATCH v2 27/34] drm/i915/kunit: Add DP link test stub Imre Deak
2026-07-01 15:31 ` [PATCH v2 28/34] drm/xe/kunit: Add display test config Imre Deak
2026-07-01 15:31 ` [PATCH v2 29/34] drm/xe/kunit: Build DP link display tests Imre Deak
2026-07-01 15:31 ` [PATCH v2 30/34] drm/i915/kunit: Setup DP link test context Imre Deak
2026-07-01 15:32 ` [PATCH v2 31/34] drm/i915/kunit: Export link training and caps funcs for testing Imre Deak
2026-07-01 15:32 ` [PATCH v2 32/34] drm/i915/kunit: DP link: add baseline fixed table reference test Imre Deak
2026-07-01 15:32 ` [PATCH v2 33/34] drm/i915/kunit: DP link: add update config tests Imre Deak
2026-07-01 15:32 ` [PATCH v2 34/34] drm/i915/kunit: DP link: add fallback tests Imre Deak
2026-07-01 16:39 ` ✗ CI.checkpatch: warning for drm/i915/dp_link: Unify modeset/fallback config selection Patchwork
2026-07-01 16:40 ` ✓ CI.KUnit: success " Patchwork
2026-07-01 16:59 ` ✗ CI.checksparse: warning " Patchwork
2026-07-01 17:43 ` ✓ Xe.CI.BAT: success " Patchwork
2026-07-02 12:25 ` ✓ Xe.CI.FULL: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260701153204.4124150-15-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox