[PATCH] staging: rtl8192ee: Correct bitmask in comparsion

[PATCH] staging: rtl8192ee: Correct bitmask in comparsion

[Andrey Utkin]

See https://bugzilla.kernel.org/show_bug.cgi?idx041
---8<---
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
---
 drivers/staging/rtl8192ee/base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8192ee/base.c b/drivers/staging/rtl8192ee/base.c
index a7c69f7..71ed12e 100644
--- a/drivers/staging/rtl8192ee/base.c
+++ b/drivers/staging/rtl8192ee/base.c
@@ -827,7 +827,7 @@ static u8 _rtl_get_vht_highest_n_rate(struct ieee80211_hw *hw,
 	u16 map = le16_to_cpu(sta->vht_cap.vht_mcs.tx_mcs_map);
 
 	if ((get_rf_type(rtlphy) = RF_2T2R) &&
-	    (map & 0x000c) != 0x000c0) {
+	    (map & 0x000c) != 0x000c) {
 		if ((map & 0x000c) >> 2 = IEEE80211_VHT_MCS_SUPPORT_0_7)
 			hw_rate  			rtlpriv->cfg->maps[RTL_RC_VHT_RATE_2SS_MCS7];
-- 
1.8.3.2

Re: [PATCH] staging: rtl8192ee: Correct bitmask in comparsion

[Dan Carpenter]

On Sat, Jul 05, 2014 at 02:40:13AM +0300, Andrey Utkin wrote:
> See https://bugzilla.kernel.org/show_bug.cgi?idx041
> ---8<---
> Reported-by: David Binderman <dcb314@hotmail.com>
> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>

Following the link to bugzilla, this is a static checker fix.

As far as I can see this patch is just based on guess work?  Otherwise
put some kind of description why your fix is correct in the changelog.

regards,
dan carpenter

[PATCH] staging: rtl8192ee: Correct bitmask in comparsion

[Andrey Utkin]

The issue is discovered by static checker. The proposed change (0x000c0
-> 0x000c) is likely correct because:
1. 16-bit `map` holds value coming from struct
ieee80211_vht_mcs_info.tx_mcs_map, which is described so: "TX MCS map 2
bits for each stream, total 8 streams". The changed code refers to case
of 2 TX streams, and 0x000c mask filters two bits related to the second
stream. Some codelines below 0x0003 mask is used to test first stream.
2. Mask 0x000c is used 3 more times in that place.
3. Specifying 5 digits of hex value is uncommon, especially while working
with `u16` variable. So likely the trailing zero is a typo.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?idx041
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
---
 drivers/staging/rtl8192ee/base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8192ee/base.c b/drivers/staging/rtl8192ee/base.c
index a7c69f7..71ed12e 100644
--- a/drivers/staging/rtl8192ee/base.c
+++ b/drivers/staging/rtl8192ee/base.c
@@ -827,7 +827,7 @@ static u8 _rtl_get_vht_highest_n_rate(struct ieee80211_hw *hw,
 	u16 map = le16_to_cpu(sta->vht_cap.vht_mcs.tx_mcs_map);
 
 	if ((get_rf_type(rtlphy) = RF_2T2R) &&
-	    (map & 0x000c) != 0x000c0) {
+	    (map & 0x000c) != 0x000c) {
 		if ((map & 0x000c) >> 2 = IEEE80211_VHT_MCS_SUPPORT_0_7)
 			hw_rate  			rtlpriv->cfg->maps[RTL_RC_VHT_RATE_2SS_MCS7];
-- 
1.8.3.2

Re: [PATCH] staging: rtl8192ee: Correct bitmask in comparsion

[Dan Carpenter]

On Tue, Jul 08, 2014 at 04:54:59PM +0300, Andrey Utkin wrote:
> The issue is discovered by static checker. The proposed change (0x000c0
> -> 0x000c) is likely correct because:
> 1. 16-bit `map` holds value coming from struct
> ieee80211_vht_mcs_info.tx_mcs_map, which is described so: "TX MCS map 2
> bits for each stream, total 8 streams". The changed code refers to case
> of 2 TX streams, and 0x000c mask filters two bits related to the second
> stream. Some codelines below 0x0003 mask is used to test first stream.
> 2. Mask 0x000c is used 3 more times in that place.
> 3. Specifying 5 digits of hex value is uncommon, especially while working
> with `u16` variable. So likely the trailing zero is a typo.

This changelog is perfect.  Thanks.

regards,
dan carpenter