From: James Prestwood <prestwoj@gmail.com>
To: iwd@lists.01.org
Subject: Re: DEL_INTERFACE and CMD_SET_CQM failed; Could not register frame watch type 00d0: -95
Date: Mon, 19 Apr 2021 12:06:36 -0700 [thread overview]
Message-ID: <05cfb41c9aa2ef96b57cf70b063bbaba1a20786e.camel@gmail.com> (raw)
In-Reply-To: <8GPTRQ.EJ0TKL2WUWYA1@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 7181 bytes --]
Hi Philip,
On Mon, 2021-04-19 at 19:16 +0100, Philip Stewart wrote:
> Hi James,
>
> Thanks for the clarification around DEL_INTERFACE/CQM, that's
> reassuring and makes sense!
>
> On the MAC address, yes - /sys/class/ieee80211/phy0/macaddress
> reports
> all zeros. Would you expect the wl driver to set this?
I would expect that yeah. My only guess is that broadcom-wl is a
fullmac driver that doesn't set this and handles everything in the
firmware. You could see what extended features and commands it
advertises with 'iw list' to verify.
>
> n.b. I note that '[iwd]# station wlan0 show' and '# iw wlan0 link'
> both
> successfully report the MAC address for the access point.
>
> Cheers,
> Phil
>
> On Mon, 19 Apr, 2021 at 09:07, James Prestwood <prestwoj@gmail.com>
> wrote:
> > Hi Philip,
> >
> > On Sun, 2021-04-18 at 18:21 +0100, Philip Stewart wrote:
> > > Hello,
> > >
> > > I've recently switched from NetworkManager and wpasupplicant to
> > > systemd-networkd and iwd. Whilst everything appears to be
> > > working
> > > fine,
> > > I'm curious about some failures reported by iwd:
> > >
> > > Apr 18 15:10:32 systemd[1]: Starting Wireless service...
> > > Apr 18 15:10:33 iwd[661]: Wireless daemon version 1.12
> > > Apr 18 15:10:33 systemd[1]: Started Wireless service.
> > > Apr 18 15:10:33 iwd[661]: station: Network configuration is
> > > disabled.
> > > Apr 18 15:10:33 iwd[661]: Wiphy: 0, Name: phy0
> > > Apr 18 15:10:33 iwd[661]: Permanent Address:
> > > 00:00:00:00:00:00
> > > Apr 18 15:10:33 iwd[661]: Bands: 2.4 GHz 5 GHz
> > > Apr 18 15:10:33 iwd[661]: Ciphers: CCMP TKIP BIP
> > > Apr 18 15:10:33 iwd[661]: Supported iftypes: ad-hoc
> > > station
> > > Apr 18 15:10:33 iwd[661]: DEL_INTERFACE failed: Operation not
> > > supported
> > > Apr 18 15:10:33 iwd[661]: Could not register frame watch type
> > > 00d0:
> > > -95
> > > Apr 18 15:10:33 iwd[661]: Could not register frame watch type
> > > 00d0:
> > > -95
> > > Apr 18 15:10:33 iwd[661]: Could not register frame watch type
> > > 00d0:
> > > -95
> > > Apr 18 15:10:33 iwd[661]: Could not register frame watch type
> > > 00d0:
> > > -95
> > > Apr 18 15:10:33 iwd[661]: CMD_SET_CQM failed: Operation not
> > > supported
> > > Apr 18 15:10:33 iwd[661]: Could not register frame watch type
> > > 00d0:
> > > -95
> > > Apr 18 15:10:33 iwd[661]: Could not register frame watch type
> > > 00d0:
> > > -95
> > >
> > > Further, I note that in the output of 'networkctl status wlan0',
> > > the
> > > WiFi access point MAC address is reported as 00:00:00:00:00:00
> > > and
> > > I'm
> > > wondering if this is a consequence of these failures and if
> > > there is
> > > anything I can do about it?
> >
> > I'm not familiar with the wl driver specifically but I'm guessing
> > it
> > does not support DEL_INTERFACE/CQM.
> >
> > This is fine though. In the DEL_INTERFACE case IWD will just use
> > the
> > interface that already exists on the system. Effectively
> > [General].UseDefaultInterface=true.
> >
> > CQM is also ok as the driver (presumably) manages low RSSI itself
> > and
> > will roam on its own. At least this is what I would expect.
> >
> > We pull the permanent address from
> > /sys/class/ieee80211/<phy>/macaddress. Is that reporting zero's?
> >
> > Thanks,
> > James
> >
> > > Kind regards,
> > > Phil
> > >
> > > # lspci -vv -d 14e4:
> > > 03:00.0 Network controller: Broadcom Inc. and subsidiaries
> > > BCM4322
> > > 802.11a/b/g/n Wireless LAN Controller (rev 01)
> > > Subsystem: Apple Inc. AirPort Extreme
> > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > > ParErr-
> > > Stepping- SERR- FastB2B- DisINTx-
> > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > Latency: 0, Cache Line Size: 256 bytes
> > > Interrupt: pin A routed to IRQ 20
> > > Region 0: Memory at d3200000 (64-bit, non-prefetchable)
> > > [size=16K]
> > > Capabilities: [40] Power Management version 3
> > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> > > PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
> > > Capabilities: [58] Vendor Specific Information: Len=78 <?>
> > > Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
> > > Address: 0000000000000000 Data: 0000
> > > Capabilities: [d0] Express (v1) Endpoint, MSI 00
> > > DevCap: MaxPayload 128 bytes, PhantFunc 0,
> > > Latency
> > > L0s <4us, L1
> > > unlimited
> > > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> > > SlotPowerLimit 0.000W
> > > DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
> > > RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
> > > MaxPayload 128 bytes, MaxReadReq 128 bytes
> > > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq-
> > > AuxPwr- TransPend-
> > > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM
> > > L0s
> > > L1, Exit Latency
> > > L0s <4us, L1 <64us
> > > ClockPM+ Surprise- LLActRep- BwNot-
> > > ASPMOptComp-
> > > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes,
> > > Disabled-
> > > CommClk+
> > > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> > > LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
> > > TrErr- Train- SlotClk+ DLActive- BWMgmt-
> > > ABWMgmt-
> > > Capabilities: [100 v1] Advanced Error Reporting
> > > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> > > UnxCmplt- RxOF-
> > > MalfTLP- ECRC- UnsupReq- ACSViol-
> > > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
> > > UnxCmplt- RxOF-
> > > MalfTLP- ECRC- UnsupReq- ACSViol-
> > > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
> > > UnxCmplt- RxOF+
> > > MalfTLP+ ECRC- UnsupReq- ACSViol-
> > > CESta: RxErr- BadTLP- BadDLLP- Rollover-
> > > Timeout-
> > > AdvNonFatalErr-
> > > CEMsk: RxErr- BadTLP- BadDLLP- Rollover-
> > > Timeout-
> > > AdvNonFatalErr+
> > > AERCap: First Error Pointer: 00, ECRCGenCap+
> > > ECRCGenEn- ECRCChkCap+
> > > ECRCChkEn-
> > > MultHdrRecCap- MultHdrRecEn- TLPPfxPres-
> > > HdrLogCap-
> > > HeaderLog: 00000000 00000000 00000000 00000000
> > > Capabilities: [13c v1] Virtual Channel
> > > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> > > Arb: Fixed- WRR32- WRR64- WRR128-
> > > Ctrl: ArbSelect=Fixed
> > > Status: InProgress-
> > > VC0: Caps: PATOffset=00 MaxTimeSlots=1
> > > RejSnoopTrans-
> > > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
> > > WRR256-
> > > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> > > Status: NegoPending- InProgress-
> > > Capabilities: [160 v1] Device Serial Number xx-xx-xx-xx-xx-xx-
> > > xx-xx
> > > Capabilities: [16c v1] Power Budgeting <?>
> > > Kernel driver in use: wl
> > > Kernel modules: ssb, wl
> > >
> > >
> > > _______________________________________________
> > > iwd mailing list -- iwd(a)lists.01.org
> > > To unsubscribe send an email to iwd-leave(a)lists.01.org
>
>
next prev parent reply other threads:[~2021-04-19 19:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-18 17:21 DEL_INTERFACE and CMD_SET_CQM failed; Could not register frame watch type 00d0: -95 Philip Stewart
2021-04-19 16:07 ` James Prestwood
2021-04-19 18:16 ` Philip Stewart
2021-04-19 19:06 ` James Prestwood [this message]
2021-04-19 19:58 ` Philip Stewart
2021-04-19 20:10 ` James Prestwood
2021-04-19 20:41 ` Philip Stewart
2021-04-19 20:55 ` Denis Kenzior
2021-04-19 21:25 ` Philip Stewart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=05cfb41c9aa2ef96b57cf70b063bbaba1a20786e.camel@gmail.com \
--to=prestwoj@gmail.com \
--cc=iwd@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox