Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Hogander, Jouni" <jouni.hogander@intel.com>
To: "j@metarealtyinc.ca" <j@metarealtyinc.ca>
Cc: "intel-xe@lists.freedesktop.org" <intel-xe@lists.freedesktop.org>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>
Subject: Re: [PATCH] drm/i915/psr: ASYNC_VIDEO_TIMING_NOT_SUPPORTED_IN_PR not valid for eDP
Date: Fri, 9 Oct 2026 05:30:49 +0000	[thread overview]
Message-ID: <d592bde4b15a1c283f04e9412f46069f8a4926d5.camel@intel.com> (raw)
In-Reply-To: <20261009034715.10894-1-j@metarealtyinc.ca>

On Thu, 2026-10-08 at 23:47 -0400, Jake Steinman wrote:
> Hi Jouni,
> 
> Tested on the XPS 16 DA16260 (PTL, xe, 7.3-rc5, DA16260 PR quirk
> removed, no other changes): Panel Replay SU is smooth with this
> patch.
> 
> Tested-by: Jake Steinman <j@metarealtyinc.ca>
> 
> Two things it leaves:
> 
> - The panel still judders for a few seconds after panel power-on
>   (DPMS on). Holding PR inactive after power-on fixes that here; 8 s
>   is clean, 3 s is not quite enough.
> 
> - No DC5 on a static screen while PR is active: 0 entries against 550
>   on a static VT with the AS SDP suspended.
> 
> Since this panel needs a specific change for the first one anyway,
> could the AS SDP also be suspended while vblank is disabled on panels
> that handle it, as in the RFC? That keeps DC5/DC6 on a static screen.
> https://lore.kernel.org/r/20261006220500.3417572-1-j@metarealtyinc.ca

I don't really see why we should bind it to vblank. I think vblank is
also disabled most of the times anyways where we could benefit from
having AS SDP disabled.
> 
> If you respin, a Reported-by would be appreciated.

Of course. I already added it, but my checkpatch complained about
missing Closes tag. I wasn't sure if this patch is closing any gitlab
ticket. I was thinking adding them both when tested.

I still need to modify also the commit message and consider even using
the change. eDP spec is saying that AS SDP can be disabled:

"The Source device may disable the Adaptive-Sync SDP transmission by
setting its Adaptive Sync SDP Transmission Disable in PR Active State
bit (DB0[2] = 1) in the Adaptive-Sync SDP. DPCD 00107h[6] shall remain
set (DPCD 00107h[6] = 1)."

Even if "crtc_state->disable_as_sdp_when_pr_active == 1" it should be
ok to disable AS SDP sending (referring you RFC patch). I'll guess
having inverse logic in ASYNC_VIDEO_TIMING_NOT_SUPPORTED_IN_PR means
eDP sink should always support it.


BR,
Jouni Högander

> 
> Thanks,
> Jake


      reply	other threads:[~2026-10-09  5:33 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-07  8:34 [PATCH] drm/i915/psr: ASYNC_VIDEO_TIMING_NOT_SUPPORTED_IN_PR not valid for eDP Jouni Högander
2026-10-07  8:48 ` sashiko-bot
2026-10-07  9:17 ` ✗ CI.checkpatch: warning for " Patchwork
2026-10-07  9:19 ` ✓ CI.KUnit: success " Patchwork
2026-10-07 10:06 ` ✓ Xe.CI.BAT: " Patchwork
2026-10-07 11:27 ` ✓ Xe.CI.FULL: " Patchwork
2026-10-09  3:47 ` [PATCH] " Jake Steinman
2026-10-09  5:30   ` Hogander, Jouni [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d592bde4b15a1c283f04e9412f46069f8a4926d5.camel@intel.com \
    --to=jouni.hogander@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=j@metarealtyinc.ca \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox