From: Dave Young <dyoung@redhat.com>
To: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>,
linux-efi@vger.kernel.org, gnomes@lxorguk.ukuu.org.uk,
Chun-Yi Lee <jlee@suse.com>,
gregkh@linuxfoundation.org, kexec@lists.infradead.org,
linux-kernel@vger.kernel.org, David Howells <dhowells@redhat.com>,
linux-security-module@vger.kernel.org, keyrings@vger.kernel.org,
matthew.garrett@nebula.com
Subject: Re: [PATCH 09/24] kexec_file: Disable at runtime if securelevel has been set
Date: Fri, 7 Apr 2017 16:01:44 +0800 [thread overview]
Message-ID: <20170407080144.GC10737@dhcp-128-65.nay.redhat.com> (raw)
In-Reply-To: <1491551101.4184.48.camel@linux.vnet.ibm.com>
On 04/07/17 at 03:45am, Mimi Zohar wrote:
> On Fri, 2017-04-07 at 14:19 +0800, Dave Young wrote:
> > On 04/06/17 at 11:49pm, Mimi Zohar wrote:
> > > On Fri, 2017-04-07 at 11:05 +0800, Dave Young wrote:
> > > > On 04/05/17 at 09:15pm, David Howells wrote:
> > > > > From: Chun-Yi Lee <joeyli.kernel@gmail.com>
> > > > >
> > > > > When KEXEC_VERIFY_SIG is not enabled, kernel should not loads image
> > > > > through kexec_file systemcall if securelevel has been set.
> > > > >
> > > > > This code was showed in Matthew's patch but not in git:
> > > > > https://lkml.org/lkml/2015/3/13/778
>
> I specifically checked to make sure that either kexec_file() signature
> verification was acceptable and would have commented then, if it had
> not been included.
>
> > > > > Cc: Matthew Garrett <mjg59@srcf.ucam.org>
> > > > > Signed-off-by: Chun-Yi Lee <jlee@suse.com>
> > > > > Signed-off-by: David Howells <dhowells@redhat.com>
> > > > > cc: kexec@lists.infradead.org
> > > > > ---
> > > > >
> > > > > kernel/kexec_file.c | 6 ++++++
> > > > > 1 file changed, 6 insertions(+)
> > > > >
> > > > > diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
> > > > > index b118735fea9d..f6937eecd1eb 100644
> > > > > --- a/kernel/kexec_file.c
> > > > > +++ b/kernel/kexec_file.c
> > > > > @@ -268,6 +268,12 @@ SYSCALL_DEFINE5(kexec_file_load, int, kernel_fd, int, initrd_fd,
> > > > > if (!capable(CAP_SYS_BOOT) || kexec_load_disabled)
> > > > > return -EPERM;
> > > > >
> > > > > + /* Don't permit images to be loaded into trusted kernels if we're not
> > > > > + * going to verify the signature on them
> > > > > + */
> > > > > + if (!IS_ENABLED(CONFIG_KEXEC_VERIFY_SIG) && kernel_is_locked_down())
> > > > > + return -EPERM;
> > > > > +
> > > > >
> > >
> > > IMA can be used to verify file signatures too, based on the LSM hooks
> > > in kernel_read_file_from_fd(). CONFIG_KEXEC_VERIFY_SIG should not be
> > > required.
> >
> > Mimi, I remember we talked somthing before about the two signature
> > verification. One can change IMA policy in initramfs userspace,
> > also there are kernel cmdline param to disable IMA, so it can break the
> > lockdown? Suppose kexec boot with ima disabled cmdline param and then
> > kexec reboot again..
>
> Right, we discussed that the same method of measuring the kexec image
> and initramfs, for extending trusted boot to the OS, could also be
> used for verifying the kexec image and initramfs signatures, for
> extending secure boot to the OS. The file hash would be calculated
> once for both.
>
> All of your concerns could be addressed with very minor changes to
> IMA. (Continued in response to David.)
Thanks! As long as IMA can ensure not breaking the lockdown it should be
fine to add an check for either !CONFIG_KEXEC_VERIFY_SIG or !IMA
enforced.
>
> > >
> > > > /* Make sure we have a legal set of flags */
> > > > > if (flags != (flags & KEXEC_FILE_FLAGS))
> > > > > return -EINVAL;
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > kexec mailing list
> > > > > kexec@lists.infradead.org
> > > > > http://lists.infradead.org/mailman/listinfo/kexec
> > > >
> > > > Acked-by: Dave Young <dyoung@redhat.com>
> > > >
> > > > Thanks
> > > > Dave
> > > > --
> > > > To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
> > > > the body of a message to majordomo@vger.kernel.org
> > > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > >
> > >
> >
>
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
next prev parent reply other threads:[~2017-04-07 8:02 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <149142326734.5101.4596394505987813763.stgit@warthog.procyon.org.uk>
2017-04-05 20:15 ` [PATCH 07/24] kexec: Disable at runtime if the kernel is locked down David Howells
2017-04-07 3:07 ` Dave Young
2017-04-05 20:15 ` [PATCH 08/24] Copy secure_boot flag in boot params across kexec reboot David Howells
2017-04-05 20:15 ` [PATCH 09/24] kexec_file: Disable at runtime if securelevel has been set David Howells
2017-04-07 3:05 ` Dave Young
2017-04-07 3:49 ` Mimi Zohar
2017-04-07 6:19 ` Dave Young
2017-04-07 7:07 ` David Howells
2017-04-07 7:41 ` Dave Young
2017-04-07 8:28 ` Mimi Zohar
2017-04-07 8:42 ` Dave Young
2017-04-07 7:45 ` Mimi Zohar
2017-04-07 8:01 ` Dave Young [this message]
2017-04-07 7:09 ` David Howells
2017-04-07 7:46 ` Mimi Zohar
2017-04-07 9:17 ` David Howells
2017-04-07 12:36 ` Mimi Zohar
2017-04-10 13:19 ` David Howells
2017-05-02 19:01 ` Mimi Zohar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170407080144.GC10737@dhcp-128-65.nay.redhat.com \
--to=dyoung@redhat.com \
--cc=dhowells@redhat.com \
--cc=gnomes@lxorguk.ukuu.org.uk \
--cc=gregkh@linuxfoundation.org \
--cc=jlee@suse.com \
--cc=kexec@lists.infradead.org \
--cc=keyrings@vger.kernel.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=matthew.garrett@nebula.com \
--cc=mjg59@srcf.ucam.org \
--cc=zohar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox