From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: intel-xe@lists.freedesktop.org, julia.filipchuk@intel.com,
matthew.brost@intel.com, "Zhanjun Dong" <zhanjun.dong@intel.com>,
"José Roberto de Souza" <jose.souza@intel.com>
Subject: Re: [PATCH v11 3/3] drm/xe/guc: Add dump_cache to optimize GuC CT/Log compression flow
Date: Wed, 14 Oct 2026 14:16:48 -0400 [thread overview]
Message-ID: <as_HEHsHR_F1aBgi@intel.com> (raw)
In-Reply-To: <20261013222846.308259-8-alan.previn.teres.alexis@intel.com>
On Tue, Oct 13, 2026 at 03:28:47PM -0700, Alan Previn wrote:
> During xe_devcoredump preparation, __xe_devcoredump_read is invoked
> multiple times, the first time just to get the output size.
> We should avoid time and energy waste of recompressing the
> GuC-log-event buffer and GuC-CT buffers repeatedly.
>
> Thus, add a dump_cache structure into GuC CT and log snapshot
> structures to attempt and store a first pass at compressing
> these buffers for reuse on subsequent calls to __xe_devcoredump_read.
>
> Also, ensure any failure of the first compression attempt will still
> fallback to store the raw dump without compression which is also
> required when CONFIG_DRM_XE_COMPRESS_DUMP is not enabled.
>
> Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
> Assisted-by: LLM
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
> drivers/gpu/drm/xe/xe_guc_ct.c | 14 +++-
> drivers/gpu/drm/xe/xe_guc_ct_types.h | 3 +
> drivers/gpu/drm/xe/xe_guc_log.c | 96 +++++++++++++++++++++------
> drivers/gpu/drm/xe/xe_guc_log.h | 4 +-
> drivers/gpu/drm/xe/xe_guc_log_types.h | 20 ++++++
> 5 files changed, 112 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_guc_ct.c b/drivers/gpu/drm/xe/xe_guc_ct.c
> index 0d2464c72277..e865d50e8b77 100644
> --- a/drivers/gpu/drm/xe/xe_guc_ct.c
> +++ b/drivers/gpu/drm/xe/xe_guc_ct.c
> @@ -2223,7 +2223,8 @@ void xe_guc_ct_snapshot_print(struct xe_guc_ct_snapshot *snapshot,
> if (snapshot->ctb)
> xe_guc_print_blob(gt, p, "[CTB]", "[CTB].data",
> &snapshot->ctb, 1,
> - snapshot->ctb_size, snapshot->ctb_size);
> + snapshot->ctb_size, snapshot->ctb_size,
> + &snapshot->dump_cache);
> } else {
> drm_puts(p, "CT disabled\n");
> }
> @@ -2241,6 +2242,7 @@ void xe_guc_ct_snapshot_free(struct xe_guc_ct_snapshot *snapshot)
> if (!snapshot)
> return;
>
> + xe_guc_dump_cache_fini(&snapshot->dump_cache);
> kfree(snapshot->ctb);
> kfree(snapshot);
> }
> @@ -2369,6 +2371,8 @@ static void ct_dead_print(struct xe_dead_ct *dead)
> static void ct_dead_worker_func(struct work_struct *w)
> {
> struct xe_guc_ct *ct = container_of(w, struct xe_guc_ct, dead.worker);
> + struct xe_guc_log_snapshot *snapshot_log;
> + struct xe_guc_ct_snapshot *snapshot_ct;
>
> if (!ct->dead.reported) {
> ct->dead.reported = true;
> @@ -2377,9 +2381,9 @@ static void ct_dead_worker_func(struct work_struct *w)
>
> spin_lock_irq(&ct->dead.lock);
>
> - xe_guc_log_snapshot_free(ct->dead.snapshot_log);
> + snapshot_log = ct->dead.snapshot_log;
> ct->dead.snapshot_log = NULL;
> - xe_guc_ct_snapshot_free(ct->dead.snapshot_ct);
> + snapshot_ct = ct->dead.snapshot_ct;
> ct->dead.snapshot_ct = NULL;
>
> if (ct->dead.reason & (1 << CT_DEAD_STATE_REARM)) {
> @@ -2389,5 +2393,9 @@ static void ct_dead_worker_func(struct work_struct *w)
> }
>
> spin_unlock_irq(&ct->dead.lock);
> +
> + /* Printing may have vmalloc'ed a compression cache; vfree() can sleep */
> + xe_guc_log_snapshot_free(snapshot_log);
> + xe_guc_ct_snapshot_free(snapshot_ct);
> }
> #endif
> diff --git a/drivers/gpu/drm/xe/xe_guc_ct_types.h b/drivers/gpu/drm/xe/xe_guc_ct_types.h
> index f88e588af0d3..5e33f9fd4cb0 100644
> --- a/drivers/gpu/drm/xe/xe_guc_ct_types.h
> +++ b/drivers/gpu/drm/xe/xe_guc_ct_types.h
> @@ -14,6 +14,7 @@
> #include <linux/xarray.h>
>
> #include "abi/guc_communication_ctb_abi.h"
> +#include "xe_guc_log_types.h"
>
> struct xe_bo;
>
> @@ -75,6 +76,8 @@ struct xe_guc_ct_snapshot {
> size_t ctb_size;
> /** @ctb: snapshot of the entire CTB */
> void *ctb;
> + /** @dump_cache: compressed copy of @ctb, built on first print */
> + struct xe_guc_dump_cache dump_cache;
> };
>
> /**
> diff --git a/drivers/gpu/drm/xe/xe_guc_log.c b/drivers/gpu/drm/xe/xe_guc_log.c
> index 47adaf70d5bf..90aeaccea596 100644
> --- a/drivers/gpu/drm/xe/xe_guc_log.c
> +++ b/drivers/gpu/drm/xe/xe_guc_log.c
> @@ -178,6 +178,7 @@ void xe_guc_log_snapshot_free(struct xe_guc_log_snapshot *snapshot)
> kfree(snapshot->copy);
> }
>
> + xe_guc_dump_cache_fini(&snapshot->dump_cache);
> kfree(snapshot);
> }
>
> @@ -230,10 +231,9 @@ struct xe_guc_log_snapshot *xe_guc_log_snapshot_capture(struct xe_guc_log *log,
> }
>
> #if IS_ENABLED(CONFIG_DRM_XE_COMPRESS_DUMP)
> -static void xe_guc_print_blob_compressed(struct xe_gt *gt, struct drm_printer *p,
> - const char *length_label, const char *data_label,
> - void **chunks, int num_chunks,
> - size_t chunk_size, size_t total_size)
> +static void xe_guc_compress_blob(struct xe_gt *gt, struct xe_guc_dump_cache *cache,
> + void **chunks, int num_chunks,
> + size_t chunk_size, size_t total_size)
> {
> zstd_parameters params;
> zstd_cstream *cstream;
> @@ -244,6 +244,9 @@ static void xe_guc_print_blob_compressed(struct xe_gt *gt, struct drm_printer *p
> char *dst = NULL;
> int i;
>
> + /* One shot only: every later print replays whatever this pass produced. */
> + cache->attempted = true;
> +
> /*
> * Pass 0 as estimated_src_size to use zstd level-3 defaults
> * (windowLog=18, 256KB window). Passing the full total_size would
> @@ -286,6 +289,17 @@ static void xe_guc_print_blob_compressed(struct xe_gt *gt, struct drm_printer *p
> zstd_in_buffer inbuf = { .src = chunks[i], .size = size, .pos = 0 };
>
> while (inbuf.pos < inbuf.size) {
> + /*
> + * zstd only guarantees forward progress while the output
> + * buffer has room. zstd_compress_bound() sizes dst so that
> + * a single frame always fits, but never risk spinning
> + * forever in an error-dump path.
> + */
> + if (outbuf.pos == outbuf.size) {
> + xe_gt_err(gt, "zstd output buffer exhausted\n");
> + goto err;
> + }
> +
> ret = zstd_compress_stream(cstream, &outbuf, &inbuf);
> if (ZSTD_isError(ret)) {
> xe_gt_err(gt, "zstd_compress_stream failed: %s\n",
> @@ -296,30 +310,48 @@ static void xe_guc_print_blob_compressed(struct xe_gt *gt, struct drm_printer *p
> remain -= size;
> }
>
> + /*
> + * zstd_end_stream() must be called until it returns 0, otherwise the
> + * frame epilogue is missing and no decompressor will accept the result.
> + * Running out of output before that happens is a hard error, not a
> + * reason to stop.
> + */
> do {
> + if (outbuf.pos == outbuf.size) {
> + xe_gt_err(gt, "zstd output buffer exhausted\n");
> + goto err;
> + }
> +
> ret = zstd_end_stream(cstream, &outbuf);
> if (ZSTD_isError(ret)) {
> xe_gt_err(gt, "zstd_end_stream failed: %s\n",
> ZSTD_getErrorName(ret));
> goto err;
> }
> - } while (ret > 0 && outbuf.pos < outbuf.size);
> + } while (ret);
>
> - drm_printf(p, "%s.length: 0x%zx -> 0x%zx Algo: ZSTD\n",
> - length_label, total_size, outbuf.pos);
> - xe_print_blob_ascii85(p, data_label, '\n', dst, 0,
> - DIV_ROUND_UP(outbuf.pos, sizeof(u32)) * sizeof(u32));
> - goto out;
> + cache->data = dst;
> + cache->size = outbuf.pos;
> + kvfree(wksp);
> + return;
>
> err:
> - drm_printf(p, "%s.length: 0x%zx Algo: ERROR (compression failed)\n",
> - length_label, total_size);
> -out:
> kvfree(dst);
> kvfree(wksp);
> }
> #endif
>
> +/**
> + * xe_guc_dump_cache_fini - release a dump blob's compression cache
> + * @cache: cache embedded in the snapshot being freed
> + */
> +void xe_guc_dump_cache_fini(struct xe_guc_dump_cache *cache)
> +{
> + kvfree(cache->data);
> + cache->data = NULL;
> + cache->size = 0;
> +}
> +
> /**
> * xe_guc_print_blob - Print binary data (compressed or uncompressed) as ascii85
> * @gt: GT structure for error reporting
> @@ -330,24 +362,46 @@ static void xe_guc_print_blob_compressed(struct xe_gt *gt, struct drm_printer *p
> * @num_chunks: number of elements in @chunks
> * @chunk_size: nominal size of each chunk; the last chunk may hold fewer valid bytes
> * @total_size: total uncompressed byte count across all chunks
> + * @cache: per-snapshot compression cache, zeroed at capture time
> *
> * If CONFIG_DRM_XE_COMPRESS_DUMP is enabled, compresses @total_size bytes using
> * zstd level-3 streaming compression and prints the result via @p using ascii85
> * encoding. Otherwise, directly prints the uncompressed data.
> - * On failure the function returns without printing the data blob.
> + *
> + * The compressed blob is produced once and kept in @cache, because a snapshot
> + * is printed repeatedly: __xe_devcoredump_read() measures the output before
> + * emitting it, and re-emits it a chunk at a time. Compressing per pass would
> + * let the measured size and the emitted bytes disagree.
> + *
> + * If compression fails the raw data is printed instead, so the dump is never
> + * lost. @cache->attempted latches that decision, so every later pass makes the same
> + * choice and produces byte-identical output.
> */
> void xe_guc_print_blob(struct xe_gt *gt __maybe_unused, struct drm_printer *p,
> const char *length_label, const char *data_label,
> void **chunks, int num_chunks,
> - size_t chunk_size, size_t total_size)
> + size_t chunk_size, size_t total_size,
> + struct xe_guc_dump_cache *cache __maybe_unused)
> {
> -#if IS_ENABLED(CONFIG_DRM_XE_COMPRESS_DUMP)
> - xe_guc_print_blob_compressed(gt, p, length_label, data_label,
> - chunks, num_chunks, chunk_size, total_size);
> -#else
> size_t remain;
> int i;
>
> +#if IS_ENABLED(CONFIG_DRM_XE_COMPRESS_DUMP)
> + if (!cache->attempted)
> + xe_guc_compress_blob(gt, cache, chunks, num_chunks,
> + chunk_size, total_size);
> +
> + if (cache->data) {
> + drm_printf(p, "%s.length: 0x%zx -> 0x%zx Algo: ZSTD\n",
> + length_label, total_size, cache->size);
> + xe_print_blob_ascii85(p, data_label, '\n', cache->data, 0,
> + round_up(cache->size, sizeof(u32)));
> + return;
> + }
> +
> + /* Compression failed - fallback to emit the blob uncompressed. */
> +#endif
> +
> drm_printf(p, "%s.length: 0x%zx Algo: RAW\n", length_label, total_size);
>
> /*
> @@ -366,7 +420,6 @@ void xe_guc_print_blob(struct xe_gt *gt __maybe_unused, struct drm_printer *p,
> DIV_ROUND_UP(size, sizeof(u32)) * sizeof(u32));
> remain -= size;
> }
> -#endif
> }
>
> /**
> @@ -393,7 +446,8 @@ void xe_guc_log_snapshot_print(struct xe_guc_log_snapshot *snapshot, struct drm_
>
> xe_guc_print_blob(gt, p, "[LOG]", "[LOG].data",
> snapshot->copy, snapshot->num_chunks,
> - GUC_LOG_CHUNK_SIZE, snapshot->size);
> + GUC_LOG_CHUNK_SIZE, snapshot->size,
> + &snapshot->dump_cache);
> }
>
> static inline void lfd_output_binary(struct drm_printer *p, char *buf, int buf_size)
> diff --git a/drivers/gpu/drm/xe/xe_guc_log.h b/drivers/gpu/drm/xe/xe_guc_log.h
> index 3e97647ee8b5..bb6415271e5f 100644
> --- a/drivers/gpu/drm/xe/xe_guc_log.h
> +++ b/drivers/gpu/drm/xe/xe_guc_log.h
> @@ -63,7 +63,9 @@ struct xe_guc_log_snapshot *xe_guc_log_snapshot_capture(struct xe_guc_log *log,
>
> void xe_guc_print_blob(struct xe_gt *gt, struct drm_printer *p, const char *length_label,
> const char *data_label, void **chunks, int num_chunks,
> - size_t chunk_size, size_t total_size);
> + size_t chunk_size, size_t total_size,
> + struct xe_guc_dump_cache *cache);
> +void xe_guc_dump_cache_fini(struct xe_guc_dump_cache *cache);
>
> void xe_guc_log_snapshot_print(struct xe_guc_log_snapshot *snapshot, struct drm_printer *p,
> struct xe_gt *gt);
> diff --git a/drivers/gpu/drm/xe/xe_guc_log_types.h b/drivers/gpu/drm/xe/xe_guc_log_types.h
> index 02851b924aa4..a38e9619c95d 100644
> --- a/drivers/gpu/drm/xe/xe_guc_log_types.h
> +++ b/drivers/gpu/drm/xe/xe_guc_log_types.h
> @@ -13,6 +13,24 @@
>
> struct xe_bo;
>
> +/**
> + * struct xe_guc_dump_cache - cached compressed copy of a dump blob
> + *
> + * A snapshot is printed more than once: __xe_devcoredump_read() walks it first
> + * with a NULL buffer to measure the output size, then again - once per chunk -
> + * to fill the user buffer. Compressing on every pass would be both wasteful and
> + * unsafe, as any difference between the measured size and the emitted bytes
> + * corrupts the dump. So compress at most once and replay the result.
> + */
> +struct xe_guc_dump_cache {
> + /** @data: compressed bytes, allocation padded up to a u32 boundary */
> + char *data;
> + /** @size: number of valid compressed bytes in @data */
> + size_t size;
> + /** @attempted: compression has been attempted; @data is final either way */
> + bool attempted;
> +};
> +
> /**
> * struct xe_guc_log_snapshot:
> * Capture of the GuC log plus various state useful for decoding the log
> @@ -36,6 +54,8 @@ struct xe_guc_log_snapshot {
> struct xe_uc_fw_version ver_want;
> /** @path: Path of GuC firmware blob */
> const char *path;
> + /** @dump_cache: compressed copy of @copy, built on first print */
> + struct xe_guc_dump_cache dump_cache;
> };
>
> /**
> --
> 2.43.0
>
next prev parent reply other threads:[~2026-10-14 18:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 22:28 [PATCH v11 0/3] drm/xe/guc: Compress GuC log and CTB dump with zstd Alan Previn
2026-10-13 22:28 ` [PATCH v11 1/3] drm/xe: Remove extra newlines from LRC snapshot dump Alan Previn
2026-10-13 22:28 ` [PATCH v11 2/3] drm/xe/guc: Compress GuC log and CTB dump with zstd Alan Previn
2026-10-13 22:28 ` [PATCH v11 3/3] drm/xe/guc: Add dump_cache to optimize GuC CT/Log compression flow Alan Previn
2026-10-14 18:16 ` Rodrigo Vivi [this message]
2026-10-13 23:29 ` ✗ CI.checkpatch: warning for drm/xe/guc: Compress GuC log and CTB dump with zstd (rev7) Patchwork
2026-10-13 23:31 ` ✓ CI.KUnit: success " Patchwork
2026-10-13 23:47 ` ✗ CI.checksparse: warning " Patchwork
2026-10-14 4:41 ` ✓ Xe.CI.BAT: success " Patchwork
2026-10-14 18:20 ` [PATCH v11 0/3] drm/xe/guc: Compress GuC log and CTB dump with zstd Rodrigo Vivi
2026-10-14 18:34 ` ✗ Xe.CI.FULL: failure for drm/xe/guc: Compress GuC log and CTB dump with zstd (rev7) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=as_HEHsHR_F1aBgi@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=alan.previn.teres.alexis@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=jose.souza@intel.com \
--cc=julia.filipchuk@intel.com \
--cc=matthew.brost@intel.com \
--cc=zhanjun.dong@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox