Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
	jouni.hogander@intel.com
Subject: Re: [PATCH 2/5] drm/i915/dp: Allow AS_SDP only if panel replay + auxless alpm is supported
Date: Thu, 30 Oct 2025 10:23:32 +0200	[thread overview]
Message-ID: <aQMghHM7AJAU6m0m@intel.com> (raw)
In-Reply-To: <20251030051755.3071648-3-ankit.k.nautiyal@intel.com>

On Thu, Oct 30, 2025 at 10:47:52AM +0530, Ankit Nautiyal wrote:
> Adaptive Sync SDP is required when Panel replay is active and for
> supporting VRR on PCON.
> 
> Since VRR on PCON still needs some effort, enable adaptive sync SDP only
> when Panel replay with ALPM-Auxless is supported.

AFAICS we don't actually check for PCON vs. not anywhere, and thus
we are in fact allowing VRR with PCON. Or am I missign some check
somewhere?

> 
> Set the AS_SDP mode for Fixed Vtotal mode for fixed refresh rate case.
> 
> v2: Remove redundant target_rr assignments. (Ville)
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 15 ++++++++++++---
>  1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c013eb2e18a1..b5b855453845 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2934,7 +2934,15 @@ static void intel_dp_compute_as_sdp(struct intel_dp *intel_dp,
>  	const struct drm_display_mode *adjusted_mode =
>  		&crtc_state->hw.adjusted_mode;
>  
> -	if (!crtc_state->vrr.enable || !intel_dp->as_sdp_supported)
> +	if (!intel_dp->as_sdp_supported)
> +		return;
> +
> +	/*
> +	 * Support Adaptive-Sync SDP only for PR+AUX-less ALPM for now.
> +	 * It can be enabled for PCON + VRR, but that is currently not supported.
> +	 */
> +	if (!CAN_PANEL_REPLAY(intel_dp) ||
> +	    !intel_alpm_aux_less_wake_supported(intel_dp))
>  		return;
>  
>  	crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_ADAPTIVE_SYNC);
> @@ -2948,9 +2956,10 @@ static void intel_dp_compute_as_sdp(struct intel_dp *intel_dp,
>  		as_sdp->mode = DP_AS_SDP_FAVT_TRR_REACHED;
>  		as_sdp->target_rr = drm_mode_vrefresh(adjusted_mode);
>  		as_sdp->target_rr_divider = true;
> -	} else {
> +	} else if (crtc_state->vrr.enable) {
>  		as_sdp->mode = DP_AS_SDP_AVT_DYNAMIC_VTOTAL;
> -		as_sdp->target_rr = 0;
> +	} else {
> +		as_sdp->mode = DP_AS_SDP_AVT_FIXED_VTOTAL;
>  	}
>  }
>  
> -- 
> 2.45.2

-- 
Ville Syrjälä
Intel

  reply	other threads:[~2025-10-30  8:23 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-30  5:17 [PATCH 0/5] Fix Adaptive Sync SDP for Panel Replay Ankit Nautiyal
2025-10-30  5:17 ` [PATCH 1/5] drm/i915/dp: Fix readback for target_rr in Adaptive Sync SDP Ankit Nautiyal
2025-10-30  8:18   ` Ville Syrjälä
2025-10-30  9:28     ` Nautiyal, Ankit K
2025-10-30  5:17 ` [PATCH 2/5] drm/i915/dp: Allow AS_SDP only if panel replay + auxless alpm is supported Ankit Nautiyal
2025-10-30  8:23   ` Ville Syrjälä [this message]
2025-10-30  9:32     ` Nautiyal, Ankit K
2025-10-30  5:17 ` [PATCH 3/5] drm/i915/display: Take into account AS SDP in intel_dp_sdp_min_guardband Ankit Nautiyal
2025-10-30  5:17 ` [PATCH 4/5] drm/i915/alpm: Compute LOBF late after guardband is already determined Ankit Nautiyal
2025-10-30  5:17 ` [PATCH 5/5] drm/i915/alpm: Allow LOBF only if window1 > alpm check_entry lines Ankit Nautiyal
2025-10-30 10:35   ` Ville Syrjälä
2025-10-30 13:15     ` Nautiyal, Ankit K

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aQMghHM7AJAU6m0m@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jouni.hogander@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox