From: Baoquan He <bhe@redhat.com>
To: toshi.kani@hp.com, horms@verge.net.au
Cc: dyoung@redhat.com, kexec@lists.infradead.org,
Baoquan He <bhe@redhat.com>
Subject: [Patch v3] Add persistent memory support
Date: Wed, 19 Aug 2015 17:03:49 +0800 [thread overview]
Message-ID: <1439975029-25611-1-git-send-email-bhe@redhat.com> (raw)
Kernel add E820_PRAM or E820_PMEM type for NVDIMM memory device.
Now support them in kexec too.
Reported-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
---
include/x86/x86-linux.h | 2 ++
kexec/arch/i386/crashdump-x86.c | 15 ++++++++++++---
kexec/arch/i386/kexec-x86-common.c | 10 ++++++++++
kexec/arch/i386/x86-linux-setup.c | 6 ++++++
kexec/firmware_memmap.c | 4 ++++
kexec/kexec.h | 2 ++
6 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/include/x86/x86-linux.h b/include/x86/x86-linux.h
index 50c7324..7834751 100644
--- a/include/x86/x86-linux.h
+++ b/include/x86/x86-linux.h
@@ -21,6 +21,8 @@ struct e820entry {
#define E820_RESERVED 2
#define E820_ACPI 3 /* usable as RAM once ACPI tables have been read */
#define E820_NVS 4
+#define E820_PMEM 7
+#define E820_PRAM 12
} __attribute__((packed));
#endif
diff --git a/kexec/arch/i386/crashdump-x86.c b/kexec/arch/i386/crashdump-x86.c
index 82bf239..598a78f 100644
--- a/kexec/arch/i386/crashdump-x86.c
+++ b/kexec/arch/i386/crashdump-x86.c
@@ -301,6 +301,10 @@ static int get_crash_memory_ranges(struct memory_range **range, int *ranges,
type = RANGE_ACPI;
} else if(memcmp(str,"ACPI Non-volatile Storage\n",26) == 0 ) {
type = RANGE_ACPI_NVS;
+ } else if(memcmp(str,"Persistent Memory (legacy)\n",27) == 0 ) {
+ type = RANGE_PRAM;
+ } else if(memcmp(str,"Persistent Memory\n",18) == 0 ) {
+ type = RANGE_PMEM;
} else if(memcmp(str,"reserved\n",9) == 0 ) {
type = RANGE_RESERVED;
} else if (memcmp(str, "GART\n", 5) == 0) {
@@ -640,6 +644,8 @@ static void cmdline_add_memmap_internal(char *cmdline, unsigned long startk,
strcat (str_mmap, "K$");
else if (type == RANGE_ACPI || type == RANGE_ACPI_NVS)
strcat (str_mmap, "K#");
+ else if (type == RANGE_PRAM)
+ strcat (str_mmap, "K!");
ultoa(startk, str_tmp);
strcat (str_mmap, str_tmp);
@@ -674,10 +680,11 @@ static int cmdline_add_memmap(char *cmdline, struct memory_range *memmap_p)
endk = (memmap_p[i].end + 1)/1024;
type = memmap_p[i].type;
- /* Only adding memory regions of RAM and ACPI */
+ /* Only adding memory regions of RAM and ACPI and Persistent Mem */
if (type != RANGE_RAM &&
type != RANGE_ACPI &&
- type != RANGE_ACPI_NVS)
+ type != RANGE_ACPI_NVS &&
+ type != RANGE_PRAM)
continue;
if (type == RANGE_ACPI || type == RANGE_ACPI_NVS)
@@ -997,7 +1004,9 @@ int load_crashdump_segments(struct kexec_info *info, char* mod_cmdline,
unsigned long start, end, size, type;
if ( !( mem_range[i].type == RANGE_ACPI
|| mem_range[i].type == RANGE_ACPI_NVS
- || mem_range[i].type == RANGE_RESERVED))
+ || mem_range[i].type == RANGE_RESERVED
+ || mem_range[i].type == RANGE_PMEM
+ || mem_range[i].type == RANGE_PRAM))
continue;
start = mem_range[i].start;
end = mem_range[i].end;
diff --git a/kexec/arch/i386/kexec-x86-common.c b/kexec/arch/i386/kexec-x86-common.c
index 3624192..28e5fc8 100644
--- a/kexec/arch/i386/kexec-x86-common.c
+++ b/kexec/arch/i386/kexec-x86-common.c
@@ -94,6 +94,12 @@ static int get_memory_ranges_proc_iomem(struct memory_range **range, int *ranges
else if (memcmp(str, "ACPI Non-volatile Storage\n", 26) == 0) {
type = RANGE_ACPI_NVS;
}
+ else if (memcmp(str, "Persistent Memory (legacy)\n", 27) == 0) {
+ type = RANGE_PRAM;
+ }
+ else if (memcmp(str, "Persistent Memory\n", 18) == 0) {
+ type = RANGE_PMEM;
+ }
else {
continue;
}
@@ -149,6 +155,10 @@ unsigned xen_e820_to_kexec_type(uint32_t type)
return RANGE_ACPI;
case E820_NVS:
return RANGE_ACPI_NVS;
+ case E820_PMEM:
+ return RANGE_PMEM;
+ case E820_PRAM:
+ return RANGE_PRAM;
case E820_RESERVED:
default:
return RANGE_RESERVED;
diff --git a/kexec/arch/i386/x86-linux-setup.c b/kexec/arch/i386/x86-linux-setup.c
index 9271c6c..c75adaa 100644
--- a/kexec/arch/i386/x86-linux-setup.c
+++ b/kexec/arch/i386/x86-linux-setup.c
@@ -705,6 +705,12 @@ static void add_e820_map_from_mr(struct x86_linux_param_header *real_mode,
case RANGE_ACPI_NVS:
e820[i].type = E820_NVS;
break;
+ case RANGE_PMEM:
+ e820[i].type = E820_PMEM;
+ break;
+ case RANGE_PRAM:
+ e820[i].type = E820_PRAM;
+ break;
default:
case RANGE_RESERVED:
e820[i].type = E820_RESERVED;
diff --git a/kexec/firmware_memmap.c b/kexec/firmware_memmap.c
index 6be3c7c..4d84f00 100644
--- a/kexec/firmware_memmap.c
+++ b/kexec/firmware_memmap.c
@@ -168,6 +168,10 @@ static int parse_memmap_entry(const char *entry, struct memory_range *range)
range->type = RANGE_ACPI_NVS;
else if (strcmp(type, "Uncached RAM") == 0)
range->type = RANGE_UNCACHED;
+ else if (strcmp(type, "Persistent Memory (legacy)") == 0)
+ range->type = RANGE_PRAM;
+ else if (strcmp(type, "Persistent Memory") == 0)
+ range->type = RANGE_PMEM;
else {
fprintf(stderr, "Unknown type (%s) while parsing %s. Please "
"report this as bug. Using RANGE_RESERVED now.\n",
diff --git a/kexec/kexec.h b/kexec/kexec.h
index b129c15..0fa977f 100644
--- a/kexec/kexec.h
+++ b/kexec/kexec.h
@@ -136,6 +136,8 @@ struct memory_range {
#define RANGE_ACPI 2
#define RANGE_ACPI_NVS 3
#define RANGE_UNCACHED 4
+#define RANGE_PMEM 6
+#define RANGE_PRAM 11
};
struct memory_ranges {
--
2.1.0
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
next reply other threads:[~2015-08-19 9:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-19 9:03 Baoquan He [this message]
2015-08-19 9:28 ` [Patch v3] Add persistent memory support Dave Young
2015-08-19 10:45 ` Baoquan He
2015-08-20 2:38 ` Dave Young
2015-08-20 2:52 ` Baoquan He
2015-08-20 7:42 ` Dave Young
2015-08-24 19:54 ` Toshi Kani
2015-08-25 7:37 ` Dave Young
2015-09-02 1:04 ` Simon Horman
2015-09-23 8:33 ` Petr Tesarik
2015-09-23 9:16 ` Baoquan He
2015-09-23 9:23 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439975029-25611-1-git-send-email-bhe@redhat.com \
--to=bhe@redhat.com \
--cc=dyoung@redhat.com \
--cc=horms@verge.net.au \
--cc=kexec@lists.infradead.org \
--cc=toshi.kani@hp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox