Kexec Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Hoeun Ryu <hoeun.ryu@gmail.com>
To: Dave Young <dyoung@redhat.com>
Cc: Matthew Leach <matthew.leach@arm.com>,
	Russell King <rmk@armlinux.org.uk>,
	kexec@lists.infradead.org, Simon Horman <horms@verge.net.au>,
	Wang Nan <wangnan0@huawei.com>
Subject: Re: [PATCH] kexec:arm: support zImage with appended device tree
Date: Tue, 27 Jun 2017 11:13:17 +0900	[thread overview]
Message-ID: <1498529597.1734.2.camel@gmail.com> (raw)
In-Reply-To: <20170626025256.GA3378@dhcp-128-65.nay.redhat.com>

On Mon, 2017-06-26 at 10:52 +0800, Dave Young wrote:
> On 06/23/17 at 05:55pm, Hoeun Ryu wrote:
> > 
> > Arm linux supports zImage with appended dtb
> > (CONFIG_ARM_APPENDED_DTB) and
> > the concatenated image is generated like `cat zImage dtb >
> > zImage_w_dtb`.
> > 
> > This patch is to support the concatednated zImage. This changes the
> > priority of source of dtb file.
> > 
> >  1. --dtb dtb_file
> >  2. zImage_w_dtb	<= newly added
> >  3. /sys/firmware/fdt
> >  4. /proc/device-tree
> The original default fdt is /sys/firmware/fdt, after your changes it
> becomes zImage attached dtb, presumably one knows his zImage appended
> a
> dtb it is fine, but if one does not notice it, it changes the
> behavior
> he expects.
> 
> How about add a new option for zImage_dtb, like --zImage-dtb
> 

It sounds good to me too.
I think I can accept your suggestion in the next version if the others
agree.

Thank you for the review.

> > 
> > 
> > Users don't need to specify dtb file in the command line and don't
> > have to
> > have /sys/firmware/fdt or /proc/device-tree if dtb is available in
> > zImage.
> > 
> > Signed-off-by: Hoeun Ryu <hoeun.ryu@gmail.com>
> > ---
> >  kexec/arch/arm/kexec-arm.h        |  1 +
> >  kexec/arch/arm/kexec-zImage-arm.c | 47
> > ++++++++++++++++++++++++++++++---------
> >  2 files changed, 37 insertions(+), 11 deletions(-)
> > 
> > diff --git a/kexec/arch/arm/kexec-arm.h b/kexec/arch/arm/kexec-
> > arm.h
> > index a74cce2..94695b7 100644
> > --- a/kexec/arch/arm/kexec-arm.h
> > +++ b/kexec/arch/arm/kexec-arm.h
> > @@ -4,6 +4,7 @@
> >  #include <sys/types.h>
> >  
> >  #define SYSFS_FDT "/sys/firmware/fdt"
> > +#define APPENDED_FDT ((char *)-1) /* it doesn't mean to be opened.
> > */
> >  #define BOOT_BLOCK_VERSION 17
> >  #define BOOT_BLOCK_LAST_COMP_VERSION 16
> >  
> > diff --git a/kexec/arch/arm/kexec-zImage-arm.c
> > b/kexec/arch/arm/kexec-zImage-arm.c
> > index 7f02b93..59f0003 100644
> > --- a/kexec/arch/arm/kexec-zImage-arm.c
> > +++ b/kexec/arch/arm/kexec-zImage-arm.c
> > @@ -390,6 +390,7 @@ int zImage_arm_load(int argc, char **argv,
> > const char *buf, off_t len,
> >  	initrd_size = 0;
> >  	use_atags = 0;
> >  	dtb_file = NULL;
> > +	dtb_buf = NULL;
> >  	while((opt = getopt_long(argc, argv, short_options,
> > options, 0)) != -1) {
> >  		switch(opt) {
> >  		default:
> > @@ -424,14 +425,6 @@ int zImage_arm_load(int argc, char **argv,
> > const char *buf, off_t len,
> >  		return -1;
> >  	}
> >  
> > -	if (!use_atags && !dtb_file) {
> > -		int f;
> > -
> > -		f = have_sysfs_fdt();
> > -		if (f)
> > -			dtb_file = SYSFS_FDT;
> > -	}
> > -
> >  	if (command_line) {
> >  		command_line_len = strlen(command_line) + 1;
> >  		if (command_line_len > COMMAND_LINE_SIZE)
> > @@ -440,9 +433,6 @@ int zImage_arm_load(int argc, char **argv,
> > const char *buf, off_t len,
> >  	if (ramdisk)
> >  		ramdisk_buf = slurp_file(ramdisk, &initrd_size);
> >  
> > -	if (dtb_file)
> > -		dtb_buf = slurp_file(dtb_file, &dtb_length);
> > -
> >  	if (len > 0x34) {
> >  		const struct zimage_header *hdr;
> >  		off_t size;
> > @@ -459,6 +449,25 @@ int zImage_arm_load(int argc, char **argv,
> > const char *buf, off_t len,
> >  				  (unsigned long long)size,
> >  				  (unsigned long long)len);
> >  
> > +			/* check if zImage has an appended dtb */
> > +			if (!dtb_file) {
> > +				if (fdt_check_header(buf + size)
> > == 0) {
> > +					/*
> > +					 * dtb_file won't be
> > opened. It's set
> > +					 * just to pass NULL
> > checking.
> > +					 */
> > +					dtb_file = APPENDED_FDT;
> > +					dtb_length =
> > fdt_totalsize(buf + size);
> > +					dtb_buf =
> > xmalloc(dtb_length);
> > +					memcpy(dtb_buf, buf+size,
> > dtb_length);
> > +
> > +					dbgprintf("found appended
> > dtb, size 0x%llx\n",
> > +						  (unsigned long
> > long)dtb_length);
> > +
> > +
> > +				}
> > +			}
> > +
> >  			if (size > len) {
> >  				fprintf(stderr,
> >  					"zImage is truncated -
> > file 0x%llx vs header 0x%llx\n",
> > @@ -575,6 +584,22 @@ int zImage_arm_load(int argc, char **argv,
> > const char *buf, off_t len,
> >  		initrd_base = kernel_base + _ALIGN(len * 5,
> > getpagesize());
> >  	}
> >  
> > +	if (!use_atags && !dtb_file) {
> > +		int f;
> > +
> > +		f = have_sysfs_fdt();
> > +		if (f)
> > +			dtb_file = SYSFS_FDT;
> > +	}
> > +
> > +	/*
> > +	 * dtb_buf can be allocated when checking zImage_with_dtb.
> > +	 * dtb_buf won't be allocated in the logic if dtb_file is
> > handed over
> > +	 * in argv[].
> > +	 */
> > +	if (dtb_file && !dtb_buf)
> > +		dtb_buf = slurp_file(dtb_file, &dtb_length);
> > +
> >  	if (use_atags) {
> >  		/*
> >  		 * use ATAGs from /proc/atags

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

  reply	other threads:[~2017-06-27  2:17 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-23  8:55 [PATCH] kexec:arm: support zImage with appended device tree Hoeun Ryu
2017-06-26  2:52 ` Dave Young
2017-06-27  2:13   ` Hoeun Ryu [this message]
2017-06-26  9:14 ` Russell King
2017-06-27  2:36   ` Hoeun Ryu
2017-06-27  8:53     ` Russell King
2017-06-27  9:51       ` Hoeun Ryu
2017-07-03 16:41         ` Russell King
2017-07-04  1:41           ` Dave Young
2017-07-04  2:09             ` Hoeun Ryu
2017-07-04  2:09           ` Hoeun Ryu
2017-06-26  9:15 ` Pratyush Anand
2017-06-27  2:52   ` Hoeun Ryu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1498529597.1734.2.camel@gmail.com \
    --to=hoeun.ryu@gmail.com \
    --cc=dyoung@redhat.com \
    --cc=horms@verge.net.au \
    --cc=kexec@lists.infradead.org \
    --cc=matthew.leach@arm.com \
    --cc=rmk@armlinux.org.uk \
    --cc=wangnan0@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox