* Re: atl1c: Atheros L1C Gigabit Ethernet driver
2013-02-15 10:34 atl1c: Atheros L1C Gigabit Ethernet driver Dan Carpenter
@ 2013-02-15 11:12 ` Dan Carpenter
2013-02-18 21:54 ` J. K. Cliburn
2013-02-18 23:39 ` Huang, Xiong
2 siblings, 0 replies; 4+ messages in thread
From: Dan Carpenter @ 2013-02-15 11:12 UTC (permalink / raw)
To: kernel-janitors
Jie Yang's email is bouncing. 2009 was a long time ago. Jay,
Chris, any ideas?
regards,
dan carpenter
On Fri, Feb 15, 2013 at 01:34:28PM +0300, Dan Carpenter wrote:
> Hello Jie Yang,
>
> The patch 43250ddd75a3: "atl1c: Atheros L1C Gigabit Ethernet driver"
> from Feb 18, 2009, leads to the following Smatch warning:
> "drivers/net/ethernet/atheros/atl1c/atl1c_hw.c:472 atl1c_phy_setup_adv()
> warn: odd binop '0x300 & 0xfffffffffffffcff'"
>
> [ This check as too many false positives so I haven't released it ]
>
> drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
> 472 u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP &
> 473 ~GIGA_CR_1000T_SPEED_MASK;
>
> The defines are set up like this:
>
> #define GIGA_CR_1000T_SPEED_MASK 0x0300
> #define GIGA_CR_1000T_DEFAULT_CAP 0x0300
>
> So we're just setting mii_giga_ctrl_data to zero. It seems odd. Did
> you intend to do the bitwise negate of GIGA_CR_1000T_SPEED_MASK?
> They're only used one time so I can't tell from the context what was
> intented.
>
> regards,
> dan carpenter
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: atl1c: Atheros L1C Gigabit Ethernet driver
2013-02-15 10:34 atl1c: Atheros L1C Gigabit Ethernet driver Dan Carpenter
2013-02-15 11:12 ` Dan Carpenter
@ 2013-02-18 21:54 ` J. K. Cliburn
2013-02-18 23:39 ` Huang, Xiong
2 siblings, 0 replies; 4+ messages in thread
From: J. K. Cliburn @ 2013-02-18 21:54 UTC (permalink / raw)
To: kernel-janitors
Xiong,
Is Jie still an active maintainer of atl1c?
Thanks,
Jay
On 02/15/2013 05:12 AM, Dan Carpenter wrote:
> Jie Yang's email is bouncing. 2009 was a long time ago. Jay,
> Chris, any ideas?
>
> regards,
> dan carpenter
>
> On Fri, Feb 15, 2013 at 01:34:28PM +0300, Dan Carpenter wrote:
>> Hello Jie Yang,
>>
>> The patch 43250ddd75a3: "atl1c: Atheros L1C Gigabit Ethernet driver"
>> from Feb 18, 2009, leads to the following Smatch warning:
>> "drivers/net/ethernet/atheros/atl1c/atl1c_hw.c:472 atl1c_phy_setup_adv()
>> warn: odd binop '0x300 & 0xfffffffffffffcff'"
>>
>> [ This check as too many false positives so I haven't released it ]
>>
>> drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
>> 472 u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP &
>> 473 ~GIGA_CR_1000T_SPEED_MASK;
>>
>> The defines are set up like this:
>>
>> #define GIGA_CR_1000T_SPEED_MASK 0x0300
>> #define GIGA_CR_1000T_DEFAULT_CAP 0x0300
>>
>> So we're just setting mii_giga_ctrl_data to zero. It seems odd. Did
>> you intend to do the bitwise negate of GIGA_CR_1000T_SPEED_MASK?
>> They're only used one time so I can't tell from the context what was
>> intented.
>>
>> regards,
>> dan carpenter
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: atl1c: Atheros L1C Gigabit Ethernet driver
2013-02-15 10:34 atl1c: Atheros L1C Gigabit Ethernet driver Dan Carpenter
2013-02-15 11:12 ` Dan Carpenter
2013-02-18 21:54 ` J. K. Cliburn
@ 2013-02-18 23:39 ` Huang, Xiong
2 siblings, 0 replies; 4+ messages in thread
From: Huang, Xiong @ 2013-02-18 23:39 UTC (permalink / raw)
To: kernel-janitors
No, he has left this company. Can you please replace it with nic-devel@qca.qualcomm.com ? thanks a lot !
-Xiong
> -----Original Message-----
> From: J. K. Cliburn [mailto:jcliburn@gmail.com]
> Sent: Tuesday, February 19, 2013 5:54 AM
> To: Dan Carpenter
> Cc: Chris Snook; kernel-janitors@vger.kernel.org; Huang, Xiong
> Subject: Re: atl1c: Atheros L1C Gigabit Ethernet driver
>
> Xiong,
>
> Is Jie still an active maintainer of atl1c?
>
> Thanks,
> Jay
>
> On 02/15/2013 05:12 AM, Dan Carpenter wrote:
> > Jie Yang's email is bouncing. 2009 was a long time ago. Jay, Chris,
> > any ideas?
> >
> > regards,
> > dan carpenter
> >
> > On Fri, Feb 15, 2013 at 01:34:28PM +0300, Dan Carpenter wrote:
> >> Hello Jie Yang,
> >>
> >> The patch 43250ddd75a3: "atl1c: Atheros L1C Gigabit Ethernet driver"
> >> from Feb 18, 2009, leads to the following Smatch warning:
> >> "drivers/net/ethernet/atheros/atl1c/atl1c_hw.c:472
> atl1c_phy_setup_adv()
> >> warn: odd binop '0x300 & 0xfffffffffffffcff'"
> >>
> >> [ This check as too many false positives so I haven't released it ]
> >>
> >> drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
> >> 472 u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP &
> >> 473 ~GIGA_CR_1000T_SPEED_MASK;
> >>
> >> The defines are set up like this:
> >>
> >> #define GIGA_CR_1000T_SPEED_MASK 0x0300
> >> #define GIGA_CR_1000T_DEFAULT_CAP 0x0300
> >>
> >> So we're just setting mii_giga_ctrl_data to zero. It seems odd. Did
> >> you intend to do the bitwise negate of GIGA_CR_1000T_SPEED_MASK?
> >> They're only used one time so I can't tell from the context what was
> >> intented.
> >>
> >> regards,
> >> dan carpenter
^ permalink raw reply [flat|nested] 4+ messages in thread